Zotefoams Plastazote® LD24LC Low Density Polyethylene Foam, Large Cell

Category	Polymer , Thermoplastic , Polyethylene (PE) , LDPE
Manufacturer	Zotefoams
Trade Name	Plastazote®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zotefoams Plastazote® LD24LC Low Density Polyethylene Foam, Large Cell.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outstanding physical attributes.Compliant with EC food contact and US FDA regulations.Information provided by Zotefoams

Physical Properties	Metric	English	Comments
Density	0.0190 - 0.0250 g/cc	0.000686 - 0.000903 lb/in³	sheet density
	0.0240 g/cc	0.000867 lb/in³	Nominal skin/skin; BS ISO 7214 1998
Cell Length	0.900 - 1.60 mm	0.0354 - 0.0630 in
	1.25 mm	0.0492 in	Typical Diameter

Mechanical Properties	Metric	English	Comments
Hardness, Shore OO	48	48	10 mm cell/cell thickness; ISO 868 1985
Tensile Strength	0.280 MPa	40.6 psi	ISO 7214 1998
Elongation at Break	110 %	110 %
Compressive Yield Strength	0.0300 MPa @Strain 10.0 %	4.35 psi @Strain 10.0 %	BS ISO 7214 1998
	0.0490 MPa @Strain 25.0 %	7.11 psi @Strain 25.0 %	BS ISO 7214 1998
	0.0770 MPa @Strain 40.0 %	11.2 psi @Strain 40.0 %	BS ISO 7214 1998
	0.109 MPa @Strain 50.0 %	15.8 psi @Strain 50.0 %	BS ISO 7214 1998
Tear Strength	0.535 kN/m	3.05 pli	BS EN ISO 8067 1995
Compression Set	4.5 % @Time 79200 sec, Strain 25.0 %	4.5 % @Time 22.0 hour, Strain 25.0 %	24 hr recovery; BS ISO 7214 1998
	11.5 % @Time 79200 sec, Strain 25.0 %	11.5 % @Time 22.0 hour, Strain 25.0 %	0.5 hr recovery; BS ISO 7214 1998
	16.5 % @Time 79200 sec, Strain 50.0 %	16.5 % @Time 22.0 hour, Strain 50.0 %	24 hr recovery; BS ISO 7214 1998
	25 % @Time 79200 sec, Strain 50.0 %	25 % @Time 22.0 hour, Strain 50.0 %	0.5 hr recovery; BS ISO 7214 1998

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.0506 W/m-K	0.351 BTU-in/hr-ft²-°F	mean temp of 10°C; ISO 8302 1991
Maximum Service Temperature, Air	100 °C	212 °F
Minimum Service Temperature, Air	-70.0 °C	-94.0 °F
Flammability Test	1.5 @Thickness 13.0 mm	1.5 @Thickness 0.512 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998
	2.1 @Thickness 5.00 mm	2.1 @Thickness 0.197 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998
Shrinkage	<= 1.0 % @Temperature 70.0 °C, Time 180000 sec	<= 1.0 % @Temperature 158 °F, Time 50.0 hour
	1.5 % @Temperature 70.0 °C, Time 1.80e+6 sec	1.5 % @Temperature 158 °F, Time 500 hour
	1.8 % @Temperature 80.0 °C, Time 3600 sec	1.8 % @Temperature 176 °F, Time 1.00 hour
	4.0 % @Temperature 80.0 °C, Time 180000 sec	4.0 % @Temperature 176 °F, Time 50.0 hour
	5.2 % @Temperature 80.0 °C, Time 1.80e+6 sec	5.2 % @Temperature 176 °F, Time 500 hour

Users viewing this material also viewed the following: