Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Lanxess Durethan® BM 240 H2.0 901510 Nylon 6, 40% Mineral

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Mineral Filled
Manufacturer Lanxess
Trade Name Durethan®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Lanxess Durethan® BM 240 H2.0 901510 Nylon 6, 40% Mineral.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PA 6, injection molding grade, 40% mineral, isotopic properties, good heat-ageing resistance
Physical Properties Metric English Comments
Density 1.46 g/cc
0.0527 lb/in³
ISO 1183
Water Absorption 6.0 %
6.0 %
Test Sim. to ISO 62
Moisture Absorption at Equilibrium 1.9 %
1.9 %
23°C/50% R.H.; Test Sim. to ISO 62
Viscosity Test 142 cm³/g
142 cm³/g
Viscosity number; ISO 307, 1157, 1628
Melt Flow 23 g/10 min

@Load 5.00 kg,
Temperature 260 °C
23 g/10 min

@Load 11.0 lb,
Temperature 500 °F
Calculated from MVR using melt density; ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength at Break 50.0 MPa
7250 psi
Conditioned; ISO 527-1/-2
85.0 MPa
12300 psi
ISO 527-1/-2
Elongation at Break 7.0 %
7.0 %
ISO 527-1/-2
40 %
40 %
Conditioned; ISO 527-1/-2
Tensile Modulus 2.20 GPa
319 ksi
Conditioned; ISO 527-1/-2
6.00 GPa
870 ksi
ISO 527-1/-2
Charpy Impact Unnotched 9.00 J/cm²

@Temperature -30.0 °C
42.8 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
9.00 J/cm²

@Temperature -30.0 °C
42.8 ft-lb/in²

@Temperature -22.0 °F
Conditioned; ISO 179/1eU
12.0 J/cm²

@Temperature 23.0 °C
57.1 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eU
NB

@Temperature 23.0 °C
NB

@Temperature 73.4 °F
Conditioned; ISO 179/1eU
Charpy Impact, Notched <= 1.00 J/cm²

@Temperature -30.0 °C
<= 4.76 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
<= 1.00 J/cm²

@Temperature -30.0 °C
<= 4.76 ft-lb/in²

@Temperature -22.0 °F
Conditioned; ISO 179/1eA
<= 1.00 J/cm²

@Temperature 23.0 °C
<= 4.76 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eA
1.20 J/cm²

@Temperature 23.0 °C
5.71 ft-lb/in²

@Temperature 73.4 °F
Conditioned; ISO 179/1eA
Impact 3052
3052
Puncture maximum force (N); ISO 6603-2
825

@Temperature -30.0 °C
825

@Temperature -22.0 °F
Puncture maximum force (N); ISO 6603-2
Puncture Energy 9.20 J
6.79 ft-lb
ISO 6603-2
1.60 J

@Temperature -30.0 °C
1.18 ft-lb

@Temperature -22.0 °F
ISO 6603-2
1.60 J

@Temperature -30.0 °C
1.18 ft-lb

@Temperature -22.0 °F
Conditioned; ISO 6603-2
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 60.0 µm/m-°C
33.3 µin/in-°F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 70.0 µm/m-°C
38.9 µin/in-°F
ISO 11359-1/-2
Melting Point 222 °C
432 °F
10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 190 °C
374 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 90.0 °C
194 °F
ISO 75-1/-2
Deflection Temperature at 8.0 MPa 50.0 °C
122 °F
ISO 75-1/-2
Vicat Softening Point 200 °C
392 °F
50°C/h 50N; ISO 306
Oxygen Index 26 %
26 %
ISO 4589-1/-2
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+11 ohm-cm
1.00e+11 ohm-cm
Conditioned; IEC 60093
1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+13 ohm
1.00e+13 ohm
IEC 60093
Dielectric Constant 4.0

@Frequency 1.00e+6 Hz
4.0

@Frequency 1.00e+6 Hz
IEC 60250
4.4

@Frequency 100 Hz
4.4

@Frequency 100 Hz
IEC 60250
4.7

@Frequency 1.00e+6 Hz
4.7

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
15

@Frequency 100 Hz
15

@Frequency 100 Hz
Conditioned; IEC 60250
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
38.0 kV/mm
965 kV/in
Conditioned; IEC 60243-1
Dissipation Factor 0.011

@Frequency 100 Hz
0.011

@Frequency 100 Hz
IEC 60250
0.015

@Frequency 1.00e+6 Hz
0.015

@Frequency 1.00e+6 Hz
IEC 60250
0.10

@Frequency 1.00e+6 Hz
0.10

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
0.25

@Frequency 100 Hz
0.25

@Frequency 100 Hz
Conditioned; IEC 60250
Comparative Tracking Index 525 V
525 V
IEC 60112
Descriptive Properties Value Comments
Additives Release agent
Features Heat stabilized or stable to heat
Form Pellets
ISO Shortname ISO 1874-PA 6,MHR,14-060,MD40
Processing Injection molding
Region Asia Pacific
Europe
Near East/Africa
North America
South and Central America
Copyright © lookpolymers.com All Rights Reserved