- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 644 °F
Polymer Property : Melting Point = 644 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | >= 340 °C | >= 644 °F | ISO 3146 |
| Panjin Zhongrun Chemerize 085P Low Viscosity CoPEEK Information provided by Bieglo Gmbh. |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® 1000 IM Injection Molded Unfilled Polyetheretherketone (ASTM Product Data Sheet) Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam |
|||
| Melting Point | 340 °C | 644 °F | ISO 11357 |
| Quadrant EPP Ketron® 1000 LSG PEEK, Biocompatibility tested (ISO Product Data Sheet) KETRON® PEEK LSG natural / black stock shapes are produced from batches of Victrex PEEK. This material exhibits a unique combination of mechanical properties, temperature and chemical resistance. .. |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® 1000 PEEK, Extruded Unfilled Polyetherether Ketone (ASTM Product Data Sheet) |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® CA30 PEEK, Extruded 30% Carbon Fiber Reinforced Polyetherether Ketone (ASTM Product Data Sheet) |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® CM GF30 Compression Molded, 30% Glass Reinforces Polyethererther Ketone(ASTM Product Data Sheet) |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® GF30 PEEK, Extruded 30% Glass-Reinforced Polyetherether Ketone (ASTM Product Data Sheet) |
|||
| Melting Point | 340 °C | 644 °F | Crystalline, Peak; ASTM D3418 |
| Quadrant EPP Ketron® HPV PEEK High Pressure Velocity Polyetherether Ketone (ASTM Product Data Sheet) This bearing grade of extruded Ketron PEEK offers the lowest coefficient of friction and best machinability of all Ketron grades. It is ideal for low wear, high PV parts that require chemical resis.. |
|||
| Melting Point | 340 °C | 644 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Quadrant EPP Ketron® TX PEEK + solid lubricant, extruded (ISO Data) This member of the Ketron PEEK family has been developed especially for the food industry. Like Ketron PEEK-1000, this new internally lubricated material has a food contact compliant composition, bu.. |
|||
| Melting Point | 340 °C | 644 °F | ASTM D3417 |
| Quantum PEEK 30% Carbon Filled Information provided by Quantum Advanced Engineering Plastics |
|||
| Melting Point | 340 - 372 °C | 644 - 702 °F | Average value: 349 °C Grade Count:11 |
| Overview of materials for Polyaryletherketone (PAEK), Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyaryletherketone (PAEK), Carbon Fiber Filled". Each property range of values reported is minimum and .. |
|||
| Melting Point | 340 °C | 644 °F | Peak; ASTM D3418 |
| Solvay Specialty Polymers AvaSpire® AV-722 SL30 Polyaryletherketone (PAEK)
(Unverified Data**) AV-722 SL30 is a wear resistant grade of AvaSpire polyaryletherketone (PAEK) designed to provide low wear rates in both non-lubricated and lubricated environments. In addition to the outstanding wea.. |
|||
| Melting Point | 340 °C | 644 °F | Peak; ASTM D3418 |
| Solvay Specialty Polymers AvaSpire® AV-848 CF30 Polyaryletherketone (PAEK)
(Unverified Data**) AvaSpire AV-848 CF30 is a 30% carbon fiber-reinforced, high-temperature, polyaryletherketone (PAEK) that has been specifically formulated to provide several performance advantages over comparable gr.. |
|||
| Melting Point | 340 °C | 644 °F | Peak; ASTM D3418 |
| Solvay Specialty Polymers KetaSpire® KT-820 GF30 Polyetheretherketone (PEEK)
(Unverified Data**) KetaSpire KT-820 GF30 is a medium flow, 30% glass fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire.. |
|||
| Melting Point | >= 340 °C | >= 644 °F | ISO 3146 |
| Panjin Zhongrun Chemerize 012G High Viscosity CoPEEK Information provided by Bieglo Gmbh. |
|||
| Melting Point | >= 340 °C | >= 644 °F | |
| Hong Kun Group DBDPE Flame Retardant Chemical Name:1,2-Bis(pentabromophenyl) ethaneDecabromodiphenylethaneDecabromodiphenyl EthylCAS No. 84852-53-9All information provided by Hongkun Group |
|||
| Melting Point | 340 °C | 644 °F | ASTM D3418 |
| Solvay Specialty Polymers AvaSpire® AV-621 Polyaryletherketone (PAEK) AvaSpire® AV-621 is an unreinforced polyaryletherketone (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. .. |
