Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Vicat Softening Point = 302 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Vicat Softening Point 150 °C
302 °F
STN EN ISO 306
Plastcom PLASTALEN® PH 91 SD Polypropylene
Modified homopolymer PP for injection molding. General use in all industry branches. Delivered in natural mode and in the full RAL color scale.Information Provided by Plastcom spol. s r.o.
Vicat Softening Point 150 °C
302 °F
0.125 inch bar, 1 Kg; ASTM D1525
Network Polymers PC-2109
Description: Natural Flame Retardant PolycarbonateInformation provided by Network Polymers Inc.
Vicat Softening Point 150 °C
302 °F
Rate A; ISO 306/A50
Premix Thermoplastics PRE-ELEC® PP 1383
PRE-ELEC PP 1383 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE..
Vicat Softening Point 150 °C
302 °F
ISO 306/A50
Premix Thermoplastics PRE-ELEC® PP 1393 Conductive Thermoplastic Compound
PRE-ELEC® PP 1393 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a very low electrical resistivity,..
Vicat Softening Point 150 °C

@Load 5.001 kg
302 °F

@Load 11.03 lb
50°C/h; ISO 306
Polykemi AB POLYform POM C M140 TF2 Polyoxymethylene, Modified
Information provided by Polykemi AB
Vicat Softening Point 150 °C
302 °F
Rate A/50; ISO 306
SABIC Innovative Plastics Lexan® 955 PC (Europe-Africa-Middle East)
Lexan* 955 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in various opaque color..
Vicat Softening Point 150 °C
302 °F
Rate B/120; ISO 306
SABIC Innovative Plastics Lexan® BFL2015 PC (Asia Pacific)
Non-brominated, non-chlorinated flame retardant, glass reinforced PC. Opaque colors only
Vicat Softening Point 150 °C
302 °F
Rate B/120; ISO 306
SABIC Innovative Plastics Lexan® EX1632T PC (Europe-Africa-Middle East)
LEXAN* EX1632T polycarbonate resin, MVR (300C/1.2kg) 6 cm3/10min, high viscosity, branched, extrusion, mold release, UV stabilized, transparent, translucent and opaque colors. Multiwall sheet, Profi..
Vicat Softening Point 150 °C
302 °F
ASTM D1525
Hyosung Topilene B240T PP
B240T Extrusion Impact CopolymerApplications:Thermoforming sheetStationary sheetCharacteristics:High impactHigh stiffnessInformation provided by Hyosung Corporation
Vicat Softening Point 150 °C
302 °F
ASTM D1525
Hyosung Topilene S800 PP
S800 Injection Special Purpose GradeApplications:Electric home applianceHousewares applianceCharacteristics:Heat resistanceInformation provided by Hyosung Corporation
Vicat Softening Point 150 °C

@Load 5.10 kg
302 °F

@Load 11.2 lb
50°C/hr; ASTM D1525
LG Chemical Lupoy 1200-08 Polycarbonate Resin
Description: LUPOY PC 1200-08 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength...
Vicat Softening Point 150 °C
302 °F
50°C/h 50N; ISO 306
Mitsubishi Xantar® G2F 23 UR Polycarbonate-10% Glass Reinforced
Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Vicat Softening Point 150 °C
302 °F
50°C/h 50N; ISO 306
Mitsubishi Xantar® F 25 UR Polycarbonate
Xantar® materials are engineered for performance, consistency and reliability. This makes Xantar® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Vicat Softening Point 150 °C

