Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 80.0 - 100 kV/mm | 2030 - 2540 kV/in | ISO.243 DN.53481 |
Polimersan Plastics POLIKES® (PA 6 G) Cast Polyamide POLIKES® PA6 G (CAST POLYAMIDE) is a plastic with high physical, electrical and chemical resistance. Its resistance is high especially against strokes and loads. Its temperature resistance is high.. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
PolyOne Bergamid™ A70 G25 H natur TM-X Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
PolyOne Bergamid™ A700 blue VN4817CF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
PolyOne Bergamid™ A700 G20 U-SO Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
PolyOne Bergamid™ A700 G25 U-SO Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
Styrolution Styrolux 3G55 SBC Styrolux 3G55 is a thermoplastic styrene-butadiene block copolymer which is suitable for film and sheet extrusion, and thermoforming. It offers and outstanding combination of crystal clarity and ex.. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60243-1 |
Styrolution Styrolux 684D SBC Styrolux 684D is a thermoplastic styrene-butadiene block copolymer which is suitable for injection molding, extrusion, and thermoforming. It offers an outstanding combination of crystal clarity and.. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PB302G50 Nylon 6, 50% Glass Fiber 50% glass fiber reinforced, UV and heat stabilized polyamide approved and listed by W.R.C potable water and NSF/ANSI61 internationalInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PA320G6 Nylon 6.6, 30% Glass Fiber, Flame Retardant 30% glass fiber reinforced, flame retardant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek PA340S4 Nylon 66 for Injection Molding, 20% Glass-Beads Reinforced 20% Glass-beads reinforced Nylon 66 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB300G5 Nylon 6, 15% Glass Fiber 15% glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB300G7 Nylon 6, 35% Glass Fiber 35% glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB302G3 Nylon 6, 15% Glass Fiber 15% glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB305G33 Nylon 6, 33% Glass Fiber 33% glass fiber reinforced, heat stabilized and UV stabilized polyamide 6 approved and listed by W.R.C and NSF/ANSI 61 international for potable waterInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB306G6 Nylon 6, 30% Glass Fiber 30% glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek PB315G33 Nylon 6 for Injection Molding, 33% Glass Fiber Reinforced, UV and Heat Stabilized 33% Glass fiber reinforced, UV and heat stabilized Nylon 6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek RA325J5 Nylon 6.6, 25% Glass beads and Glass Fiber, Flame Retardant 25% glass beads and glass fiber reinforced, flame retardant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek PB300G2 Nylon 6 for Injection Molding, 10% Glass-Fiber Reinforced 10% Glass-fiber reinforced, heat stabilized Nylon 6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek PB300G4 Nylon 6 for Injection Molding, 20% Glass-Fiber Reinforced 20% Glass fiber reinforced, heat stabilized Nylon 6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek PB305G33BK37 Nylon 6, 33% Glass Fiber Reinforced, UV and Heat Stabilized 33% Glass fiber reinforced, UV and heat stabilized Nylon 6. Approved and listed by W.R.A.S. and NSF/ANSI 61 International for potable water.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB310G6 Nylon 6, 33% Glass Fiber 33% glass fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram RamOfin PPH308G50 Polypropylene, 50% Glass Fiber, Impact Modified 50% Glass fiber reinforced, heat stabilized, impact modified polypropylene for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | ASTM D149, IEC 243 |
EPICHEM Epinyl PA 6 GF 30 H Polyamide 6, 30% Glass, Heat Stabilized Characteristics: medium viscosity, 30% glass fibre, heat stabilized |
|||
Dielectric Strength | >= 80.0 kV/mm | >= 2030 kV/in | in transformer oil; IEC 60243-1 |
CENTROPLAST CENTROLAB HT Polypropylene Higher Temperatures PP-HT is a semi-crystalline plastic, with high acid and chemical resistance and mechanical strength. Due to its high resistance to temperature, PP-HT-plastics are often used in medical technology as.. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek RA321G6 Nylon 6.6, 30% Glass Fiber, Flame Retardant 30% glass fiber reinforced, flame retardant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | IEC 60250 |
Polyram PlusTek RA325G4 Nylon 66 for Injection Molding, 20% Glass-Fiber Reinforced, Self-Extinguishing, Halogen Free 20% Glass-fiber reinforced, self-extinguishing halogen free Nylon 66 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Polyram PlusTek PB312J6 Nylon 6, 30% Glass Fiber 30% glass-fiber reinforced polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |