Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 10.0 min @Temperature 121 °C |
0.167 hour @Temperature 250 °F |
Let sit for 24 hours to develop a final cure |
Lord Adhesives HPC-5C Hydrogenated Nitrile Butadiene Rubber Coating LORD HPC-5B and HPC-5C are one-part, room temperature curing HNBR coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fluid and ozone resista.. |
|||
Cure Time | 10.0 min @Temperature 80.0 °C |
0.167 hour @Temperature 176 °F |
|
Gwent Electronic Materials C2000218D5 Silver/Silver Chloride Paste Silver/Silver Chloride Paste has a ratio of Silver to Silver Chloride of 90/10. It is specifically designed to give good adhesion to ceramic substrates. Applications in medical diagnostics, environm.. |
|||
Cure Time | 10.0 min @Temperature 125 °C |
0.167 hour @Temperature 257 °F |
|
Gwent Electronic Materials C2000904P3 Platinum Ink It can be used on partially stabilized zirconia and tape cast Materials. The Platinum powder contained within this paste has low shrinkage and high adhesion to ceramic substrates. Screen Printing E.. |
|||
Cure Time | 10.0 min @Temperature 125 °C |
0.167 hour @Temperature 257 °F |
|
Gwent Electronic Materials C2011004P5 Platinum Ink Platinum Ink is designed for oxygen sensor applications. This is a pure platinum ink with no inorganic additions to give maximum response to oxygen. It is suitable for firing on to other high tempe.. |
|||
Cure Time | 10.0 min @Temperature 80.0 °C |
0.167 hour @Temperature 176 °F |
|
Gwent Electronic Materials C2050106D7 Carbon Graphite Ink This Carbon Graphite Ink is designed to be used for screen printing working electrodes. This is an ink which has been optimized to give superior electrochemical performance. It gives excellent elec.. |
|||
Cure Time | 10.0 min @Temperature 125 °C |
0.167 hour @Temperature 257 °F |
|
Gwent Electronic Materials C2071218D1 Gold Ink Gold Ink C2071218D1 is a fritted system that has been designed as a screen printing termination ink NTC components. It is also suitable for firing onto other high temperature substrates.This product.. |
|||
Cure Time | 10.0 min @Temperature 121 °C |
0.167 hour @Temperature 250 °F |
Let sit for 24 hours to develop a final cure |
Lord Adhesives HPC-3B Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Cure Time | 10.0 min @Temperature 125 °C |
0.167 hour @Temperature 257 °F |
|
Tra-Con Tra-Bond 77-2LTC Low Temperature Cure SMD Adhesive TRA-BOND 77-2LTC one component, solvent-free, insulative epoxy adhesive is designed to cure at temperatures as low as 80°C. This adhesive is specifically designed for attaching surface mounted devi.. |
|||
Cure Time | 10.0 min @Temperature 125 °C |
0.167 hour @Temperature 257 °F |
|
Tra-Con Tra-Bond F253HV Color Keyed High Temperature Epoxy Adhesive TRA-BOND F253HV is a clear, high temperature, two-part epoxy formulation that changes colors during the curing process to indicate cure status. The unmixed components are light yellow; the mixture i.. |
|||
Cure Time | 10.0 min @Temperature 100 °C |
0.167 hour @Temperature 212 °F |
Minimum Bond Line |
Epoxy Technology EPO-TEK® 360 Low Viscosity Optical Epoxy Adhesive Product Description: EPO-TEK® 360 is a two component, high-temperature grade epoxy for semiconductor, electronics, fiber optics and medical applications.Advantages & Application Notes: Built in col.. |
|||
Cure Time | 10.0 min @Temperature 100 °C |
0.167 hour @Temperature 212 °F |
minimum |
Epoxy Technology EPO-TEK® 360T High Temperature Epoxy Material Description: A two component, high-temperature grade, electrically and thermally insulating epoxy for semiconductor, electronics, fiber optics and medical applications. It is a thixotropic.. |
|||
Cure Time | 10.0 min @Temperature 100 °C |
0.167 hour @Temperature 212 °F |
minimum |
Epoxy Technology EPO-TEK® OE188 High Temperature Silica-Filled Epoxy Product Description: EPO-TEK® OE188 is a low CTE, designed for semiconductor and fiber optic applications. Advantages & Application Notes: Paste-like viscosity allows for application by dispensing.. |
|||
Cure Time | 10.0 min @Temperature 150 °C |
0.167 hour @Temperature 302 °F |
|
Atom Adhesives AA-DUCT 2979 Epoxy Adhesive AA-DUCT 2979 is a fast curing one part epoxy adhesive with superior electrical conductivity and bonding capability. AA-DUCT 2979 has been shown to retain their properties through hundreds of hours o.. |
|||
Cure Time | 10.0 min @Temperature 75.0 °C |
0.167 hour @Temperature 167 °F |
Recoat, at 50% humidity |
Blue River Coatings High Performance Acrylic Sanding Sealer BLUE RIVER COATINGS HIGH PERFORMANCE ACRYLIC SANDING SEALER is a waterbased wood sealer to fill the grain. The product is designed to be a sandable self-sealing topcoat for wood. HIGH PERFORMANCE AC.. |
|||
Cure Time | 10.0 min @Temperature 75.0 °C |
0.167 hour @Temperature 167 °F |
Recoat, at 50% humidity |
Blue River Coatings Hyfro-Flex Polyurethane Top Coat BLUE RIVER COATINGS HYDRO-FLEX POLYURETHANE TOPCOAT is a water dispersible polyurethane. When the customer receives HYDRO-FLEX, it is already formed in the container, where as the solvent base type,.. |
|||
Cure Time | 10.0 min @Temperature 130 °C |
0.167 hour @Temperature 266 °F |
box oven |
Gwent Electronic Materials C2090210P12 Silver Ink This product is part of a range of Heat Curable Inks designed specifically for use in Electro Luminescent systems. These products are based on a unique curing process that results in the low tempera.. |
|||
Cure Time | 10.0 min @Temperature 130 °C |
0.167 hour @Temperature 266 °F |
box oven |
Gwent Electronic Materials D2090130P5 Pink Dielectric Ink This product is part of a range of Heat Curable Inks designed specifically for use in Electro Luminescent systems. These products are based on a unique curing process that results in the low tempera.. |
|||
Cure Time | 10.0 min @Temperature 75.0 °C |
0.167 hour @Temperature 167 °F |
Recoat, at 50% humidity |
Blue River Coatings Hydro-Gloss 2-Part Polyurethane Top Coat BLUE RIVER COATINGS HYDRO-GLOSS 2-PART POLYURETHANE TOPCOAT is a water dispersible polyisocyanate coating. HYDRO-GLOSS provides outstanding coverage, excellent durability, and ease of application as.. |
|||
Cure Time | 10.0 min @Temperature 130 °C |
0.167 hour @Temperature 266 °F |
box oven |
Gwent Electronic Materials R2070613P2 Resin Binder This product is part of a range of Heat Curable Inks designed specifically for use in Electro Luminescent systems. Phosphor Inks containing these polymers combine excellent chemical, environmental w.. |