- HOME
- POLYMER SEARCH
- Thermoplastic
- Styrene-Butadiene
- Styrene/Butadiene/Styrene (SBS)
- Polykemi AB POLYelast TPE ZS2606 Thermoplastic Elastomer, SEBS/SBS-based
Polykemi AB POLYelast TPE ZS2606 Thermoplastic Elastomer, SEBS/SBS-based
| Category | Polymer , Thermoplastic , Elastomer, TPE , Styrene-Butadiene , Styrene/Butadiene/Styrene (SBS) |
| Manufacturer | Polykemi AB |
| Trade Name | POLYelast |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polykemi AB POLYelast TPE ZS2606 Thermoplastic Elastomer, SEBS/SBS-based.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Polykemi AB
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.014 - 0.020 cm/cm | 0.014 - 0.020 in/in | With Flow; ISO 2577 |
| 0.014 - 0.020 cm/cm | 0.014 - 0.020 in/in | Across Flow; ISO 2577 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 60 @Time 15.0 sec |
60 @Time 0.00417 hour |
Polykemi |
| Tensile Strength at Break | <= 4.00 MPa | <= 580 psi | ISO/R527 |
| Elongation at Break | 670 % | 670 % | ISO/R527 |
| 100% Modulus | 0.00210 GPa | 0.305 ksi | ISO/R527 |
| 300% Modulus | 0.00280 GPa | 0.406 ksi | ISO/R527 |
| Compression Set | 24 % @Temperature 23.0 °C, Time 259000 sec |
24 % @Temperature 73.4 °F, Time 72.0 hour |
DIN 53517 |
| 79 % @Temperature 70.0 °C, Time 86400 sec |
79 % @Temperature 158 °F, Time 24.0 hour |
DIN 53517 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 180 - 220 °C | 356 - 428 °F | |
| Mold Temperature | 20.0 - 40.0 °C | 68.0 - 104 °F | |
| Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Holding Pressure () | Low | % of injection pressure |
| Injection Pressure | Low | |
| Injection Speed () | High |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Flexible XV3845 Polyvinyl Chloride, Flexible (PVC, Flexible)
- MV Labs I800 I2O5 Iodine(V) oxide
- Mitsubishi Xantar® G4F 22 UR Polycarbonate-20% Glass Reinforced
- Solvay Specialty Polymers Amodel® AFA-6145 V0 Z Polyphthalamide (PPA), 45% Glass Fiber
- Techmer ES Luriblend® PSU GF20 TL5 20% Glass Filled
- Denka VINYKON R2001 PVC, R grade for hard extrusion
- Ensinger DELRIN® 507 Black Acetal Homopolymer (POM)
- 3M FV513 Semi-Rigid Vinyl Label Product
- Techmer ES HiFill® PA6/6 GFB20 20% Glass/Glass Bead Filled
Copyright © lookpolymers.com All Rights Reserved