- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Glass Filled, Molded
- Azoty Tarnow™ TARFLEN SM-S15G2 PTFE
Azoty Tarnow™ TARFLEN SM-S15G2 PTFE
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Glass Filled, Molded |
| Manufacturer | Azoty Tarnow™ (Zaklady Azotowe) |
| Trade Name | TARFLEN |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Azoty Tarnow™ TARFLEN SM-S15G2 PTFE.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Tarflen SM1 reinforced with 15% glass fibers and 2% graphite for standard compression molding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.21 g/cc | 0.0798 lb/in³ | ISO 1183 |
| Particle Size | 40 µm | 40 µm | Average |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 58 | 58 | ISO 868 |
| Ball Indentation Hardness | 39.0 MPa | 5660 psi | ISO 2039-1 |
| Tensile Strength, Yield | 17.0 MPa | 2470 psi | ISO 527 |
| Elongation at Break | 260 % | 260 % | ISO 527 |
| Izod Impact, Notched | 1.20 J/cm | 2.25 ft-lb/in | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 65.0 µm/m-°C @Temperature 20.0 °C |
36.1 µin/in-°F @Temperature 68.0 °F |
ASTM E 831 |
| Melting Point | 327 °C | 621 °F | |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.00e+13 ohm-cm | 2.00e+13 ohm-cm | IEC 60093 |
| Surface Resistance | 2.00e+13 ohm | 2.00e+13 ohm | IEC 60093 |
| Dielectric Constant | 7.0 | 7.0 | IEC 60250 |
| Dielectric Strength | 7.00 kV/mm | 178 kV/in | IEC 60243-1 |
| Dissipation Factor | 0.30 | 0.30 | IEC 60250 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 370 °C | 698 °F | Molding |
| Back Pressure | 35.0 - 40.0 MPa | 5080 - 5800 psi | Molding Pressure |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved