Zotefoams Plastazote® LD70 Low Density Polyethylene Foam

Category	Polymer , Thermoplastic , Polyethylene (PE) , LDPE
Manufacturer	Zotefoams
Trade Name	Plastazote®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zotefoams Plastazote® LD70 Low Density Polyethylene Foam.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outstanding physical attributes.Information provided by Zotefoams

Physical Properties	Metric	English	Comments
Density	0.0600 - 0.0760 g/cc	0.00217 - 0.00275 lb/in³	sheet density
	0.0700 g/cc	0.00253 lb/in³	Nominal skin/skin; BS ISO 7214 1998
Cell Length	0.600 mm	0.0236 in	Typical Diameter
	0.350 - 0.900 mm	0.0138 - 0.0354 in

Mechanical Properties	Metric	English	Comments
Hardness, Shore OO	74	74	10 mm cell/cell thickness; ISO 868 1985
Tensile Strength	0.740 MPa	107 psi	ISO 7214 1998
Elongation at Break	165 %	165 %
Flexural Modulus	0.00270 GPa	0.392 ksi	BS4370, part 4, method 14
Compressive Yield Strength	0.146 MPa @Strain 10.0 %	21.2 psi @Strain 10.0 %	BS ISO 7214 1998
	0.158 MPa @Strain 25.0 %	22.9 psi @Strain 25.0 %	BS ISO 7214 1998
	0.198 MPa @Strain 40.0 %	28.7 psi @Strain 40.0 %	BS ISO 7214 1998
	0.248 MPa @Strain 50.0 %	36.0 psi @Strain 50.0 %	BS ISO 7214 1998
Tear Strength	2.075 kN/m	11.84 pli	BS EN ISO 8067 1995
Compression Set	2.0 % @Time 79200 sec, Strain 25.0 %	2.0 % @Time 22.0 hour, Strain 25.0 %	24 hr recovery; BS ISO 7214 1998
	5.0 % @Time 79200 sec, Strain 25.0 %	5.0 % @Time 22.0 hour, Strain 25.0 %	0.5 hr recovery; BS ISO 7214 1998
	6.0 % @Time 79200 sec, Strain 50.0 %	6.0 % @Time 22.0 hour, Strain 50.0 %	24 hr recovery; BS ISO 7214 1998
	13 % @Time 79200 sec, Strain 50.0 %	13 % @Time 22.0 hour, Strain 50.0 %	0.5 hr recovery; BS ISO 7214 1998

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.0500 W/m-K	0.347 BTU-in/hr-ft²-°F	mean temp of 10°C; ISO 8302 1991
Maximum Service Temperature, Air	105 °C	221 °F
Minimum Service Temperature, Air	-70.0 °C	-94.0 °F
Flammability Test	0.60 @Thickness 13.0 mm	0.60 @Thickness 0.512 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998
	1.0 @Thickness 5.00 mm	1.0 @Thickness 0.197 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998
Shrinkage	<= 1.0 % @Temperature 80.0 °C	<= 1.0 % @Temperature 176 °F
	<= 2.0 % @Temperature 90.0 °C	<= 2.0 % @Temperature 194 °F

Users viewing this material also viewed the following: