Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183-1 |
Murtfeldt Murinyl® Polyvinylidinefluoride As a fluorinated plastic, Murinyl® is exceptionally resistant to chemicals, hydrolysis, and sterilization. Its properties change very little at high service temperatures and after long-term exposur.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Rogers Corporation RO4003C Glass-Reinforced Hydrocarbon and Ceramic Laminate with Thin Film Resistor Foil RO4000® Series High Frequency Circuit Materials are glass-reinforced hydrocarbon and ceramic (not PTFE) laminates with TICER™ TCR® Thin Film Resistor Foils. These laminates are designed for perf.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Blue
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Natural Color
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 51240 PET, Pellet, Injection Molded, Blue
(discontinued **) PLENCO 51240 is an engineering grade glass reinforced flame retarded recycled polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed.Information supplied by P.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
SGL Carbon Group EK 2243 Carbon Graphite Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP WFL369 PBT (Europe-Africa-Middle East) LNP* LUBRICOMP* WFL369 is a compound based on Polybutylene Terephalate resin containing Glass Fiber, PTFE. Added features include: Flame Retardant, Internally Lubricated. |
|||
Density | 1.79 g/cc @Temperature 25.0 °C |
0.0647 lb/in³ @Temperature 77.0 °F |
|
Solvay Specialty Polymers Galden® HT200 PFPE Heat Transfer Fluid Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Techmer ES HiFill® TPX-PVDF-03009 C Availability: North AmericaForms: PelletsFiller/Reinforcement: Mineral FillerFeatures: Low Shrinkage and Low Smoke EmissionInformation provided by TP Composites, Inc. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America 4064 Mineral Filled Electrical Encapsulation Grade Epoxy Rogers electrical encapsulation grade epoxy is recommended for capacitors, resistors, gold lead encapsulation, relays, coils and bobbins.Information provided by Sumitomo Bak North America, Inc. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Cosmic Plastics 6220 Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Cosmic Plastics 6220F Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
Vyncolit Neopreg Kinel® SK80 L8G Glass Fiber Reinforced Molding Compound Epoxy based molding compound long glass fiber reinforced with excellent long term property retention over a wide temperature range and climate conditions. It is particularly suited for over mold.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 12K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 24K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M56 180°C (350°F) Out-of-Autoclave Curing Matrix, M56/40%/285T2/AS4C-6K Fiber: AS4C, Weave: 2x2T, 295 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ AS7 Carbon Fiber HexTow™ AS7 carbon fiber is a continuous, high strength, high strain, PAN based fiber available, in a 12,000 (12K) filament count tow. This fiber has been surface treated and can be sized to improv.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® IM8 Carbon Fiber (12,000 Filaments) Weight/length = 0.446 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (12,000 Filaments) Weight/length = 0.858 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (6000 Filaments) Weight/length = 0.427 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 - 1.85 g/cc | 0.0647 - 0.0668 lb/in³ | Molded |
Bulk Molding Compounds BMC A50-XHS High Strength Grade Molding Compound BMC A50-XHS is a high strength bulk molding compound. Due to the excellent flow and controlled reactivity, BMC A50-XHS is well suited for injection, transfer or compression molding. Typical applic.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M56 180°C (350°F) Out-of-Autoclave Curing Matrix, M56/37%/280H5/AS4-3K Fiber: AS, Weave: 5HS, 280 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ AS4 Carbon Fiber HexTow™ AS4 carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K), and 12,000 (12K) filament count tows. The fiber has been surface treated a.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® HexTow™ AS4D Carbon Fiber HexTow™ AS4D carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. The fiber has been surface treated and can be sized to improve .. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Green
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP KONDUIT PX11313 PA 6 (Europe-Africa-Middle East) Thermally conductive mineral and glass fiber filled PA6, FR, compliant with ECO protocols, non-brominated, non-chlorinated |
|||
Density | 1.79 - 1.92 g/cc | 0.0647 - 0.0694 lb/in³ | Molded |
Bulk Molding Compounds BMC T40(18) Die Casting Replacement Grade Molding Compound BMC T40(18) was formulated as a direct replacement for aluminum die casting applications. T40(18) is UL recognized. Excellent mechanical properties and dimensional control allow molded parts to ma.. |