Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.948 g/cc | 0.0342 lb/in³ | ASTM D1505 |
Network Polymers NPP 50-0548 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Density | 0.948 - 0.952 g/cc | 0.0342 - 0.0344 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 4850B (504H3) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.948 - 0.952 g/cc | 0.0342 - 0.0344 lb/in³ | Base Resin; ASTM D1505 |
NIZHNEKAMSKNEFTEKHIM PE 6750H (506H8) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® HB-W646-U HDPE Blow Molding Resin Features: High molecular weight HDPEExcellent ESCRImpact strengthGood processability Applications: DrumsJerry cansIBCsMarine fuel tanksInformation provided by Nova Chemicals |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® HB-W747-A HDPE Extrusion Resin Molded Plaque Properties. Features: High molecular weight, excellent ESCR, impact strength, easy processing.Data provided by the manufacturer. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | Compounded; ASTM D792 |
NOVA Chemicals Novapol® TE-0546-GBK Hexene MDPE Extrusion Resin Very good impact, Excellent ESCR, Sub 50 mesh particles sizeApplications: Powder coating of pipes, values, and fittings to produce a corrosion-resistant coating for buried pipe systemsAdditives: Ant.. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D792 |
NOVA Chemicals Sclair® 56B4 HDPE Blow Molding Resin Extra-high stress crack resistance, Good processabilityApplications: Very high ESCR, Ideally suited for use in most food, pharmaceutical, households and industrial chemical applications, Little/no s.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | Exxon Method |
ExxonMobil Optema® TC-221 Ethylene Methyl Acrylate for Compounding
(discontinued **) Data provided by the manufacturer, Exxon Chemical.27% Methyl Acrylate. An Ethylene Methyl Acrylate copolymer which can be used for making alloys, blends, and compounds, or be injection molded where.. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D4883 |
Eastman M30033-P Voridian Polyethylene
(discontinued **) VORIDIAN M30033-P polyethylene is suggested for applications such as spiral-wound can linings, release paper and photographic paper. M30033-P has been found to exhibit good barrier properties, tempe.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
Chevron Phillips HiD® 9326 HDPE Natural Pipe Resin
(discontinued **) Resin Type: Linear Copolymer; PE3408 Pipe Resin; ASTM D 3350 Classification: 335440A; ASTM D 4976 Classification: PE 235, A 56606Applications:Base Resin for use in Oil Patch and Industrial Pipe Appl.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | ASTM D4883 |
Eastman M2001-P Polyethylene
(discontinued **) M2001-P polyethylene is suggested for applications such as spiral-wound can linings, release paper and photographic paper. M2001-P has been found to exhibit good barrier properties, temperature res.. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D1505 |
Chevron Phillips Marlex® HHM TR-140 Polyethylene, Film Grade; HDPE
(discontinued **) FDA approved.Data provided by the manufacturer |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D1505 |
DuPont Elvax® 4320 Ethylene Vinyl Acetate
(discontinued **) DuPont™ Elvax® 4320 is an ethylene-vinyl acetate / acid terpolymer resin for use in industrial applications.ApplicationsElvax® 4320 resins can be used for the following applications: adhesives, s.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
Reliance Industries Relene F46003 Polyethylene Relene F46003 is a High Density Polyethylene grade suitable for producing blown parts with superior stiffness and barrier properties. It is recommended for making liners and coextruded film structu.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® ETP H4745 High Density Polyethylene ApplicationsALATHON H 4745 is a new, multi-purpose, high-flow resin featuring enhanced cold temperature impact performance, enhanced processability and thermal stability for fast cycling and exhibit.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® ETP H4837 High Density Polyethylene ApplicationsALATHON H 4837 is a high-flow “freezer†grade resin that exhibits enhanced cold temperature impact performance, enhanced processability and thermal stability, with good color a.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® M4661 High Density Polyethylene ApplicationsALATHON M 4661, formerly known as LYHD 060, exhibits excellent impact, warp and environmental stress crack resistance. Typical applications are closures, institutional seating and consum.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | ASTM D1505 |
ICO Polymers ICORENEâ„¢ 150-1500 HDPE Rotational Molding Resin Description: ICORENE 150-1500 polyethylene developed for use in rotational molding. It has very high stiffness, toughness, and scratch resistance combined with good processability. This product is .. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | HPC-3 Curative |
Lord Adhesives HPC-3C Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Polidan® T/A-LX Polyethylene, Crosslinked (XLPE) POLIDAN® T/A-LX is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes.Featu.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | DIN 53479/ASTM D1505 |
Silon Taborex TA 1117HD Chemically-Crosslinkable HDPE Compound TABOREX TA 1117 HD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a Masterbatch containing the crosslinking catalyst a “SIOPLA.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | ISO 1183 |
Borealis BorSafe™ ME3420 MDPE Compound for Pressure Pipes BorSafe™ ME3420 is a bimodal polyethylene compound produced by the advanced Borstar® technology. Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an .. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D 792 |
Total HL 428 HDPE film resin Applications: multi-wall liner, poultry multi-layer gas flush bags, mailing envelopes, heavy-duty shipping sacks, fresh cut produce packaging, coextrusionInformation provided provided by Total Petro.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | ExxonMobil method |
ExxonMobil Escorene™ UL 15028CC Ethylene Vinyl Acetate Copolymer (European Grade) Product Description: UL 15028CC is a copolymer of ethylene and vinyl acetate.Availability: Africa & Middle East and Europe Additive: Antiblock: NoSlip: No Thermal Stabilizer: Yes Free Flowing Agent.. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | ExxonMobil method |
ExxonMobil Escorene™ UL 40028EM1 Ethylene Vinyl Acetate Copolymer (European Grade) Product Description: UL 40028EM1 is a copolymer of ethylene and vinyl acetate.Availability: Africa & Middle East and Europe Additive: Antiblock: NoSlip: No Thermal Stabilizer: Yes Free Flowing Agen.. |
|||
Density | 0.946 g/cc | 0.0342 lb/in³ | ASTM D4883 |
ExxonMobil HDPE BU46-055 High Density Polyethylene Resin Product Description: BU46-055 is a high molecular weight, high density polyethylene copolymer which contains a UV inhibitor. It possesses a combination of excellent processability, outstanding melt .. |
|||
Density | 0.948 g/cc | 0.0342 lb/in³ | Exxon Method |
ExxonMobil Optema® TC-114 Blown Ethylene Methyl Acrylate Product Description: Optema TC 114 is an ethylene methyl acrylate copolymer specifically formulated to offer extrusion and property performance for blown film applications. It produces a soft, elast.. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM-D792 |
Braskem GM5010T2B HDPE High Density Extrusion Polyethylene GM5010T2B is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes for water distribution. It is produced with bimodal technology and has high molar mass. .. |
|||
Density | 0.947 g/cc | 0.0342 lb/in³ | Part B |
Abatron AboCast 8103-23 High-Performance Dielectric Epoxy AboCast 8103-23 is a dielectric in/outdoor epoxy system with superior arc-track resistance, high voltage and heat resistance, low ash and ion content, and it is chlorine-free. This system has a comb.. |