Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527 |
Mytex Polymers AN18KW-01 FK Polypropylene, Rubber modified Description: Rubber modified polypropylene produced for automotive interior applications using Mytex® Technology. Specifically designed to achieve ductile performance at cold temperatures during a.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering B60B Styrene Butadiene Rubber Styrene-Butadiene Rubber (SBR) 55-65 °IRHD. Copolymer of styrene and butadiene.Applications: Good sealing resistance to brake fluids and water. Poor against petroleum oils, solvents and weather. .. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering N80X Nitrile Rubber Self-lubricating, Nitrile Rubber, 75-85 °IRHD. Copolymer of acrylonitrile and butadiene. Special filler incorporated to enhance operation in dynamic sealing applications. ASTM & ISO designation = N.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70R Polyurethane Rubber Peroxide cured, red Polyurethane Rubber, 65-75 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG714, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion r.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70W Polyurethane Rubber Peroxide cured, off-white Polyurethane Rubber, 65-75 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG714, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abra.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q70X Polyurethane Rubber Peroxide cured, self-lubricating, Polyurethane Rubber, 65-75 °IRHD. Compounded with graphite or molyb-d. To meet ASTM line call-out M5BG714, B14, EO14, EO34. Polyester-based urethane. ASTM & ISO d.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering Q80Y Polyurethane Rubber Peroxide cured, yellow Polyurethane Rubber, 75-85 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG814, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasio.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D412 |
Precision Polymer Engineering V75F Fluoroelastomer Compound Special steam resistant, Fluoroelastomer Rubber, 70-80 °IRHD. Tetrapolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene and cure site monomer (CSM). To meet ASTM D2000 line.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 9022 MDPE - Overwrap Packaging The Trithene TS 9022 resin is a medium-density polyethylene (MDPE) with good optical properties, excellent stiffness and processability, that warrants the production of thin films with good appearan.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ASTM D638 |
NOVA Chemicals Sclair® 2315 LLDPE Injection Molding Resin
(discontinued **) Features: Low odor, low warpage, fast cycling, high surface gloss, permits light weight lid design, low temperature impact excellent.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 14.0 - 20.0 MPa | 2030 - 2900 psi | Average value: 16.6 MPa Grade Count:5 |
Overview of materials for Polytetrafluoroethylene (PTFE), Bronze Filled This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Bronze Filled". Each property range of values reported is minimum and ma.. |
|||
Tensile Strength, Yield | >= 14.0 MPa | >= 2030 psi | |
Kazanorgsintez 298-285 High Density Polyethylene Composite Production Method: Compositions are achieved by ethylene copolymerization by gaseous-phase method at low pressure using complex catalysts on carrier material. Application: HDPE compositions 296-.. |
|||
Tensile Strength, Yield | 14.0 MPa @Strain 0.200 %, Temperature 1150 °C |
2030 psi @Strain 0.200 %, Temperature 2100 °F |
|
Haynes 214® alloy, hot rolled solution annealed plate 12.7 mm (1/2 in.) thick Intended principally for use at temperatures of 955°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh .. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
LG Chemical LUPOL TE-5005H Thermoplastic Elastomer Alloy, Dimensional Stability LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive exterior parts.Information Provided by LG Chem |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO R527-1 |
LyondellBasell Hifaxâ„¢ CJ232 Thermoplastic Olefin Resin Key Features: medium high melt flow, medium modulus, low CLTE, paintable thermoplastic elastomeric olefin resin, excellent impact and stiffness balance, good dimensional stability, paintableApplicat.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP YP003 POLYESTER ELASTOMER LNP LUBRICOMP* YP003 is a compound based on Polyester Elastomer resin containing 15% PTFE/Silicone. Added features of this material include: Wear Resistant. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa @Thickness 2.00 mm |
2030 - 5080 psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Features: Copolymer; Good Flexibility; Low ViscosityUses: Wire & Cable ApplicationsAdditional .. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP 2X00858 FP-F (FEP) LNP* THERMOCOMP* 2X00858 is a compound based on FEP resin containing proprietary fillers. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Thermocomp MH0255A PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MH0255A is a compound based on Polypropylene resin containing Proprietary Filler(s). Added features include; High Specific Gravity.This data was supplied by SABIC-IP for the Europe-.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | 50 mm/min; ISO 527-2 |
Borealis Bormed™ LE6609-PH LDPE for Pharmaceutical Blow Molding Bormed LE6609-PH is a LD-polyethylene produced in a high-pressure process intended for blow molding of soft and flexible packages for pharmaceutical products.Bormed LE6609-PH can be used in "blow-fi.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Trelleborg Horda Cable E8409 Easy Strippable Semiconductive Shielding E8409 is a vulcanizable, strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes.E8409 meets the requirements as be.. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Aclo Accucomp Polyethylene LD0102L Low Density |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0437W40L Wollastonite Reinforced |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
Azoty Tarnow™ TARFLEN SM-K25 PTFE Based on Tarflen SM1 reinforced with 25% coke for standard compression molding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
Tensile Strength, Yield | 14.0 MPa | 2030 psi | ISO 527 |
Breplast Bretene PP Polypropylene Composite Recovered polypropylene compositeInformation provided by Breplast S.p.A. |
|||
Tensile Strength, Yield | 14.0 - 35.0 MPa @Thickness 2.00 mm, Temperature 23.0 °C |
2030 - 5080 psi @Thickness 0.0787 in, Temperature 73.4 °F |
Type IV, 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 31508 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 31508 PVDF copolymer is a low viscosity and very flexible grade for Wire & Cable applications.Information provided by Solvay Specialty Polymers. |
|||
Tensile Strength, Yield | 14.0 - 21.0 MPa | 2030 - 3050 psi | ASTM D638 |
Arkema Group KYNAR FLEX® 2750-01 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Very flexible, lubricated. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |