Polymer Property : Tensile Strength, Ultimate = 9.00 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D412
Multibase Multi-Flex® TPE A 8102 BLK Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Tensile Strength, Ultimate	9.00 - 13.0 MPa	1310 - 1890 psi	ASTM D412
Multibase Multi-Flex® TPE A 8502 BLK The fogging test value is 90% according to ASTM SAE-J275. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D412
Multibase Multi-Flex® TPE A 8802 BLK Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Tensile Strength, Ultimate	>= 9.00 MPa	>= 1310 psi	ASTM D412
Multibase Multi-Flex® TPE G 7455 S BLK The burn rate is 0 in/min (0 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638-95
Multibase Multi-Flex® TPO D-6509 Multi-Flex® A-6509 thermoplastic elastomer blend is designed to provide processors with cost effective compounds with excellent tear strength, tensile strength and high elongation. Multi-Flex® A-..
Tensile Strength, Ultimate	9.00 MPa	1310 psi
Reliance Industries METABOLIX PHO Information provided by Reliance Industries
Tensile Strength, Ultimate	9.00 MPa	1310 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 1390P Polyethylene (discontinued **) Low-density polyethylene 1390P is used primarily in extrusion-coating applications that require fast line speeds and relatively low coating weights. When compared with other low-density polyethylen..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman 811A Polyethylene (discontinued **) Injection grade. With its high melt index, the material flows well in molding machines and fills large molds with ease. It is used for molding housewares and other items where a flexible, easy mol..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	500 mm/min (20 in./min.); Type IV Specimen; ASTM D638
Eastman 811P Polyethylene (discontinued **) Injection grade. With its high melt index, the material flows well in molding machines and fills large molds with ease. It is used for molding housewares and other items where a flexible, easy mol..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
ExxonMobil Escorene® LD-402 LDPE Electrical Jacketing Resin (discontinued **) Data provided by the manufacturer, Exxon Chemical.A low density polyethylene homopolymer resin designed for high speed extrusions.
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE5082 Extrusion Coating Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down, low neck-in, and excellent adhesion.Applications: Extrusion: coating grade and thin coatings (sugar paper and laminations).FDA Notes: Con..
Tensile Strength, Ultimate	9.00 - 80.0 MPa	1310 - 11600 psi	Average value: 30.1 MPa Grade Count:177
Overview of materials for Polypropylene, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Molded". Each property range of values reported is minimum and maximum values of appropri..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D412
DuPont Performance Polymers Kalrez® 1058 FFKM Perfluoroelastomer (discontinued **) A carbon black-filled compound that has been plasticized with perfluorinated oil. It is the softest, lowest modulus compound in the Kalrez line. Generally it is similar in resistance to Compound 1..
Tensile Strength, Ultimate	9.00 MPa @Temperature 49.0 °C	1310 psi @Temperature 120 °F	Type IV, crosshead speed 2 in/min; ASTM D638
DuPont Elvax® 750 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..
Tensile Strength, Ultimate	9.00 - 18.0 MPa	1310 - 2610 psi
ATG s.r.l. EACM Ethylene-Acrylic Rubber
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE2035 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Medium flow resin with good stiffness.Applications: Injection molding: color concentrates.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under c..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE2051 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Very good molding processability, produces parts with good stiffness, and shows excellent flatness in large projected areas. Also recommended for multi-cavit..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE2060 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics, good processability.Applications: Injection molding: general purpose molding, large moldings including housewares and toys.FDA Note..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE2072 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Very high flow rapid set-up characteristics, excellent clarity, gloss, and stiffness.Applications: Injection molding: lids and difficult to fill applications...
Tensile Strength, Ultimate	9.00 MPa	1310 psi	ASTM D638
Huntsman PE2075 Injection Molding Polyethylene (discontinued **) Homopolymer and FDA compliant.Features: Very high flow rapid set-up characteristics, excellent clarity, and gloss.Applications: Injection molding: lids and difficult to fill applications.FDA Notes: ..
Tensile Strength, Ultimate	9.00 - 15.0 MPa	1310 - 2180 psi	Average value: 12.3 MPa Grade Count:3
Overview of materials for Very Low Density Polyethylene (VLDPE) This property data is a summary of similar materials in the MatWeb database for the category "Very Low Density Polyethylene (VLDPE)". Each property range of values reported is minimum and maximum va..
Tensile Strength, Ultimate	9.00 - 62.0 MPa	1310 - 8990 psi	Average value: 41.4 MPa Grade Count:56
Overview of materials for Polyether Block Amide (PEBA) This property data is a summary of similar materials in the MatWeb database for the category "Polyether Block Amide (PEBA)". Each property range of values reported is minimum and maximum values of a..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman D4041-P Polyethylene (discontinued **) Low-density polyethylene D4041-P is a recommended for use in the boardstock coating industry for applications such as breadboard, cupstock, and liquid packaging board. This resin has low neck-in an..
Tensile Strength, Ultimate	9.00 MPa	1310 psi	Type IV, crosshead speed 2 in/min; ASTM D638
DuPont Elvax® 250 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..
Tensile Strength, Ultimate	9.00 - 60.0 MPa @Temperature 60.0 - 120 °C	1310 - 8700 psi @Temperature 140 - 248 °F	Average value: 36.3 MPa Grade Count:4
Overview of materials for Polypropylene with 20% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Glass Fiber Filler". Specific grades with glass content between 15% and 24% are i..
Tensile Strength, Ultimate	9.00 - 140.653 MPa @Temperature -40.0 - 120 °C	1310 - 20400.0 psi @Temperature -40.0 - 248 °F	Average value: 58.0 MPa Grade Count:30
Overview of materials for Polypropylene with 30% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Glass Fiber Filler". Specific grades with glass content between 25% and 34% are i..
Tensile Strength, Ultimate	9.00 - 80.0 MPa @Temperature 60.0 - 120 °C	1310 - 11600 psi @Temperature 140 - 248 °F	Average value: 31.0 MPa Grade Count:2
Overview of materials for Polypropylene, Glass/Mineral Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Glass/Mineral Reinforced". Each property range of values reported is minimum and maximum ..
Tensile Strength, Ultimate	9.00 - 15.0 MPa @Temperature 60.0 - 90.0 °C	1310 - 2180 psi @Temperature 140 - 194 °F	Average value: 12.0 MPa Grade Count:1
Overview of materials for Polypropylene Copolymer This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene Copolymer". Each property range of values reported is minimum and maximum values of approp..