Physical Properties | Metric | English | Comments |
---|---|---|---|
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Tapped |
Nyco NYAD® G Wollastonite High aspect ratio grade. This grade is recommended for polymer reinforcement.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctiv.. |
|||
Bulk Density | 0.800 - 1.00 g/cc | 0.0289 - 0.0361 lb/in³ | |
Nabaltec NABALOX® NO 105 Calcined Aluminum Oxide NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.800 - 1.00 g/cc | 0.0289 - 0.0361 lb/in³ | |
Nabaltec NABALOX® NO 105 RA Calcined Aluminum Oxide NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.800 - 1.00 g/cc | 0.0289 - 0.0361 lb/in³ | |
Nabaltec NABALOX® NO 713-40 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.800 - 1.00 g/cc | 0.0289 - 0.0361 lb/in³ | |
Nabaltec NABALOX® NO 715-10 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.800 - 1.00 g/cc | 0.0289 - 0.0361 lb/in³ | |
Nabaltec NABALOX® NO 725-10 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | PEPL-10-W-67 |
Pearl Engineering PEPLPET FR-101-H Monofilament Resin Used as textile grade flame retardant for furniture, car and plane upholstery. |
|||
Bulk Density | 0.801 g/cc | 0.0289 lb/in³ | Poured; ASTM D1895 |
Eastman Aqua 18696 PET
(discontinued **) Voridian Aqua thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. Containers made from 186.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | |
Invista 2201 PET Copolymer Packaging Resin
(discontinued **) Carboxyl end groups: |
|||
Bulk Density | >= 0.800 g/cc | >= 0.0289 lb/in³ | Pycnometer test |
Invista 2202 Copolymer Packaging Resin
(discontinued **) Carboxyl end groups: |
|||
Bulk Density | 0.800 - 0.900 g/cc | 0.0289 - 0.0325 lb/in³ | PEPL-10-W-67 |
Pearl Engineering PEPLPET B-103C PET Bottle Grade A co-polymer used for mineral water bottles |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
FKuR Kunststoff Bio-Flex® F 6510 Compostable PLA Blend The BIO-FLEX® trade name indicates blends of co-polyester and PLA* with, depending on the particular grade, a very high content of natural resource material. BIO-FLEX® does not contain any sta.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
Lanxess Pocan® BF 4232 000000 PBT, 30% Glass Fiber PBT, 30% glass fiber, injection molding, flame retardantInformation provided by LANXESS. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
Lanxess Pocan® ECO T 3240 000000 PBT + PET, 45% Glass Fiber PBT + PET, 45% glass fibers, injection molding, improved surface finish, contains 25% post-consumer recycled material, increased temperature peak loadInformation provided by LANXESS. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
Lanxess Pocan® T 7391 POS151 900044 PBT + PET, 45% Glass Fiber PBT + PET, 45% glass fibers, injection molding, improved surface finish, increased temperature peak load UV stabilizedInformation provided by LANXESS. |
|||
Bulk Density | >= 0.801 g/cc | >= 0.0289 lb/in³ | |
Indorama Auriga Polymers Polyclear™ Perserve 2201 PET Resin Description: Polyclear® Preserve PET 2201 is designed to offer exceptional performance in hot-fill and pasteurized container applications. It has a nominal intrinsic viscosity of 0.82 dl/g. Packa.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
Lanxess Pocan® C 1202 000000 PET + PC PBT + PC, non-reinforced, injection molding, improved impact strength, low tendency to warp, UV-stabilizedInformation provided by LANXESS. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder Density; ASTM D1895 |
Sumitomo Bakelite North America E 8940SG Electrical Encapsulation Grade Epoxy Mineral reinforced epoxy molding compound formulated for the encapsulation of electronic devices requiring high quality, exceptional reliability, and outstanding moldability. USES: Passive electron.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder; ISO 60 |
Sumitomo Bakelite North America RX® 630 Fiberglass Reinforced Phenolic RX 630 is a fiberglass reinforced phenolic molding compound, with good dimensional stability and good strength at elevated temperatures. Information supplied by Sumitomo Bak North America. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ASTM D1895 |
Sumitomo Bakelite North America Epiall® 2061B-1 Mineral and Glass Filled Electrical Encapsulation Grade Epoxy Epiall 2061B-1 is a fiberglass and mineral reinforced epoxy molding compound, with excellent dimensional stability, good electrical insulation properties, and good strength.Information provided by S.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ASTM D894 |
Daikin POLYFLON M-391 PTFE Molding Powder, Free Flow Free flow powder.Processing Methods: Compression molding and automatic or semi-automatic compression molding.Features: Used if concerned about insufficient molding pressure for flat sheets.Informati.. |
|||
Bulk Density | >= 0.800 g/cc | >= 0.0289 lb/in³ | |
Chosun Refractories LW-28 Special Insulating Firebrick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
Bulk Density | 0.801 g/cc | 0.0289 lb/in³ | Dow Method |
Dow XU 32019.10 Barrier Polymer Excellent oxygen and water vapor barrier Information provided by Dow |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | |
3M Dyneon™ Dynamar™ FX 9613 Polymer Processing Additive Dynamar polymer processing additive FX 9613 is a free flowing granular concentrate form of a fluoropolymer designed for use at very low levels to improve the processing of thermoplastics. At the ver.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | DIN 53466 |
3M Dyneon™ PFA 6503PAZ Fluoroplastic Powder 3M™ Dyneon™ Fluoroplastic Powder PFA 6503PAZ is a fluorothermoplastic powder designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tan.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | DIN 53466 |
3M Dyneon™ PFA 6503PBZ Fluoroplastic Powder 3M™ Dyneon™ Fluoroplastic Powder PFA 6503PBZ is a fluorothermoplastic powder with excellent thermal stability characteristics, designed for use in thin film powder coatings. Typical applications i.. |
|||
Bulk Density | 0.800 - 0.900 g/cc | 0.0289 - 0.0325 lb/in³ | |
Addcomp ADD-VANCE® BA 401 Blowing agent Fields of application: Foamed products of Polyolefin and other polymers.Examples: Extruded sheets and foams in general as well as injection molded parts that require a foamed core.Mode of action and.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | ISO 60 |
Lanxess Pocan® C 1206 000000 PET + PC PET + PC, non-reinforced, injection molding, improved impact strengthInformation provided by LANXESS. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder; ASTM D1895 |
Sumitomo Bakelite North America FM 4005 Fiberglass Reinforced Phenolic Novolac FM 4005 is a fiberglass reinforced phenolic novolac molding compound, with excellent dimensional stability and good strength at elevated temperatures. This material is compliant with the specificat.. |
|||
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder; ASTM D1895 |
Sumitomo Bakelite North America FM 4009 Fiberglass Reinforced Phenolic Novolac FM 4009 is a fiberglass reinforced phenolic novolac molding compound formulated for excellent wear resistance.Information supplied by Sumitomo Bak North America. |