Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 108 °C | 226 °F | Internal method |
Polimeri Europa Riblene® GP 26 Low Density Polyethylene - Coating Grade Riblene GP 26 is a high fluidity low density polyethylene resin (LDPE).Main Applications: Riblene GP 26 is suitable for coating applications where low neck-in and high draw-down are key factors. F.. |
|||
Melting Point | 108 °C | 226 °F | Internal method |
Polimeri Europa Riblene® MQ 10 Low Density Polyethylene - Injection Molding Riblene MQ 10 is a good fluidity low density polyethylene resin (LDPE).Parts made with Riblene MQ 10 are characterized by a high flexibility.Main Applications: Riblene MQ 10 is suitable for injecti.. |
|||
Melting Point | 108 °C | 226 °F | Internal method |
Polimeri Europa Riblene® MQ 10 R Low Density Polyethylene - Injection Molding Riblene MQ 10 R is a good fluidity low density polyethylene resin (LDPE).Parts made with Riblene MQ 10 R are characterized by a high flexibility.Main Applications: Riblene MQ 10 R is suitable for i.. |
|||
Melting Point | 108 °C | 226 °F | Peak Melting Temperature; ExxonMobil Method |
ExxonMobil LD 146.NH Packaging Film Resin
(discontinued **) LD 146.NH is a homopolymer film resin offering good clarity, toughness, and stiffness. It is used in food packaging and laminating film.Information provided by ExxonMobil Chemical |
|||
Melting Point | 108 °C | 226 °F | Exxon Method |
ExxonMobil Escorene® LD-140 LDPE Industrial Film resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A fractional melt index homopolymer resin for production of film with very good toughness.Applications: Heavy duty bags. Data for film properties b.. |
|||
Melting Point | 108 °C | 226 °F | Freezing Point, DSC; ASTM D3418 |
DuPont Bynel® 41E689 Adhesive Resin
(discontinued **) Bynel® Series 4100 resins are anhydride-modified linear low-density polyethylene (LLDPE) resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment design.. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 2012 D SW 413 LDPE Cable sheathingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® V 2520 J Ethylene Vinyl Acetate, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | Eutectic |
Indium Corp. Indalloy® 224 In-Sn-Zn Solder Alloy Pb free solder, high dross due to Zn.Information provided by the manufacturer, Indium Corporation. |
|||
Melting Point | 108 - 124 °C | 226 - 255 °F | ASTM D127 |
IRPC Polimaxx Polene PE100N Polypropylene Wax APPLICATIONS: CARRIER FOR PIGMENT CONCENTRATES, LUBRICANT FOR PLASTICS, RUBBER EXTRUSION, HOT MELT ADHESIVE, PAPER COATING |
|||
Melting Point | 108 - 124 °C | 226 - 255 °F | ASTM D127 |
IRPC Polimaxx Polene PE200N Polypropylene Wax APPLICATIONS: CARRIER FOR PIGMENT CONCENTRATES, LUBRICANT FOR PLASTICS, RUBBER EXTRUSION, HOT MELT ADHESIVE, PAPER COATING |
|||
Melting Point | 108 - 124 °C | 226 - 255 °F | ASTM D127 |
IRPC Polimaxx Polene PE300N Polypropylene Wax APPLICATIONS: CARRIER FOR PIGMENT CONCENTRATES, LUBRICANT FOR PLASTICS, RUBBER EXTRUSION, HOT MELT ADHESIVE, PAPER COATING |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1842 D SW 413 LDPE Cable sheathingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 2003 H LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1804 H LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1810 E LDPE Blow moldingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1812 D LDPE Insulation for cableData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1812 E LDPE Insulation for cableData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1840 D LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | |
LyondellBasell Lupolen® 1840 H LDPE Blow moldings, injection moldings, film.Data was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Melting Point | 108 °C | 226 °F | ISO 11357 |
Total LDPE 1070 MN 18 C Low Density Polyethylene - Injection Molding and Compounding LDPE 1070 MN 18 C is a low density polyethylene made by a high pressure autoclave process without antioxidant. Grade adapted to the production of flexible parts with a high production rate.Applicat.. |
|||
Melting Point | 108 °C | 226 °F | Dow Method (DSC) |
Dow 621I Low Density Polyethylene (LDPE) Specialty resin designed for high melt strength applications Provides excellent bubble stability Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 Information provided by Dow |
|||
Melting Point | 108 °C | 226 °F | Dow Method (DSC) |
Dow AFFINITY™ PT 1409 Polyolefin Plastomer (POP) AFFINITY™ PT 1409 Polyolefin Plastomer (POP) is produced via INSITE™ Technologies from Dow Plastics. Resin blended with 20 wt% LDPE to improve extrusion coating performance.Information provided b.. |
|||
Melting Point | 108 °C | 226 °F | ASTM D3418 |
Petroquimica Triunfo Trithene® JX 7300 LDPE - Injection Molding The Trithene® JX 7300 resin is a low-density polyethylene (LDPE) with outstanding flow ability and flexibility. Those attributes are especially important to meet the requirements for fast injection.. |
|||
Melting Point | 108 °C | 226 °F | ASTM D3418, ISO 3146 |
DuPont™ Fusabond® M603 Polymer Modifier Fusabond® M603 Resin is a random ethylene copolymer, incorporating a monomer which is classified as being a maleic anhydride equivalent for application uses.Fusabond® M603 is used in a variety of .. |