Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183-1 |
Murtfeldt Murinyl® Polyvinylidinefluoride As a fluorinated plastic, Murinyl® is exceptionally resistant to chemicals, hydrolysis, and sterilization. Its properties change very little at high service temperatures and after long-term exposur.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP KONDUIT PX11313 PA 6 (Asia Pacific) Thermally conductive mineral filled PA6 FR compounding |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Natural Color
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 51240 PET, Pellet, Injection Molded, Black
(discontinued **) PLENCO 51240 is an engineering grade glass reinforced flame retarded recycled polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed.Information supplied by P.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP WFL369 PBT (Europe-Africa-Middle East) LNP* LUBRICOMP* WFL369 is a compound based on Polybutylene Terephalate resin containing Glass Fiber, PTFE. Added features include: Flame Retardant, Internally Lubricated. |
|||
Density | 1.79 g/cc @Temperature 25.0 °C |
0.0647 lb/in³ @Temperature 77.0 °F |
|
Solvay Specialty Polymers Galden® LS200 PFPE VPS Fluid Galden® LS and HS grades are specifically recommended for vapor phase soldering.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Techmer ES HiFill® TPX-PVDF-03009 C Availability: North AmericaForms: PelletsFiller/Reinforcement: Mineral FillerFeatures: Low Shrinkage and Low Smoke EmissionInformation provided by TP Composites, Inc. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America 4064 Mineral Filled Electrical Encapsulation Grade Epoxy Rogers electrical encapsulation grade epoxy is recommended for capacitors, resistors, gold lead encapsulation, relays, coils and bobbins.Information provided by Sumitomo Bak North America, Inc. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6/6 GF70 HS L BK 70% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 70% Filler by WeightAdditive: Lubricant and Heat StabilizerFeatures: Lubricated and Heat StabilizedUL File N.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America 52-40-40-P Long-Glass Reinforced Diallyl Phthalate Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type GDI-30F.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Cosmic Plastics 6220 Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Cosmic Plastics 6220F Short Glass Fiber Filled Iso Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
Vyncolit Neopreg Kinel® SK80 L8G Glass Fiber Reinforced Molding Compound Epoxy based molding compound long glass fiber reinforced with excellent long term property retention over a wide temperature range and climate conditions. It is particularly suited for over mold.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Tipco Tipcolite® VASW 200 Phenolic Compound, Long Glass Fiber, in fluffy form, Medium -Soft Flow & Very High Strength |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G30-700 24K HTA-7D F402 Continuous Filament Carbon Fiber Standard Modulus; Wide Band; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho Carb.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 12K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 24K IMA5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Toho Tenax Besfight® G40-800 6K IMA-5C EP03 Continuous Filament Carbon Fiber Intermediate Modulus; Collimated; Polyacrylonitrile (PAN) based fiberTypical values; measured by Toho Strand Test Method based on JIS R7601 for fiber selection purposes. Information provided by Toho.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4D Carbon Fiber (12,000 Filaments) Weight/length = 0.765 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | Fibre |
Hexcel® HexPly® M48 180°C/356°F Curing Epoxy Matrix, M48/35%/150/IM7 GS Fiber: IM7 GS, UD, 150 g/m2Information provided by HexCel |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® IM9 Carbon Fiber (12,000 Filaments) Weight/length = 0.331 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (12,000 Filaments) Weight/length = 0.858 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | |
Hexcel® AS4 Carbon Fiber (3000 Filaments) Weight/length = 0.210 g/m.Information provided by Hexcel Corporation. Values are typical average lot properties.Continuous fiber can be combined with virtually all thermoset and thermoplastic resin.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ISO 1183 |
DuPont Performance Polymers Rynite® FR543 NC010 PET Rynite® FR543 NC010 is a flame retardant, 43% glass reinforced polyethylene terephthalate. Has a 155C temperature index that is equivalent to many thermosets. Recognized by UL as UL94V-0 at 0.8mm.. |
|||
Density | 1.79 g/cc @Temperature -40.0 °C |
0.0647 lb/in³ @Temperature -40.0 °F |
|
3M Novec™ 649 Engineered Fluid 3M™ Novec™ 649 Engineered Fluid is a clear, colorless and low odor fluid, one in a line of 3M products designed as replacements for ozone depleting substances (ODSs) and compounds with high global.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Black
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
Plenco 50240 PET, Pellet, Injection Molded, Green
(discontinued **) PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black.. |
|||
Density | 1.79 - 1.99 g/cc | 0.0647 - 0.0719 lb/in³ | Molded |
Bulk Molding Compounds BMC T15(GPS) General Purpose Molding Compound BMC T15(GPS) is a high strength, low shrink general purpose molding compound. Due to the excellent flow and controlled reactivity, BMC T15(GPS) is well suited for injection, transfer or compression.. |