|||
| Melting Point | 340 °C | 644 °F | DSC |
| Solvay Specialty Polymers KetaSpire® KT-850P Polyetheretherketone (PEEK) KetaSpire® KT-850P is the intermediate-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color coarse powder form. KetaSpire® PEEK is produced to the highest industr.. |
|||
| Melting Point | 340 °C | 644 °F | ASTM D3418 |
| Solvay Specialty Polymers KetaSpire® KT-851 NL Polyetheretherketone (PEEK) KetaSpire® KT-851 NL resin is a depth-filtered grade of polyetheretherketone (PEEK) supplied in non-lubricated, natural-color pellet form and is specially designed for use in extruded wire insula.. |
|||
| Melting Point | 340 °C | 644 °F | DSC |
| Westlake Plastics PEEK Film Made from VICTREX® Polymer Extremely high temperature resistance and continuous use temperature. Excellent flexural and tensile properties. Good abrasion and rain erosion resistance. Excellent chemical resistance. Excelle.. |
|||
| Melting Point | 340 °C | 644 °F | DSC |
| Wolf Kunststoff ZEDEX® ZX-324V11T A3L PEEK Polymer, Reinforced Main Charactistics: Stress resistant; High impact strength at 196 ° C Applications: Shipbuilding; Chemical Engineering; Automitve Technology; Machine ToolsInformation provided by Zedex |
|||
| Melting Point | 340 °C | 644 °F | DSC |
| Wolf Kunststoff ZEDEX® ZX-324V1T A3H PEEK Polymer, Reinforced Main Characteristics: High resilience; High elasticity; Low permanent deformation; Stress resistant; High strength at temperatures above 140 ° CApplications: Shipbuilding; Chemical Engineering; Aut.. |
|||
| Melting Point | 340 °C | 644 °F | DSC |
| Wolf Kunststoff ZEDEX® ZX-324V2T A3F PEEK, PTFE Modified Reduced friction; High wear resistance; High elasticity; Stress resistantApplications: Shipbuilding; Chemical Engineering; Automotive Technology; Machine ToolsInformation provided by Zedex |
|||
| Melting Point | 340 °C | 644 °F | ISO 1218 Method A; DIN 53736 |
| Zell-Metall Engineering Plastics Zellamid 1500T (PEEK modified) Zellamid® 1500 (Polyetheretherketone - PEEK, natural) is the registered trademark for Zell-Metall’s semi-crystalline high performance thermoplastic which exhibits a unique combination of high m.. |
|||
| Melting Point | 340 °C | 644 °F | |
| Ensinger Tecapeek® CLASSIX XRO Polyetheretherketone (PEEK) TECAPEEK™ high performance polymer, made from Victrex PEEK polymer, has successfully replaced glass, stainless steel and titanium in a growing range of medical applications. The material's excepti.. |
|||
| Melting Point | 340 °C | 644 °F | |
| Ensinger Tecapeek® Polyetheretherketone (PEEK) TECAPEEK™ high performance polymer, made from Victrex PEEK polymer, has successfully replaced glass, stainless steel and titanium in a growing range of medical applications. The material's excepti.. |
|||
| Melting Point | 340 °C | 644 °F | |
| Ensinger Tecapeek® XP98 XRO Polyetheretherketone (PEEK), compression molded, 30% carbon fiber filled, x-ray opaque TECAPEEK™ high performance polymer, made from Victrex PEEK polymer, has successfully replaced glass, stainless steel and titanium in a growing range of medical applications. The material's excepti.. |
|||
| Melting Point | 340 °C | 644 °F | Peak; ASTM D3418 |
| Solvay Specialty Polymers AvaSpire® AV-621 CF30 Polyaryletherketone (PAEK)
(Unverified Data**) AvaSpire AV-621 CF30 is a 30% carbon fiber reinforced version of AvaSpire AV-621. It offers better dimensional stability and warp resistance than 30% carbon fiber reinforced PEEK. The AV-621 CF30 gr.. |
|||
| Melting Point | 340 °C | 644 °F | Peak; ASTM D3418 |
| Solvay Specialty Polymers AvaSpire® AV-630 Polyaryletherketone (PAEK)
(Unverified Data**) AvaSpire AV-630 is an unreinforced polyaryletherketone (PAEK) developed as an alternative to low melt flow PEEK for the extrusion of ultra-thin films. Films with thicknesses as low as 0.2 mils (5 mi.. |
|||
| Melting Point | >= 340 °C | >= 644 °F | ISO 3146 |
| Panjin Zhongrun Chemerize 021G Medium Viscosity CoPEEK Information provided by Bieglo Gmbh. |
|||
Copyright © lookpolymers.com All Rights Reserved