Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
NYCOA 2037 15% Glass Filled Nylon 6 15% glass filled very high viscosity nylon 6Information provided by NYCOA, Inc. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
Omni Plastics OmniTech™ PC GR30 Glass Reinforced Polycarbonate OmniTech™ is a family of non-standard products custom developed for applications with unique functional requirements, including but not limited to: Flame Retardant, Conductive, Wear Resistant, and .. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 50 mm/min; ASTM D638 |
Ovation Polymers Opnyl OP66GF13 Nylon 66, 13% Glass Reinforced Nylon 66 - Glass reinforced (13 %), high tensile strength, stiffness and HDT. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All samples are prepared.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
Oxford Polymers 901-BK Polycarbonate/Polyetherimide Alloy Polycarbonate/Polyetherimide AlloyInformation provided by Oxford Polymers. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM-D638 |
Polyram PE322G22 PET, 22% Glass Fiber
(discontinued **) 22% Glass fiber reinforced, flame retardant PET for injection molding applications.Information provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ISO 527 |
Victrex® HT™ P22 Polyetherketone Product Description: High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, coarse powder for extrusion compounding, easy flow, FDA food contact compliantInfo.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | Result based on similar products; ISO 527 |
Victrex® PEEK 150UF10 Polyetheretherketone Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for composite manufacture, easy flow, FDA food contact compliant.. |
|||
Tensile Strength, Yield | 100 - 175 MPa | 14500 - 25400 psi | Average value: 144 MPa Grade Count:4 |
Overview of materials for Liquid Crystal Polymer (LCP), 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Liquid Crystal Polymer (LCP), 30% Glass Fiber Filled". Specific grades with glass content between 25% an.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ISO-DIS 527 |
Schwartz Technical Plastics MITELA® HD8B Cotton Fabric, Special Quality Application: bearing shells and bearing collarsInformation provided by Schwartz Technical Plastics GmbH |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
Techmer ES Elastoblend® PA6 GF30 IM HS L 30% Glass Filled (Conditioned) Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: Impact Modifier Features: Impact ModifiedProcessing Method: Injection MoldingI.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM CRS5011R PEI Enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Valox® 815 PBT (Europe-Africa-Middle East) VALOX 815 is a 15% glass reinforced PBT+PET blend with excellent surface finish. Applications: hot air gun housings assemblies, industrial glue guns, appliance housings and handles. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics Valox® DR48 PBT (Europe-Africa-Middle East) VALOX DR48 is a 17% glass reinforced, flame retardant injection moulding PBT resin. Applications: lamp sockets, connectors, switches, electrical housings and bases, bobbins, trimmers and electromoto.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
Techmer ES Luriblend® PA4/6 HS L BK Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedUL File Number: E157318Appearance: BlackInformation provided by TP Composites.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM D638 |
Techmer ES Plastiblend® TPX-HTN-000BB Availability: North AmericaForms: Pellets Features: High Heat ResistanceInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL GTX GTX820 PPE+PA (Europe-Africa-Middle East) NORYL GTX820 is a 20% glass reinforced grade with excellent chemical resistance in combination with high stiffness and heat resistance. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | Type I, 5 mm/min; ASTM D 638 |
SABIC Innovative Plastics Noryl GTX GTX8710 PPE+PA Noryl GTX8710 resin is a glass filled, high performance blend of PPE/PA that exhibits an exceptional balance of high-heat resistance, strength, flow, and conductivity. This grade can be electro-sta.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Ultem ATX102R PEI+PCE (Asia Pacific) 20% Glass fiber filled, high flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Tensile Strength, Yield | >= 100 MPa | >= 14500 psi | ISO 527 |
Polyram PlusTek RA303G3 Nylon 66 for Injection Molding, 15% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant 15% Glass fiber reinforced, heat stabilized and hydrolysis resistant Nylon 66 for injection molding applications.Information provided by Polyram. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM-D638 |
Polyram Polytron P40B03 Copolymer Polypropylene, Chemically Coupled 40% Long Glass Fiber A CHEMICALLY COUPLED 40% LONG GLASS FIBERS REINFORCED BLACK POLYPROPYLENE, HEAT STABILIZED FOR INJECTION MOLDING APPLICATION.These products have significantly improved impact performance characteris.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ISO 527-2 |
Tisan TISLAMID® 6 30% Glass Filled Impact Modified Nylon 6 TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | D638 |
Zhejiang Juner 201-G20 20% Glass Fibre Reinforced Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, .. |
|||
Tensile Strength, Yield | >= 100 MPa | >= 14500 psi | ASTM-D638 |
Polyram PlusTek RA300G3 Nylon 6.6, 15% Glass Fiber 15% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM-D638 |
Polyram Polytron P30N01 Homopolymer Polypropylene, Chemically Coupled 30% Long Fiber A CHEMICALLY COUPLED 30% LONG FIBER GLASS REINFORCED NATURAL POLYPROPYLENE HEAT STABILIZED FOR INJECTION MOLDING APPLICATION.Information provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ISO 527-1/-2 |
DSM Stanyl® TW441 (DAM) Nylon 46 High Viscosity, Heat Stabilized, Lubricated (North America) Information provided by DSM Engineering Plastics. |
|||
Tensile Strength, Yield | >= 100 MPa @Strain 0.200 % |
>= 14500 psi @Strain 0.200 % |
|
CLAL-MSX NICLAL 3444 0 Annealed Copper Alloy, Free Cutting Bronze Main Characteristics: Excellent machineabilityHigh mechanical propertiesSelf lubricating alloyTypical Applications:Parts for connectorsFriction partsBearings-Pinions-Lock pinsInformation provided b.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® FRee A3U40G5 25% Glass Filled PA66 FR (Dry) Description: Flame retardant without halogens and red phosphorus, 25% glass fiber reinforced injection-molding grade; light colorable; outstanding mechanical and electrical properties.Information pr.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 50 mm/min; ISO 527-2 |
BASF Ultradur® B 4300 G3 High Speed 15% Glass Filled PBT Description: Is a PBT, easy-flowing injection-molding grades with 15% glass fibers; for rigid, tough and dimensionally stable technical parts.Applications: Housings, consoles, contact carriers, cove.. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL GFN1520V PPE+HIPS (Asia Pacific) NORYL GFN1520V is a 20% glass fibre reinforced material with improved hydrolytic stability. This grade has been certified for potable water applications up to 85C in Europe and North America, color .. |
|||
Tensile Strength, Yield | 100 MPa | 14500 psi | ASTM-D638 |
Polyram Polytron P30B11 Homopolymer Polypropylene, Chemically Coupled 30% LGF A chemically coupled 30% LGF reinforced black PP, heat stabilized for injection molding applications.Information provided by Polyram Ram On Ind. |