Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.80 - 1.95 g/cc | 1.80 - 1.95 g/cc | |
Premix Premi-Glas® 3101-25 Polyester BMC Premi-Glas® 3101-25 is a 25% glass reinforced thermoset Bulk Molding Compound designed for electrical and flame retardant applications. Key features and benefits are: Underwriters Laboratories, UL .. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
Parker Chomerics CHO-SHIELD® 576 Platable Silver Epoxy Coating Description: CHO-SHIELD® 576 coating is a two component, silver filled, highly conductive epoxy paint designed to provide EMI shielding when applied to a dielectric plastic substrate. This coating .. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | ASTM D792 |
Parker Chomerics THERM-A-GAP™ 575-NS Silicone-Free Soft Acrylic Thermally Conductive Gap Filler Pad Ceramic Filled AcrylicDescription: THERM-A-GAP™ acrylic gap filler pads are used in silicone sensitive applications.Features/Benefits: Economical with good thermal conductivity; No silicone outgass.. |
|||
Specific Gravity | 1.80 - 1.90 g/cc | 1.80 - 1.90 g/cc | ISO 1183 |
Raschig Group DECAL® 666/8/2B Phenolic Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This product meets the allowe.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | ASTM D792 |
Custom Resins Vexel™ E20GF45 FR , 45% Glass Reinforced, Flame Retardant PET
(discontinued **) Description: Vexel™ E20GF45 FR is a 45% glass fiber reinforced, flame retardant PET. Information provided by Custom Resins. |
|||
Specific Gravity | 1.80 - 1.90 g/cc | 1.80 - 1.90 g/cc | ASTM D792 |
Mar-Bal MB2000-10 Thermoset Polyester Composite Molding Compound An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.Mar-Bal standard grades can.. |
|||
Specific Gravity | 1.80 - 1.85 g/cc | 1.80 - 1.85 g/cc | ASTM D792 |
Mar-Bal MB3000-15 Thermoset Polyester Composite Molding Compound A superior chemical resistant material with excellent flame and track resistance.Mar-Bal standard grades can be injection, compression and transfer molded.Information provided by Mar-Bal, Inc. |
|||
Specific Gravity | 1.80 - 1.90 g/cc @Thickness 1.57 mm |
1.80 - 1.90 g/cc @Thickness 0.0620 in |
ASTM D792 |
Industrial Laminates/Norplex NP511 Glass Fabric Description: Woven glass fabric with high temperature epoxy resin. Excellent mechanical strength and electrical properties at elevated temperatures. Continuous operating temperature is 165°C. Mat.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | ASTM D792 |
Haysite H900 Polyester, Glass Reinforced H900 is recognized throughout the world as a reliable, consistent GPO-3 material. Standard size sheets are available in thicknesses ranging from .094" to 2.00". H900 also exhibits excellent smoke,.. |
|||
Specific Gravity | 1.80 - 1.84 g/cc | 1.80 - 1.84 g/cc | |
Shandong Dongyue Shenzhou New Material Co DS2603 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
Silberline Sparkle Silver® Premier 132AR Sparkle Silver® Premier flakes provide more uniform surfaces than Sparkle Silver® products, and also sharper edges and controlled particle size distribution. "Sparkle Silver® Premier or Sil.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP 2FL24 ETFE LNP* THERMOCOMP* 2FL24 is a compound based on ETFE resin containing 20% Glass Fiber, 10% PTFE. Added feature of this grade is Wear Resistant. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
Epoxy Technology EPO-TEK® T6067-3 Thermally Conductive, Electrically Insulating Epoxy Preliminary Product Information SheetMaterial Description: A single component, thermally conductive, electrically insulating epoxy designed for microelectronic packaging and assemblies. It may be u.. |
|||
Specific Gravity | 1.80 - 1.90 g/cc | 1.80 - 1.90 g/cc | ASTM D792-66 |
BCC Products Kwik Kast BC 8645 Urethane Casting BCC Kwik Kast/Gray is a two component, fast setting polyurethane reproduction plastic. BC8645 has been reformulated to enhance filler suspension and avoid hard packing @ 77ºF. Uses include; tracing.. |
|||
Specific Gravity | 1.80 - 1.90 g/cc | 1.80 - 1.90 g/cc | ASTM D792-66 |
BCC Products SLO-KAST BC 8009 Urethane Casting Slo-Kast is a low viscosity, medium setting, easy to use casting material. This polyurethane system features extremely low shrinkage when properly cured. Unlike Kwik-Kast, BC 8009 offers the user lo.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FC 2176 Fluoroelastomer Composition: di-polymer of vinylidene fluoride and hexafluoropropyleneAbility for fast cure cycles with excellent processing safetyMedium viscosityProcess targets: compression and transfer molding, .. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FC 2210 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomers FC 2210 can be incorporated into other fluoroelastomers using standard water cooled internal mixers or two-roll mills
with standard fillers and ingredients utilized .. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FE 5520 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5520 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FE 5623 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5623 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FE 5640Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5640Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FG 5630Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FG 5630Q can be compounded using standard water cooled internal mixers or two-roll mills. The “dry” ingredients should be blended before adding to the masticated gum... |
|||
Specific Gravity | 1.80 - 1.90 g/cc | 1.80 - 1.90 g/cc | |
Bulk Molding Compounds BMC 404 Thermoset Polyester, Low Shrink, High Strength, Electrical Grade BMC 404 is a high strength, low shrink, glass reinforced polyester molding compound that meets Ford Specification ESF-M3D121-A. BMC 404 has excellent electrical properties and creep resistance. It c.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | ASTM D792 |
Asahi Glass Fluon® AH-3000 LM-ETFE, Conductive Type, Fluororesin Fluon®LM-ETFE AH series is a fluoro-resin which have an adhesive properties, and is possible to adhere with other materials by melting down. It can be applied directly without privilege adhesive ag.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FE 5622Q Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FE 5622Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |
|||
Specific Gravity | 1.80 g/cc | 1.80 g/cc | |
3M Dyneon™ FC 2177D Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FC 2177D can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formu.. |