Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultramid® B3S BK00464 PA6 (Dry)

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer BASF
Trade Name Ultramid®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BASF Ultramid® B3S BK00464 PA6 (Dry).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Ultramid B3S BK00464 is an easy flowing, pigmented black, finely crystalline injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500.
Physical Properties Metric English Comments
Density 1.13 g/cc
0.0408 lb/in³
ISO 1183
Water Absorption 9.0 - 10 %
9.0 - 10 %
ISO 62
Moisture Absorption at Equilibrium 2.6 - 3.4 %
2.6 - 3.4 %
23°C/50% R.H.; ISO 62
Viscosity Measurement 145
145
Viscosity Number; ISO 307
Linear Mold Shrinkage 0.0055 cm/cm
0.0055 in/in
Melt Flow 197.75 g/10 min

@Load 5.00 kg,
Temperature 275 °C
197.75 g/10 min

@Load 11.0 lb,
Temperature 527 °F
ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength, Yield 90.0 MPa
13100 psi
50mm/min; ISO 527
Elongation at Yield 4.0 %
4.0 %
50mm/min; ISO 527
Modulus of Elasticity 3.40 GPa
493 ksi
ISO 527
Flexural Modulus 3.00 GPa
435 ksi
ISO 178
Izod Impact, Notched (ISO) 5.00 kJ/m²
2.38 ft-lb/in²
ISO 180/A
5.00 kJ/m²

@Temperature -30.0 °C
2.38 ft-lb/in²

@Temperature -22.0 °F
ISO 180/A
Charpy Impact Unnotched 25.0 J/cm²
119 ft-lb/in²
ISO 179/1eU
20.0 J/cm²

@Temperature -30.0 °C
95.2 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
Charpy Impact, Notched 0.400 J/cm²
1.90 ft-lb/in²
ISO 179/1eA
0.300 J/cm²

@Temperature -30.0 °C
1.43 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 70.0 - 100 µm/m-°C

@Temperature 23.0 - 80.0 °C
38.9 - 55.6 µin/in-°F

@Temperature 73.4 - 176 °F
ISO 11359-1/-2
Specific Heat Capacity 1.70 J/g-°C
0.406 BTU/lb-°F
Thermal Conductivity 0.330 W/m-K
2.29 BTU-in/hr-ft²-°F
DIN 52612
Melting Point 220 °C
428 °F
DIN 53765
Maximum Service Temperature, Air 87.0 °C
189 °F
for 50% loss of tensile strength after 20,000 hr
97.0 °C
207 °F
for 50% loss of tensile strength after 5,000 hr
180 °C
356 °F
Deflection Temperature at 0.46 MPa (66 psi) 180 °C
356 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 65.0 °C
149 °F
ISO 75
Flammability, UL94 V-2

@Thickness >=1.50 mm
V-2

@Thickness >=0.0591 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Dielectric Constant 3.3

@Frequency 1.00e+6 Hz
3.3

@Frequency 1.00e+6 Hz
IEC 60250
Dissipation Factor 0.030

@Frequency 1.00e+6 Hz
0.030

@Frequency 1.00e+6 Hz
IEC 60250
Comparative Tracking Index 600 V
600 V
Test Solution A; IEC 60112
Processing Properties Metric English Comments
Melt Temperature 250 - 270 °C
482 - 518 °F
Injection-molding/Extrusion
Mold Temperature 40.0 - 60.0 °C
104 - 140 °F
Injection-molding
Descriptive Properties Value Comments
Color BK00464
Commercial Status North America and Europe
Impact Modified No
Primary Processing Technique Injection Molding
Copyright © lookpolymers.com All Rights Reserved