Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL 1401 Conductive Elastomer High performance for non-corrosive environments; soft(45 Shore A) for low closure force where gasket geometry cannot be exploited; low tear strength; no fluid resistance. Molded and ExtrudedRoHS Com.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | |
Parker Chomerics CHO-SEAL 1501 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | ASTM D624 |
Parker Chomerics Tecknit Consil®-E 815 Extruded Silver-Filled Silicone Elastomer Description: CONSIL-E is a continuously extruded silicone elastomer filled with silver-plated inert particles. It is a medium hardness material providing high electrical conductivity and moisture se.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Split; ASTM D624 |
Northstar Polymers MPP-A30A Polyether Prepolymer This room-temperature-curable polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this s.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Split; ASTM D624 |
Northstar Polymers MPG-A25A Room-Temperature Curable Liquid Castable Polyurethane MPG-A25A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | Die B |
Momentive Performance Materials RTV11 White General Purpose Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Die C; ASTM D624 |
Monmouth Rubber & Plastics Durafoamâ„¢ C42 Closed Cell Epichlorohydrin Information provided by Monmouth Rubber & Plastics Corp. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Die C; ASTM D624 |
Monmouth Rubber & Plastics Durafoamâ„¢ C43 Closed Cell Epichlorohydrin Information provided by Monmouth Rubber & Plastics Corp. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | |
Monmouth Rubber & Plastics Durafoamâ„¢ N231XS 100% Neoprene Information provided by Monmouth Rubber & Plastics Corp. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | ASTM D624 |
Solvay Specialty Polymers Polidiemme® G/440 Thermoset Elastomer (TSE) Elastomer based compound crosslinkable by ambient moisture, consisting of a silane pregrafted base compound to be used with a catalyst masterbatch (Sioplas® method)Standards complying: Cenelec HD.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Fill/Transverse direction |
Saint-Gobain Chemlam® RL® RL4000 PTFE-Coated Non-woven Aramid Reinforced Laminate Description: The CHEMLAM® series features unique combinations of multi-layer fluoropolymer films laminated to a variety of reinforcement fabrics. The RL product line features a film of fully sint.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2042-3 Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 3.50 kN/m | 20.0 pli | JIS K6301-B |
Stellarchem GP-980 TPE Compound This grade of Stellarchem TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, complete.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® RU Rulon Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Rulon® films offer superior abrasion resistance when compared to conventional PTFE films. Service temperatures range from -100°F to 500°F (-73°C to +260°C). In rotating b.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2045-3 Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® 2302-3R UHMW Film Backing Acrylic Adhesive Pressure Sensitive Tape Description: UHMW polyolefin film tape provides anti-sticking and abrasion resistance properties for application temperatures ranging from -100°F to 225°F (-73°C to +107°C). Applications.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® A602 Aluminum Foil Backing Silicone Adhesive Pressure Sensitive Tape Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength |
Saint-Gobain CHR® T Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Fabric Break |
Saint-Gobain COHRlastic® 512AF Silicone Foam/Acrylic Adhesive Pressure Sensitive Tape Description: Strip-N-Stick® tape provides all the benefits of silicone rubber in an easy-to-apply, pressure-sensitive adhesive tape form. Compressible and flexible, it can conform to irregular su.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | |
ACC QSil 940 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting QSil 940 is a special purpose, two-component condensation cure siloxane elastomer that exhibits excellent release properties unless a primer is used which results in excellent adhesion. The material.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | |
ACC QSil 40 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting QSil 40 is a general purpose two-part, room temperature, condensation cure siloxane elastomer. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section Catalyst by weight. Cure speed.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | cured 7 mins @ 150°C |
ACC QSil 550R QSI Quantum Silicones Silicone Potting Material QSil 550Ris a 100% silicone solids elastomer designed for electronic potting applications. The two-component system offers a hard, thermally conductive, low modulus material that is readily repairab.. |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | |
Dow Corning 3110 SILICONE RUBBER ENCAPSULANT Two-part, white, condensation cure, moderate flow, general purpose encapsulant, cure speed varied by catalyst type and mix ratio.Information provided by Dow Corning |
|||
Tear Strength | 3.51 kN/m | 20.0 pli | Initial Tear Strength; ASTM D624 Die C |
Saint-Gobain Korel® K40-35 Medium Deflection Micro-cellular Polyurethane Foam Description: The Korel® series micro-cellular polyurethane foams are offered in a broad range of properties, making them ideal for a variety of gasketing and energy absorption needs. Korel® microc.. |