Polymer Property : Tensile Strength, Ultimate = 13.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	13.0 MPa	1890 psi
3M Dyneon™ Fluorel™ FC-2177 Fluoroelastomer VF2 + HFP Dipolymer (discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Slower cure rate and high tear streng..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
3M Dyneon™ Aflas® FA-150E PTFE Fluoroelastomer (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 57%F in polymer with 19% Medium Thermal Carbon Black (N990), 4% Triallyl Isocyanurate (TAIC), 1% Percadox™ 14, 1% Sodium..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
3M Dyneon™ Fluorel™ FC-2261Q Fluoroelastomer VF2 + HFP Dipolymer (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phosp..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
3M Dyneon™ Fluorel™ FT-2430 Fluoroelastomer VF2 + HFP + TFE Terpolymer (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 69%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phospho..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM Data
Americas Styrenics Styron® 6187SF High Impact Polystyrene (discontinued **) STYRON® 6187SF structural foam molding resin is a high impact polystyrene grade with proprietary ignition resistance additive package to achieve UL 94 V-0 rating. It offers excellent moldability an..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman Rexell® H2109 Injection Molding LLDPE (discontinued **) Linear-low high density injection molding.Features: High flow, good ESCR.Applications: General purpose molding, housewares.Information provided by Huntsman Corporation
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE7076 Profile Extrusion Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Yields parts with high gloss and excellent stiffness.Applications: Extrusion: profile extrusion.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 u..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE1155 EVA Film Extrusion (discontinued **) 1.5% Vinyl Acetate EVA Copolymer and FDA compliant.Features: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications:..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Global V-1160 High Density Polyethylene, Injection Molding Grade (discontinued **) Description-opacity, medium high stiffness, good impact strength, good chemical resistanceApplications- auto parts, bottles, housewares, drums, containers, bottlesMeets FDA requirements as listed in..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE1507 EVA Film Extrusion (discontinued **) 5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE1605 EVA Film Extrusion (discontinued **) 6% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi..
Tensile Strength, Ultimate	13.0 - 36.0 MPa	1890 - 5220 psi	Average value: 26.0 MPa Grade Count:91
Overview of materials for Polypropylene with 30% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Talc Filler". Specific grades with primary filler content between 25% and 34% are..
Tensile Strength, Ultimate	13.0 - 333 MPa	1890 - 48300 psi	Average value: 34.2 MPa Grade Count:53
Overview of materials for Polytetrafluoroethylene (PTFE), Molded This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Molded". Each property range of values reported is minimum and maximum v..
Tensile Strength, Ultimate	13.0 MPa @Thickness 2.00 mm	1890 psi @Thickness 0.0787 in	ASTM D4894
3M Dyneon™ TFM™ 4215 Modified PTFE, 25% Electrocarbon Filled (discontinued **) Applications include bearings, seals/gaskets, packings, piston rings.Data provided by Dyneon.
Tensile Strength, Ultimate	13.0 MPa	1890 psi
Freudenberg Simrit V174 Fluoroelastomer Self-Lube Additives to elastomer compounds can improve the lubricity or non-stick performance of a seal. Specific compound ingredients may include fluoropolymer (TEFLON) additives, silicone additives or molyb..
Tensile Strength, Ultimate	13.0 MPa @Temperature 22.0 Â°C	1890 psi @Temperature 71.6 Â°F	25mm flat samples, compression moulded; ISO 527-4
Menzolit MenzolitÂ® SMC 0520 Unsaturated Polyester UP SMC 0520 is a special SMC with significantly reduced density. The glass level has been selected to combine good moulding with sufficient strength and stiffness properties. Even without a specific fi..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
Kuraray HYBRARÂ® HD1 Thermoplastic Rubber-HDPE Blend Description: HYBRARÂ® is another in the series of new high performance thermoplastic rubbers developed by KURARAY using their unique isoprene technology. HYBRARÂ® is a special thermoplastic rubb..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
Momentive Performance Materials TSE399 Translucent Adhesive Sealant, Flowable One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive adhes..
Tensile Strength, Ultimate	13.0 MPa @Temperature 49.0 °C	1890 psi @Temperature 120 °F	Type IV, crosshead speed 2 in/min; ASTM D638
DuPont Elvax® 670 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	Heat aged 2 weeks at 175°C
DuPont Vamac® DP HVA-2 Coagent Test Compound Vamac® DP is an ethylene acrylic dipolymer elastomer. Its general performance characteristics are similar to those of the Vamac® terpolymers, including:Good oil and chemical resistanceHigh temper..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ISO 527-1
Dow BETAMATE™ XW 1185 Epoxy BETAMATE™ XW 1185 is a one component heat curing Epoxy paste adhesive. The material is readily pumped at ambient temperatures. It shows excellent adhesion to automotive steel and aluminum, is resi..
Tensile Strength, Ultimate	13.0 - 16.0 MPa @Temperature 120 °C	1890 - 2320 psi @Temperature 248 °F	ASTM D638
Arkema Group VOLTALEF® 300 HD PCTFE VOLTALEF® 300 HD is a chlorotrifluoroethylene powder. Used for compression molding, very good flow, non-flammable. Information provided by Arkema Group
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE6014 Blow Molding Polyethylene (discontinued **) Homopolymer, Drug Master File listed product, complies with USP Classification VI, and FDA compliant.Features: Meets exacting requirements of blow molded containers and processes well with parison s..
Tensile Strength, Ultimate	13.0 MPa	1890 psi	ASTM D638
Huntsman PE6076 Blow Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Yields bottles with good clarity and excellent stiffness.Applications: Blow molding.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under conditi..
Tensile Strength, Ultimate	13.0 - 105 MPa	1890 - 15200 psi	Average value: 28.7 MPa Grade Count:73
Overview of materials for Polypropylene with 10% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 10% Talc Filler". Specific grades with primary filler content between 5% and 14% are ..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
3M Dyneon™ Fluorel™ FC-2211 Fluoroelastomer VF2 + HFP Dipolymer (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phosp..
Tensile Strength, Ultimate	13.0 MPa	1890 psi
Von Roll Isola IMI Irrathene® 201 Irradiated Polyethylene Film Data provided by Von Roll Isola USA.Produced by electron bombardment of specially formulated polyethylene film used in a wide variety of electrical applications. Irrathene film is nonmelting and hi..
Tensile Strength, Ultimate	13.0 - 35.0 MPa	1890 - 5080 psi	Average value: 23.9 MPa Grade Count:12
Overview of materials for Polypropylene with 10% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 10% Mica Filler". Specific grades with primary filler content between 5% and 14% are ..