Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Global EPP PA 66E Extruded Polyamide 66

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Extruded
Manufacturer Global EPP
Trade Name PA
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Global EPP PA 66E Extruded Polyamide 66.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Polyamides, commonly referred to as nylons, are macromolecular, partially crystalline thermoplastics. Their physical properties are mainly determined by the composition and structure of their molecular chains. Their combined strengths and characteristics position them as obvious first choice materials for all components, subject to structural and wear conditions, in mechanical and plant engineering environments.Key characteristics:Excellent sliding and wear propertiesPerfect balance of mechanical strength, toughness and rigidityGood electrical insulating propertiesVarious FDA compliant grades available.This grade is noted for its elevated mechanical strength, rigidity, abrasion and heat resistance. Its impact strength and vibration damping abilities are reduced when compared to PA 6, making this the preferred extruded grade for highly stressed, thermally loaded components.
Physical Properties Metric English Comments
Density 1.145 g/cc
0.04137 lb/in³
Test Method A; ISO 1183:1987
Water Absorption 0.30 %

@Temperature 23.0 °C,
Time 86400 sec
0.30 %

@Temperature 73.4 °F,
Time 24.0 hour
Immersion; ISO 62:1999 (modified)
Moisture Absorption at Equilibrium 2.7 %
2.7 %
50% RH; ISO 62:1999
Water Absorption at Saturation 8.5 %
8.5 %
ISO 62:1999
Mechanical Properties Metric English Comments
Hardness, Shore D 82
82
ISO 868:2003
Tensile Strength at Break 90.0 MPa
13100 psi
Sample Type 1B, 50mm/min; ISO 527-1/2:1993
Elongation at Break >= 30 %
>= 30 %
Sample Type 1B, 50 mm/min; ISO 527-1/2:1993
Modulus of Elasticity 3.70 GPa
537 ksi
Sample Type 1B, 50 mm/min; ISO 527-1/2:1993
Flexural Strength 100 MPa
14500 psi
1.5 mm/min; ISO 178:2001
Flexural Modulus 3.10 GPa
450 ksi
1.5 mm/min; ISO 178:2001
Compressive Strength 90.0 MPa
13100 psi
Sample Type B, 5 mm/min; ISO 604:2002
Compressive Modulus 3.20 GPa
464 ksi
Sample Type A, 1 mm/min; ISO 604:2002
Izod Impact, Notched (ISO) 5.70 kJ/m²
2.71 ft-lb/in²
Sample Type A; ISO 180:2000
Coefficient of Friction, Dynamic 0.25

@Pressure 1.75 MPa
0.25

@Pressure 254 psi
31.4 m/min
Limiting Pressure Velocity 0.100 MPa-m/sec
2860 psi-ft/min
Thermal Properties Metric English Comments
CTE, linear 100 µm/m-°C

@Temperature 23.0 - 55.0 °C
55.6 µin/in-°F

@Temperature 73.4 - 131 °F
ISO 11359-2:1999
Thermal Conductivity 0.230 W/m-K
1.60 BTU-in/hr-ft²-°F
ISO 8301:1991
Melting Point 260 °C
500 °F
Maximum Service Temperature, Air 100 °C
212 °F
Continuous
170 °C
338 °F
Intermittent
Deflection Temperature at 0.46 MPa (66 psi) 205 °C
401 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 100 °C
212 °F
ISO 75
Glass Transition Temp, Tg 72.0 °C
162 °F
ISO 11359-2:1999
Flammability, UL94 HB
HB
IEC 60695-11-10:2003-08
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093:1980-01
Surface Resistance 1.00e+12 ohm
1.00e+12 ohm
IEC 60093:1980-01
Dielectric Constant 3.6

@Frequency 1.00e+6 Hz
3.6

@Frequency 1.00e+6 Hz
IEC 60250:1969-01
4.3

@Frequency 100 Hz
4.3

@Frequency 100 Hz
IEC 60250:1969-01
Dielectric Strength 30.5 kV/mm
775 kV/in
IEC 60243-1:1998-01
Dissipation Factor 0.024

@Frequency 100 Hz
0.024

@Frequency 100 Hz
IEC 60250:1969-01
Comparative Tracking Index 600 V
600 V
IEC 60112:2003-01
Descriptive Properties Value Comments
Color Natural, Black
Copyright © lookpolymers.com All Rights Reserved