Thermal Properties | Metric | English | Comments |
---|---|---|---|
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
S&E Specialty Polymers GTPE-2272ALC PVC Application: Flame retardant, matt finish, 90° C, flexible, oil resistant, TPE jacketing material.Information provided by S&E Specialty Polymers |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
PolyOne Geon™ Vinyl Flexible XV3798 Polyvinyl Chloride, Flexible (PVC, Flexible) All ingredients used in the formulation of this compound are listed in the United States FDA Code of Federal Regulations, Title 21. The only restriction is that the plasticizer is For foods of high .. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
ExxonMobil Santoprene® 121-80M300 Thermoplastic Rubber
(discontinued **) Description: A black thermoplastic high-flow elastomer for excellent injection molding performance with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloropren.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Advanced Elastomer Systems VistaFlex® 715-N Thermoplastic Rubber
(discontinued **) Description: A black high-flow thermoplastic elastomer especially designed for injection molding applications. It replaces soft thermoplastics such as SBS, SEBS, and PVC blends. Supplied as free-f.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Multibase Multi-Flex® A 9002 MR TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good .. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
Spartech 2850-50 PVC for Regulated Applications Information provided by Spartech |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Teknor Apex Flexalloy® 3501-60-NT Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MW, Ethylene Oxide SterilizableForms-PelletsProcessing-Extrusion, Injection MoldingAppe.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Teknor Apex Flexalloy® 9601-72 Polyvinyl Chloride, Elastomer Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; High Heat Resistance; Low Temperature Flexibility; Sunlight Resistant (720 hours) Uses Cable Jacketing Wire Types: SEOW; SEW; SJEOW;.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 504E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an extrusion grade olefinic thermoplastic elastomer suitable for profile extrusion or blow molding. Characteristics of this product include excellent low temperature.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1008-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics .. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1008-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics .. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ISO 974 |
Chengdu Polyster CH4132 Thermoplastic Polyether-ester Elastomer (TPEE) Poly-basic block copolymer. Good compatibility with POM. For blending with POM to improve impact resilience properties.Information provided by Chengdu Polyster Co., Ltd. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ISO 974 |
Chengdu Polyster H8570 Thermoplastic Polyether-ester Elastomer (TPEE) High modulus molding and injection grade. Contains improved color- stable antioxidants. Excellent heat-ageing resistance and toughness. Applications requiring high strength, high toughness and good .. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
Fainplast Compounds GS 55/UV Flexible PVC, Injection Molding for Transparent Technical Items Outdoor protections for switches anti-UV |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Colorite Polymers Weatherflex™ CS1536WX (NTL70B) Wire and Cable Vinyl Compound Description: Colorite specialty wire and cable compounds feature low smoke properties, excellent flame retardance, low temperature flexibility, and resistance to abrasion and chemicals. All are avai.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D746 |
Colorite Polymers MULTICHEM™ 7014 Vinyl-Urethane Blend Description: MULTICHEM™ is characterized by:Greater ResiliencyImproved ElasticityLow Temperature PropertiesLower ExtractabilityMolding and ExtrusionInformation provided by Colorite Polymers. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | Cold Flex; ISO 458/2 |
Fainplast Compounds PH 50/1 Flexible PVC, Transparent Extrusion Transparent profiles |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D-746 |
Axiall 68141 Wire & Cable Flexible PVC 90°C rated, non-lead stabilized compound designed for use as an SE and USE jacket.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D726 |
Arkema Group LOTADER® 3410 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 3410 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 3410 is a versatile adhesive for extrusion coating or lam.. |
|||
Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D726 |
Arkema Group LOTADER® 3430 Terpolymer Ethylene - Acrylic Ester - Maleic Anhydride LOTADER 3430 is a random terpolymer of Ethylene, Acrylic Ester and Maleic Anhydride, polymerized by high-pressure autoclave process. LOTADER 3430 is a versatile adhesive for extrusion coating or lam.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | ASTM D-746 |
Axiall 7540 Moldings & Extrusions Flexible PVC A high quality clear outdoor grade PVC molding and extrusion compound formulated for good UV light resistance and excellent low temperature properties.Information provided by Georgia GulfGeorgia Gul.. |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 504 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Brittleness Temperature | <= -50.0 °C | <= -58.0 °F | ASTM D746 |
Teknor Apex Elexar® EL-8730A Thermoplastic Elastomer Notes: Sunlight Resistant; Temperature Rating: 125°C Processing Method: Extrusion; Injection MoldingInformation Provided by Teknor Apex |
|||
Brittleness Temperature | -50.0 °C | -58.0 °F | |
A. Schulman POLYTROPE™ TPP 508 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 508 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi.. |