Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527-1/-2 |
Murtfeldt Murinyl® Polyvinylidinefluoride As a fluorinated plastic, Murinyl® is exceptionally resistant to chemicals, hydrolysis, and sterilization. Its properties change very little at high service temperatures and after long-term exposur.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Cycoloy® CE8510 PC+ABS (Asia Pacific) Extrusion grade PC/ABS. Low viscosity, high impact and ductility.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | Type I, 5 mm/min; ASTM D 638 |
SABIC Innovative Plastics Geloy EXGY30CP ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527-1,2 |
Qualchem Danamid AFES-21 Polyamide 66 Impact resistant, dryInformation provided by Qualchem Zrt. |
|||
Tensile Strength, Yield | 50.0 - 90.0 MPa | 7250 - 13100 psi | Injection; ISO 527 |
Raschig Group MELOPLAS® 152 MF Cellulose-reinforced MF molding compound in white and colored shades. Very good electrical properties, high surface hardness, good abrasion- and UV-stability, very good resistance to chemicals - al.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Geloy FXTW30CP ASA Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | cond.; ISO 527-1, -2; 50 mm/min |
Lanxess Durethan® A 30 S FN31 000000 Nylon 66, Flame Retardant PA 66, non-reinforced, injection molding, halogen-free flame retardant, improved flowabilityInformation provided by LANXESS. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO-DIS 527 |
Schwartz Technical Plastics LAMINEX® 2000 Cotton Fabric, Phenolic Resin Impregnated, Coarse Application: rollneck-bearings, coverts for friction rollsInformation provided by Schwartz Technical Plastics GmbH |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics Xenoy® X2420 PC+POLYESTER (Asia Pacific) Xenoy*X2420 is a 10% glass filled, high flow, impact modified, injection moldable grade designed for high flow and impact strength. X2420 has enhanced melt flowability, impact ductility and broad co.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Xenoy® X3108UV PBT+PC (Europe-Africa-Middle East) Unreinforced, UV-stabilized, flame retardant, impact modified PBT+PC with V0 at 0.8mm thickness. For interior and exterior applications like wall switches and electrical enclosures.This data was sup.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527 |
Styrolution Novodur® M205FC ABS Novodur HD M205FC is an injection molding grade especially suitable for medical applications providing enhanced stiffness.Information provided by Styrolution |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527 |
Styrolution Terblend® S NM-31 ASA / PA Terblend® S is a UV-stabilized ASA/PA blend with high impact strength, easy flow and pronounced color fastness. It is especially suitable for unpainted highly UV-exposed automotive interior parts.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL GTX GTX974 PPE+PA NORYL GTX974 is a material especially designed for in- or on-line painted bodypanels and fenders in particular. This material combines impact performance with conductivity for electro-static paintin.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Noryl GTX GTX976 PPE+PA (Europe-Africa-Middle East) NORYL GTX976 is a material especially designed for electrostatic painting and powder coating applications. This material combines high impact performance with conductivity in an unique way.This data.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527 |
Styrolution Terblend® N 3158 ASA / PA, 9% Mineral filled Terblend® N 3158 is an 9% mineral-filled ABS/PA blend with good dimensional stability, enhanced rigidity and excellent heat resistance, so that this grade can be applied for online-painting.High .. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ASTM D638 |
Eastman Drystar 0601 Copolyester, Injection Molded This product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellen.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527 |
Eastman Drystar 0601 Copolyester, Injection Molded This product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman’s copolyesters are highly valued for their excellen.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ASTM D638 |
Eastman Eastman 1223 Copolyester Applications:Blown filmCredit cardsDebit cardsDeodorant packagingElectronic packagingFabricated boxesFlexible packagingFood packagingFurniture/Furniture trimGaming cardsGift cardsIdentification card.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | parallel; ISO 527-3 |
Covestro Desmopan® DP 8795A S043 Polyurethane PreprocessingMax. Water content |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® 2S 20 nat PA610 Product Description: Grilamid 2S 20 natural is an unmodified medium viscosity polyamide 610 (PA610), designed for injection molding as well as extrusion. It is characterized by the following product.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527 |
CP-Polymer-Technik Wellamid® 6000 S Nylon 6, Finely Crystalline, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | chs 2 in/min; ASTM D638 |
Diamond Polymers ABS 3501 Natural 1000 P Description: Extrusion Grade, High ImpactInformation provided by Diamond Polymers, Inc. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527 |
Clariant Renol PA1SP0003 Nylon 66, PE Modified Reduced Coefficient of FrictionData provided by Clariant Masterbatches |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | |
Covestro Bayblend® T 65 Polycarbonate/ABS Blend High impact and notched impact strength, little risk of brittle fracture, high dimensional accuracy.Applications: Interior automotive components.Information provided by Bayer.As of 1 September 2015,.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® L 25 LM PA12 Product Description: Grilamid L 25 LM is a heat and UV stabilized nylon 12 grade for tube extrusion. According to DIN 73378 Grilamid L 25 LM corresponds to the type PA 12 HL. Grilamid L 25 LM fulfil.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® TR 90 NZZ nat PAMACM12-I Product description: Grilamid TR 90 NZZ natural is an amorphousthermoplastic polyamide, based on aliphatic and cycloaliphatic units. Grilamid TR 90 NZZ natural offers a variety of interesting proper.. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ASTM D638, ISO R527 |
EPICHEM Epicarb PC Polycarbonate Characteristics: high fluidity, good impact |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527-1 |
Barlog Plastics KEBALLOY EP 23 ABS/PC, unreinforced, electro platable grade ABS+PCInformation provided by BARLOG plastics GmbH. |
|||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® 41H Nylon 66, Impact Modified, DAM Vydyne® 41H is a general-purpose, impact-modified PA66 resin. Available in natural, it is heat-stabilized for improved resistance to elevated temperatures. The heat stabilization package for Vydyne.. |