Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.02 g/cc | 0.0368 lb/in³ | ISO 1183 |
Polyplastic Armlen® PP MF 20-3IM Impact Modified Polypropylene Impact modified polypropylene composite materialInformation provided by PolyPlastic Group. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | |
Premix Thermoplastics PRE-ELEC® CP 1317 PRE-ELEC CP 1317 is a conductive thermoplastic compound based on EVA. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC CP 1317 .. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | Finaprene 2602 Method |
Total Finaclear® 530 Clear Impact Polystyrene
(discontinued **) Finaclear® 530 is a clear high styrenic styrene-butadiene (SBS) elastomer, providing dramatically improved impact properties and tear resistance to finished articles, when used in blends with other.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | |
Premix Thermoplastics PRE-ELEC® PE 1308
(discontinued **) PRE-ELEC PE 1308 is a conductive thermoplastic compound based on a blend of PE-LD/PE-LLD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivi.. |
|||
Density | 1.02 - 1.07 g/cc @Temperature 260 - 260 °C |
0.0368 - 0.0387 lb/in³ @Temperature 500 - 500 °F |
Average value: 1.05 g/cc Grade Count:2 |
Overview of materials for Polycarbonate/ABS Alloy, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/ABS Alloy, Glass Fiber Filled". Each property range of values reported is minimum and maxi.. |
|||
Density | 1.02 - 1.02 g/cc @Temperature 280 - 300 °C |
0.0368 - 0.0368 lb/in³ @Temperature 536 - 572 °F |
Average value: 1.02 g/cc Grade Count:6 |
Overview of materials for Polycarbonate, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Impact Modified". Each property range of values reported is minimum and maximum values of.. |
|||
Density | 1.02 - 1.45 g/cc | 0.0368 - 0.0524 lb/in³ | Average value: 1.24 g/cc Grade Count:79 |
Overview of materials for Polypropylene with 40% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Calcium Carbonate (CaCO3) Filler". Specific grades with primary filler content be.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® CK02 Styrene-Butadiene Copolymer, Blow Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: CK02 is a blow molding SBC designed to provide a softer, tougher, more flexible container while retaining the clarity and gloss of bottles produced from.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRILOY R2000A PA 66 (Europe-Africa-Middle East) LNP LUBRILOY* R2000A is a compound based on Nylon 66 resin containing Proprietary Lubricant. Added features of this material include: Internally Lubricated. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ISO 1183 |
Styrolution Terluran® HI-12 ABS Terluran HI-12 is an injection molding grade of ABS with a very high toughness and easy flow.Very high toughnessEasy flowingUL 94 HB (1.6 & 3.2 mm)Information provided by Styrolution |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | |
Solvay MACKPEARL® 202 Surfactant Product Description: Mackpearl 202 is a high-active liquid pearling agent designed for easy dispersibility at ambient temperatures. Mackpearl 202 is added slowly to the batch with moderate agitation.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA12 E HS Availability: North AmericaForms: PelletsAdditive: Heat StabilizerFeatures: Heat StabilizedProcessing Method: ExtrusionInformation provided by TP Composites, Inc. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | |
Sax Polymers SAXLAC 310T Acrylonitrile Butadiene Styrene Saxalac 310T is an antistatic, high impact resistant ABS injection molding grade, characterized by good processability and high stiffness.Mechanical property data tested at 50% RH.Information provid.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ISO 1183 |
Topas Advanced Polymers TOPAS® 5013F-04 Cyclic Olefin Copolymer (COC) TOPAS® 5013F-04 is a high temperature film extrusion grade for blends. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity .. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ISO 1183 |
Topas Advanced Polymers TOPAS® 8007F-400 Cyclic Olefin Copolymer (COC) TOPAS® 8007F-400 is a robust film extrusion grade designed for blending with polyethylene (PE). It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, .. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® XK40 Styrene-Butadiene Copolymer, Sheet Grade Styrene-Butadiene CopolymerCustomer Benefits: XK40 is an extrusion grade SBC designed specifically for superior performance in blends with general purpose polystyrene. Compared to KK38, KX40 offers.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | Melt |
Covestro Desmopan® DP 2786A Polyurethane Coating gradedoes not contain any anti-hydrolysis agentfood contact applications are possiblecontact our HSEQ departmentApplicationTextile coatingPreprocessingMax. Water content |
|||
Density | 1.02 g/cc @Temperature 260 °C |
0.0368 lb/in³ @Temperature 500 °F |
Melt |
Covestro Makroblend® DP UT5007 Polycarbonate + PBT, Impact Grade Developmental product(PC+PBT)-blendimpact modifiedeasy releaseUV-stabilizedinjection molding grade Makroblend DP UT5007* provides an outstanding balance of low-temperature impact strength and flow.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | Melt |
Covestro Makrolon® 3158 Polycarbonate Key Features:Release agentUnfilledSuitable processing methods:Injection moldingExtrusionBlow moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated.. |
|||
Density | 1.02 g/cc @Temperature 280 °C |
0.0368 lb/in³ @Temperature 536 °F |
Melt |
Covestro Makrolon® LED2045 Polycarbonate ISO 7391-PC,MRT,(,,)-24-9Global gradeMVR (250 °C/2.16 kg) 16.5 cm3/10minLight guidesPC with highest transmissionLow viscosityEasy releaseInjection molding - Melt temperature 280 - 320 °CAvailable .. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
Arkema Group Pebax® 7233 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Density | 1.02 - 1.05 g/cc | 0.0368 - 0.0379 lb/in³ | |
BASF Neopor® 2300 Expandable Polystyrene Description: Expandable polystyrene (EPS) containing uniformly distributed flame retardant (blowing agent: pentane).Remarks: For the production of flame-retardant silver-gray foams having a consider.. |
|||
Density | 1.02 - 1.05 g/cc | 0.0368 - 0.0379 lb/in³ | |
BASF Styropor® F 215 L-N Expandable Polystyrene Description: Expandable polystyrene (EPS) containing a uniformly distributed came retardant (blowing agent: pentane)Remarks: For the manufacture of flame-retardant foams.Applications: Low-density bl.. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
Multibase Multi-Flam™ 0106 PP Black Polypropylene Features:Flame Retardant Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Density | 1.02 - 1.04 g/cc | 0.0368 - 0.0376 lb/in³ | |
Silikony Polskie Silpasta Z Silicone Paste A consistency of hard VaselineLubricating agent to dampen vibrations in transmission gears and other mobile element made of plastic. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP FP003 PE (Europe-Africa-Middle East) LNP *Lubricomp* FP003 is a compound based on Polyethylene resin, containing PTFE and Silicone. Added features include: Internally Lubricated. |
|||
Density | 1.02 g/cc | 0.0368 lb/in³ | |
BorsodChem ONGROCLEAN 5 anti-scaling agent Ongroclean 5 is anti scaling agent for PVC polymerization. Composition of the material: Caustic solution of composite formed by bicycled phenols with formaldehyde. Low viscosity, odorless liquid.Fie.. |