- HOME
- POLYMER SEARCH
- Polymer Property : Processing Temperature = 60.0 °C
Polymer Property : Processing Temperature = 60.0 °C Product List
Processing PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | >= 60.0 °C | >= 140 °F | Activation Temperature |
| Lubrizol Advanced Materials Pearlstick® 48-60/08 Linear Thermoplastic Polyurethane Elastomer
(discontinued ** Pearlstick 48-60/08 is an elastic, linear, aromatic polyurethane with a very high crystallization rate and a low-medium thermoplasticity level, available as pellets.Solubility: Pearlstick 48-60/08 .. |
|||
| Processing Temperature | 60.0 °C | 140 °F | Min. Activation Temp; EN 12961 |
| Lubrizol Advanced Materials Pearlstick® 46-73/19 Polyester based TPU
(discontinued **) TPUs for Solvent-based adhesivesApplications: Shoe, OthersInformation provided by Merquinsa |
|||
| Processing Temperature | 60.0 - 200 °C | 140 - 392 °F | Average value: 113 °C Grade Count:19 |
| Overview of materials for Acetal Homopolymer, Unreinforced, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Acetal Homopolymer, Unreinforced, Impact Grade". Each property range of values reported is minimum and m.. |
|||
| Processing Temperature | 60.0 - 150 °C | 140 - 302 °F | Hardening Temperature |
| Möller Medical NanoSkin 78 NanoCoating Transparent, scratch-resistant coating also for plastics with good resistance against dissolvents.Information provided by Möller Medical, Member of CENTROTEC Group |
|||
| Processing Temperature | 60.0 °C | 140 °F | EN-12961 |
| Lubrizol Advanced Materials Pearlstick® D40-70/33 Linear Thermoplastic Polyurethane Pearlstick D40-70/33 is an elastic, linear, aromatic polyurethane, supplied in form of white spherical granules with an extremely high crystallization rate and a very low thermoplasticity level. S.. |
|||
| Processing Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |
| Gwent Electronic Materials D50706P3 Polymer Dielectric This material is a blue colored screen printable polymer Dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode... |
|||
| Processing Temperature | >= 60.0 °C | >= 140 °F | Activation Temperature; EN-12961 |
| Lubrizol Advanced Materials Pearlstick® 48-60/25 Linear Thermoplastic Polyurethane Elastomer Pearlstick 48-60/25 is an elastic, linear, aromatic polyurethane with a very high crystallization rate and a low-medium thermoplasticity level, available as pellets.Solubility: Pearlstick 48-60.. |
|||
| Processing Temperature | 60.0 °C | 140 °F | non show side |
| Lubrizol Telene 1610 A/B & A/BK Dicyclopentadiene (DCPD) Telene® is a two-component system based on extra-high purity dicyclopentadiene (DCPD). Telene® is processed using a standard high-pressure RIM Equipment (Reaction Injection Molding). Telene® resu.. |
|||
| Processing Temperature | 60.0 °C | 140 °F | non show side |
| Lubrizol Telene 1620 A/BK Dicyclopentadiene (DCPD) Telene® is a two-component system based on extra-high purity dicyclopentadiene (DCPD). Telene® is processed using a standard high-pressure RIM Equipment (Reaction Injection Molding). Telene® resu.. |
|||
| Processing Temperature | 60.0 °C | 140 °F | humidified air drying temperature;2-8h |
| Borealis FR4845 Irradiation Crosslinkable Polyethylene Compound FR4845 is an Irradiation Crosslinkable non-halogen flame retardant compound developed for the automotive wire market. Applications: FR4845 is intended for use as a 125º C rated primary insulation .. |
|||
| Processing Temperature | 60.0 °C | 140 °F | hopper drying (4h) |
| Borealis Supersmooth™ LE0550 Polyethylene Insulation Compound, Crosslinkable Supersmooth™ LE0550 is a crosslinkable black polyethylene compound, specially designed for bonded semiconductive screen applications. Applications: Supersmooth™ LE0550 is intended for semiconduct.. |
|||
| Processing Temperature | 60.0 - 80.0 °C | 140 - 176 °F | Hopper |
| Eurostar Staramide ALY430A PA66, Glass Fiber Reinforced, Injection Molding Staramide ALY430A is a Glass Fiber Reinforced Polyamide 66, Injection Molding ResinInformation provided by Eurostar. |
|||
| Processing Temperature | 60.0 - 80.0 °C | 140 - 176 °F | Hopper |
| Eurostar Staramide PX08000 PA6, Impact Modified, Injection Molded Staramide PX08000 is an Impact Modified Polyamide 6 Injection Molding Resin (also known as Star X 2006)Information provided by Eurostar. |
|||
| Processing Temperature | 60.0 - 240 °C | 140 - 464 °F | Injection |
| Alliance Polymers Viprene™ G45D-32U-BLK Thermoplastic Vulcanizate Elastomer Viprene™ G45D-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Processing Temperature | 60.0 - 240 °C | 140 - 464 °F | Injection |
| Alliance Polymers Viprene™ G45D-32U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ G45D-32U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Processing Temperature | 60.0 - 120 °C | 140 - 248 °F | Barrel temperature |
| Azoty Tarnow™ TARNOFORM 200 HI4 POM Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Processing Temperature | 60.0 °C | 140 °F | Min. Activation Temp; EN 12961 |
| Lubrizol Advanced Materials Pearlstick® 46-73/27 Polyester based TPU
(discontinued **) TPUs for Solvent-based adhesivesApplications: ShoeInformation provided by Merquinsa |
|||
Copyright © lookpolymers.com All Rights Reserved