Polymer Property : Linear Mold Shrinkage, Transverse = 0.0080 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ASTM D955
NYCOA 5133 HS 33% Glass-Fiber Reinforced, Impact Modified, Heat Stabilized Nylon 66 Resin NYCOA 5133 HS is a 33% glass fiber reinforced, heat stabilized, impact modified, Nylon 66 suitable for injection molding. It offers excellent balance of mechanical, thermal and chemical properties; ..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ASTM D955
Covestro Texin® 5250 Thermoplastic Polyurethane, Polyether-based, Medical (discontinued **) This grade is in chemical compliance with 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber articles intended for repeated use) subject to the limitations of this regulation and any other r..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4
Celanese VECTRA A725 LCP, 25% Specialty (Unverified Data**) Conductive Vectra grade, smooth surface compared to A700. 25% filled grade.25% filled, conductive gradeA three-zone screw evenly divided into feed, compression, and metering zones is preferred. A h..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ASTM D955
LG Chemical LUPOY GP-1000 General Purpose Modified PC, Unreinforced Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ASTM D955
LG Chemical LUPOY HR-5006A Heat Resistant PC/ABS Alloy, Unreinforced, Weather Resistant Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in
Kuraray Genestarâ„¢ G1300H Nylon, 30% Glass Filled Standard HB grade. Halogen free, following the standards that Br is less than 900ppm, Cl is less than 900ppm, and total of halogen amount (Br and Cl) is less than 1500ppm. It is suitable for use in ..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4, 2577
Kuraray Genestarâ„¢ G1500A-M61 Nylon, 50% Glass Filled 50% Glass reinforced injection grade. Main Features:High strengthHeat resistanceExamples of applications:Structural partsSteel alternating parts
Linear Mold Shrinkage, Transverse	0.0080 cm/cm @Thickness 2.00 mm	0.0080 in/in @Thickness 0.0787 in	Vertical Direction; ASTM D955
Mitsui Arlenâ„¢ CH230N 30% Glass Fiber-Reinforced Modified Nylon 6T, Flame Retardant (COND) ARLENâ„¢ is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320Â°C) and a rigidity level comparable to super engineering plastics, it poss..
Linear Mold Shrinkage, Transverse	0.0080 - 0.012 cm/cm	0.0080 - 0.012 in/in
LATI Latamid 66 H2 G/50-GWHF1 PA 66, 50% Glass Fiber Reinforced, Heat Stabilized Polyamide 66 (PA66) based compound. Heat stabilized. Glass fibers. improved G.W.F.I. compared to standard product.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North Ameri..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in
Ineos ABS TriaxÂ® KU 2-3050 ABS + Polyamide Blend (DAM) Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightHeat stabilized or stable to heatSuitable processing methods:Injection molding
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ASTM D955
LG Chemical LUPOY GN-2006F Halogen Free Modified PC, Unreinforced, Weather Resistant, Flame Retardant, Green Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	48 hrs @ 23Â°C, xflow; SABIC Method
SABIC Innovative Plastics SABIC PPCOMPOUND G3240U PP SABICÂ® PPcompound G3240U is a general purpose, 40% glass filled, chemically coupled, heat stabilized and UV stabilized homopolymer polypropylene compound. The IMDS ID is 209768078.
Linear Mold Shrinkage, Transverse	0.0080 - 0.010 cm/cm @Time 86400 sec	0.0080 - 0.010 in/in @Time 24.0 hour	ASTM D955
SABIC Innovative Plastics LNP STAT-KON DX98477 PC LNP* STAT-KON* DX98477 is a compound based on Polycarbonate containing Proprietary Filler(s). Added feature of this grade is: Electrically Conductive.
Linear Mold Shrinkage, Transverse	0.0080 cm/cm @Time 86400 sec	0.0080 in/in @Time 24.0 hour	ISO 294
SABIC Innovative Plastics LNP VERTON RV00CESS PA6.6 (Europe-Africa-Middle East) LNP Verton* RV00CESS is a compound based on PA 66 resin containing Long Glass Fiber. Added features include: Easy Molding, Heat Stabilized.
Linear Mold Shrinkage, Transverse	0.0080 - 0.012 cm/cm	0.0080 - 0.012 in/in	Borealis Method
Borealis Xmod™ GB305HP High Performance 35% Glass Fiber Reinforced Xmod GB305HP is reinforced with 35% chemically coupled glass fibers and based on a specific Polymer matrix material that is bringing excellent mechanical properties (biaxial impact behavior) as well..