@Load 5.00 kg
302 °F

@Load 11.0 lb
LATI Laticonther 83 CP/80 PA12, Impact Modified
High thermal conductivity product based on Polyamide 12 (PA12), impact modified. Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation pro..
Vicat Softening Point 150 °C
302 °F
Rate B/120; ISO 306
SABIC Innovative Plastics Noryl V0150BT PPE+HIPS
Noryl* V0150BT is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm ..
Vicat Softening Point 150 °C
302 °F
10N, 50°C/hr; ISO 306
SABIC Innovative Plastics SABIC PPCOMPOUND 19T1040 PP
SABIC® PPcompound 19T1040 is a general purpose, talc filled, heat stabilized homopolymer polypropylene compound. This compound exhibits high flow and is suitable for injection molding application..
Vicat Softening Point 150 °C
302 °F
Rate B/50; ASTM D1525
SABIC Innovative Plastics NORYL NH6020 PPE+HIPS (Europe-Africa-Middle East)
Noryl* NH6020 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 0.8 mm an..
Vicat Softening Point 150 °C
302 °F
Rate B/120; ISO 306
SABIC Innovative Plastics Noryl PX1115 PPE+HIPS (Europe-Africa-Middle East)
NORYL PX1115 is an unfilled, flame retardant material with a Vicat B/120 of 140°C according ISO 306. NORYL PX1115 is V1 at 1.2 mm according UL94 and halogen free according VDE/DIN 472 part 815.Th..
Vicat Softening Point 150 °C
302 °F
ASTM D1525
Total PPC 4944WZ Polypropylene, Impact Copolymer
ATOFINA 4944 polypropylene is a nucleated and controlled rheology impact copolymer. 4944WZ is characterized by improved stiffness and impact resistance, as well as low shrinkage and low warpage. I..
Vicat Softening Point 150 °C
302 °F
ASTM D1525
Dow NRD6-589 Polypropylene Random Copolymer Resin
DOW NRD6-589 Polypropylene Resin is intended for use in injection molding applications. It offers excellent balance of impact and stiffness.Consistent processabilityGood stiffness/impact balanceGoo..
Vicat Softening Point 150 °C
302 °F
50 N; ISO 306
Azoty Tarnow™ TARNOFORM 300 TF POM
Tribological modified grade low level addition of PTFE, which lower coefficient of friction and wear.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Vicat Softening Point 150 °C
302 °F
50 N; ISO 306
Azoty Tarnow™ TARNOFORM 400 LS POM
Injection molding grade based on Tarnoform 400 modified with soluble light stabilizers improving weathering stability.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
Vicat Softening Point 150 °C

@Load 1.02 kg
302 °F

@Load 2.25 lb
ASTM D1525
Carmel Olefins CAPILENE® SG 50 Polypropylene Impact Copolymer
Description: CAPILENE® SG 50 is a low melt flow rate impact copolymer suitable for injection molding applications. It exhibits good stiffness combined with high impact strength.Applications: CAP..
Vicat Softening Point 150 °C

@Load 1.02 kg
302 °F

@Load 2.25 lb
ASTM D1525
Carmel Olefins CAPILENE® Y 50 V Polypropylene Homopolymer
CAPILENE® Y 50 V is an ultra high melt flow rate polypropylene homopolymer suitable for thin walled injection molding and as a base resin for compounds applications. The product combines high stiff..
Vicat Softening Point 150 °C
302 °F
ISO 306
BASF Ultraform® N2520 L POM
Description: Is a POM, product having reduced electric surface resistance.Information provided by BASF
Vicat Softening Point 150 °C
302 °F
ISO 306
BASF Ultraform® S2320 0035 LEV POM
Description: Is a POM, free-flowing and rapidly solidifying standard grade with reduced emission potential for injection molding.Information provided by BASF
Vicat Softening Point 150 °C
302 °F
ISO 306
BASF Ultraform® S2320 0035 POM
Description: Is a POM, free-flowing and rapidly solidifying standard grade with improved impact strength for injection molding.Information provided by BASF
Vicat Softening Point 150 °C
302 °F
1 kg load; ISO 306
3M Dyneon™ PVDF 11010/0000 Polyvinylidene Fluoride
3M™ Dyneon™ PVDF 11010/0000 is a copolymer of VF2 and HFP (hexafluoropropylene). Recommended for flared tubing, it combines excellent chemical resistance, and dimensional stability with a moderate..
Vicat Softening Point 150 - 165 °C
302 - 329 °F
Average value: 154 °C Grade Count:8
Overview of materials for Acetal Copolymer, Glass Bead Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Glass Bead Filled". Each property range of values reported is minimum and maximum valu..
Vicat Softening Point 150 °C
302 °F
ISO 306
Unipetrol PP MONSTEN® EH 501 Polypropylene Impact Copolymer
Made for extrusion applications. LHTA stabilization. Impact copolymer.Information provided by Unipetrol RPA
Copyright © lookpolymers.com All Rights Reserved