Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | >= 18.0 MPa | >= 2610 psi | ISO/R 527 |
Okulen® 2000 PE-UHMW, GB OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
Tensile Strength, Yield | >= 18.0 MPa | >= 2610 psi | ISO/R 527 |
Okulen® 2000 PE-UHMW, GB OKULEN® 2000 is an ultra high molecular low pressure polythylene with a molecular weight of > 7.000.000 g/mol plus additives for the improvement of specific material properties. It has an antistati.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527 |
Polimeri Europa Clearflex® RM 50 U Linear Medium Density Polyethylene Clearflex RM 50 U is a linear medium density polyethylene resin, with antioxidants and UV stabilizers, suitable for rotomolding applications.Items manufactured with Clearflex RM 50 U show good mecha.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 2.0 in/min; 0.050" thickness; ASTM D-638 |
Chevron Phillips EC6755 HIPS - High Impact Polystyrene
(discontinued **) Rubber modified high impact polystyrene.Applications:Containers and lidsPackaging for foods such as yot, sour cream, delicatessen salads and gravyCold temperature packagingPortion dairy containersFe.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
NOVA Chemicals Sclair® 8405 BK, 8405GBK MDPE Rotational Molding Resin
(discontinued **) Features: Good ESCR, high impact strength.Applications: Spray tanks.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 50 mm/min; ASTM D638 |
ICO Polymers ICORENEâ„¢ 110-3561 LMDPE Rotational Molding Resin Description: ICORENE 110-3561 is a linear medium density polyethylene developed for use in rotational molding. This is a very fast processing material that quickly molds out to offer low surface po.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638-02 |
Ipiranga Petrochem MB 0310 MDPE IPQ employs Spherilene technology from Basell in the production of MDPE. The raw materials, which are supplied by COPESUL, are pre-treated and fed into gas-phase reactors, where medium density polye.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527 |
MRC Polymers MAXTELâ„¢ 600T30IM TPO, 30% Talc Filled For automotive exterior applicationsExcellent process ability and dimensional stabilityImpact ModifiedCan be UV StabilizedInternal and external lubricants can be addedInformation provided by MRC Pol.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
LG Chemical LUPOL TE-5006K Thermoplastic Elastomer Alloy, Weather Resistant LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive exterior parts.Information Provided by LG Chem |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics SABIC PPCOMPOUND 5521 PP SABIC® PPcompound 5521 is a mineral filled, impact modified polypropylene TPO. This material combines good flow with exterior automotive weathering stability. The general purpose black color prod.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | BP 13B/1 |
SIDPEC EGYPTENE® HD 3840 EA MDPE Wire and Cable Grade Applications:Suitable for the production of silane cross-linkable compoundsLow voltage power cable insulationInjection molded technical parts and closureInformation provided by Interchim s.r.l., off.. |
|||
Tensile Strength, Yield | 18.0 MPa @Temperature 80.0 °C |
2610 psi @Temperature 176 °F |
ISO Data |
Styrolution Luran® S 776 SE ASA Luran S 776 SE is a general purpose extrusion ASA grade with good toughness and strength, used for sheet and profile extrusions.Information provided by STYROLUTION, which is a joint venture between .. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP TH0300B PU LNP* Thermocomp* Th0300B is a compound based on Polyurethane containing proprietary fillers. Characteristics of this grade are High Specific Gravity. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP TH0300B PU LNP* Thermocomp* Th0300B is a compound based on Polyurethane containing proprietary fillers. Characteristics of this grade are High Specific Gravity. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP MH0500C PP LNP* THERMOCOMP* MH0500C is a compound based on Polypropylene resin. Added feature of this material is: High Specific Gravity. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
SCG Chemicals EL-Leneâ„¢ M3504DXP Octene (C8) Rotational Molding Resin Natural base resin available in powder formKey Characteristics:Excellent ESCRExcellent impact resistanceLow warpageFair processingTypical Applications: Chemical storage tanks, diesel tanks, spray t.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | At 50 mm/min; ISO 527-2 |
Borealis Borcoat™ BB125E Polypropylene Adhesive for Steel Pipe Coating Borcoat BB125E is a chemically modified polypropylene copolymer designed to be used as the tie layer between the epoxy corrosion protection layer and the top-coat polypropylene Borcoat BB108E-1199.B.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | At 50 mm/min; ASTM D6883 IV |
Borealis Borecene™ RM8343PL Linear Polyethylene for Rotational Molding Borecene RM8343PL is plasma treated linear medium density natural polyethylene for rotational molding with improved adhesion properties. The material is plasma treated to change the chemical struct.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527 |
Total 3802 B HDPE, cable, sheet, pipe, injection molding FINATHENE® 3802 B is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® 3802 B is a black polyethylene.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527-2 |
Total Lumicene® mPE M 3581 UV Metallocene Polyethylene, Rotomolding Lumicene® mPE M 3581 UV is a second generation metallocene medium density polyethylene with hexene as comonomer.Lumicene® mPE M 3581 UV is intended for the manufacture of rotomolded items.Its spec.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SIH 6007A Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Good Stiffness Uses: Wire and Cable Applications Wire Types: V-90 Agency Ratings: AS 3147-1992 Forms: Pellets Processing Method: ExtrusionInformation Provided by.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 50mm/min; ISO 527-2 |
Borealis Daplen™ EF261AI Polypropylene TPO Compound Daplen™ EF261AI is a 20 % mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process... |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527 |
Total 3802 YCF MDPE pipe grade FINATHENE® 3802 Y CF is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Y CF is a yellow cadmi.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | |
Covestro Bayflex® 110-50 Polyurethane Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ISO 527-2/50 |
ExxonMobil Exxtral™ BNT 013 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin designed for injection molded automotive interior applications such as door panels.Availability: Africa & Middle East, Asia Pacific, E.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 50 mm/min; ASTM D638 |
Carmel Olefins CAPILENE® TT 75 AV Polypropylene Impact Copolymer Description: CAPILENE® TT 75 AV is a nucleated, controlled rheology heterophasic copolymer designed for injection molding. It is characterized by excellent impact strength, even at low temperatur.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
Braskem CP 191 Injection Molding Polypropylene Applications: Household; low temperature packing; frozen desserts packaging. Information provided by Braskem |
|||
Tensile Strength, Yield | 18.0 - 27.0 MPa | 2610 - 3920 psi | Spec; ISO 527-1/2 |
Axion Polymers Axpoly® PS13 1011 High Impact Polystyrene PS13 Series polystyrenes offers the designer and processor a high performance polymer with well-defined properties in a range of options to suit many applications.The Axpoly® PS13 range of resin co.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | 150x10x4 mm specimen, 50 mm/min; ISO 527-1/527-2 |
Solvay Engineered Polymers DEXFLEX® 980HF TPO
(discontinued **) Description: DEXFLEX® 980HF is a thermoplastic olefinic elastomer (TPO) designed for large automotive exterior applications that require high flow for excellent processability, ductile impact prope.. |
|||
Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM-D638 |
Polyram RamOfin PPC300S4BK10 Polypropylene, 20% Glass beads 20% glass beads reinforced polypropylene copolymer for injection molding applicationsInformation provided by Polyram Ram On Ind. |