Linear Mold Shrinkage, Transverse	0.0080 - 0.011 cm/cm	0.0080 - 0.011 in/in	ISO DIS 294-4
Wellman Wellamid® GFT1699-WBK1 13% Glass Fiber Reinforced, Weatherable Black Nylon 66 Description: Glass Fiber Reinforced, Weatherable Black Nylon 66Information provided by Wellman.
Linear Mold Shrinkage, Transverse	0.0080 - 0.019 cm/cm	0.0080 - 0.019 in/in	Flame Bar; ASTM D955
DSM Biomedical PurSil® 35 Thermoplastic Silicone Polyether Polyurethane (TSPU) A novel copolymer that is strong yet flexible with proven biocompatibility and biostability Combining the benefits of both silicone elastomers and polyether urethanes, PurSil® TSPU has exceptional..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4, 2577
EMS-Grivory Grivory® BK-50 PA6-GB50 Information provided by EMS Grivory
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4, 2577
EMS-Grivory Grivory® L 20 nat PA12 Medium viscosity unmodified Polyamide 12Information provided by EMS Grivory
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in
E-Polymers TEKASTER® F615G55 55% Glass Fiber Reinforced High Modulus PET Polyester Resin: TEKASTER is thermoplastic polyester resins (PBT, PET) mostly injection molding. PBT has excellent mechanical properties and well balanced engineering plastics with an electrical pe..
Linear Mold Shrinkage, Transverse	0.0080 - 0.023 cm/cm	0.0080 - 0.023 in/in	Flame Bar; ASTM D955
DSM Biomedical PurSil® 20 Thermoplastic Silicone Polyether Polyurethane (TSPU) A novel copolymer that is strong yet flexible with proven biocompatibility and biostability Combining the benefits of both silicone elastomers and polyether urethanes, PurSil® TSPU has exceptional..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm @Thickness 4.00 mm	0.0080 in/in @Thickness 0.157 in
CP-Polymer-Technik Wellamid® 6000 GV 25 HWUVCP 25% Glass Fiber Nylon 6, UV Stabilized, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4 2577
DuPont Performance Polymers Hytrel® G4074 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D Standard Performance Polyester Elastomer with Heat Ageing ProtectionHytrel G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be process..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	48h at 80°C; ISO 294-4
DuPont Performance Polymers Hytrel® RS 40F5 NC010 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D Renewably Sourced Medium Viscosity Polyester Elastomer Information provided by DuPont Performance Polymers
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4
Akro-Plastic Akromid® T1 GF 40 9 (3499) PPA Conditioned, 40% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high..
Linear Mold Shrinkage, Transverse	0.0080 - 0.030 cm/cm @Time 86400 sec	0.0080 - 0.030 in/in @Time 24.0 hour
Arkema Group KYNAR® 370 Polyvinylidene Fluoride (PVDF) Homopolymer - Injection Molding Characteristics: Natural resin - translucent, off-white hemispheres. Low melt shrinkage, graphite powder filled. High stability in harsh thermal, chemical and ultraviolet environments. High toug..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4
Celanese Thermx® CG907 PCT, 30% Glass Reinforced Thermx« CG907 is a 30% glass fiber reinforced, flame retardant polycyclohexylenedimethylene terephthalate resin for injection molding.Information provided by Celanese Corporation.
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO Data
BASF Capron® 8334G Impact Modified, 40% Glass-Filled Nylon 6 (Dry) (discontinued **) Capron 8334G is a heat stabilized, 40% glass fiber reinforced polyamide 6 molding compound developed for applications requiring a high level of stiffness combined with excellent impact performance. ..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4 2577
DuPont Performance Polymers Rynite® FR515 NC010 Polyethylene Terephthalate (PET) (Unverified Data**) 15% Glass Reinforced Flame Retardant Polyethylene Terephthalate Rynite FR515 NC010 is a flame retardant 15% glass reinforced modified polyethylene terephthalate. Recognized by UL as UL94V-0 at 0.8mm..
Linear Mold Shrinkage, Transverse	0.0080 cm/cm @Thickness 2.00 mm	0.0080 in/in @Thickness 0.0787 in	DAM; ISO 294-4
DuPont Performance Polymers Zytel® HTN FR52G30BL BK337 Polyphthalamide (PPA) (Unverified Data**) Zytel® HTNFR52G30BL BK337 is a 30% glass reinforced, flame retardant, lubricated high performance polyamide resin that has been developed for connector applications.Information provided by DuPont P..