Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Schwartz Technical Plastics OPTAMID® Cast Polyamide 6, Conditioned

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Cast
Manufacturer Schwartz Technical Plastics
Trade Name OPTAMID®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Schwartz Technical Plastics OPTAMID® Cast Polyamide 6, Conditioned.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Application: deflection rope sheaves for elevatorsInformation provided by Schwartz Technical Plastics GmbH
Physical Properties Metric English Comments
Density 1.15 g/cc
0.0415 lb/in³
ISO R 1183
Moisture Absorption at Equilibrium 2.2 %
2.2 %
DIN 53473
Water Absorption at Saturation 7.0 %

@Temperature 20.0 °C
7.0 %

@Temperature 68.0 °F
ISO R 62
Mechanical Properties Metric English Comments
Ball Indentation Hardness 120 MPa
17400 psi
Hc 30; ISO 2039; partially
Tensile Strength, Yield 60.0 MPa
8700 psi
ISO-DIS 527
Creep Strength 11.0 MPa
1600 psi
1% elongation, 1000 h; DIN 53444
15.0 MPa
2180 psi
2% elongation, 1000 h; DIN 53444
Tensile Modulus 2.70 GPa
392 ksi
DIN 53457
Flexural Strength 55.0 MPa
7980 psi
DIN 54352
Flexural Modulus 2.40 GPa
348 ksi
DIN 53457
Izod Impact, Notched (ISO) >= 15.0 kJ/m²
>= 7.14 ft-lb/in²
DIN 53453
Izod Impact Resistance NB
NB
swinging hammer 0,1 DIN 51222; DIN 53453
Coefficient of Friction 0.080
0.080
With lubrication
Coefficient of Friction, Dynamic 0.42
0.42
no lube; Steel 2162, Rvst=2E-6m, p=0.05 Mpa, v=0.6 m/s, t=40°C
Tear Strength Test >= 0.25
>= 0.25
ISO-DIS 527
K Factor (Wear Factor) 9.00e-11
9.00e-11
Thermal Properties Metric English Comments
CTE, linear 70.0 - 80.0 µm/m-°C

@Temperature 20.0 - 100 °C
38.9 - 44.4 µin/in-°F

@Temperature 68.0 - 212 °F
DIN 53752
Specific Heat Capacity 1.67 J/g-°C
0.399 BTU/lb-°F
Thermal Conductivity 0.250 W/m-K
1.74 BTU-in/hr-ft²-°F
DIN 52612
Melting Point 220 °C
428 °F
ISO R 1218
Maximum Service Temperature, Air 120 °C
248 °F
Continuous
180 °C
356 °F
Intermittent
Deflection Temperature at 0.46 MPa (66 psi) 210 °C
410 °F
V-notch; ISO R 75
Deflection Temperature at 1.8 MPa (264 psi) 120 °C
248 °F
V-notch; ISO R 75
Minimum Service Temperature, Air -40.0 °C
-40.0 °F
Continuous
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
DIN 53482
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
DIN 53482
Dielectric Constant 3.7
3.7
DIN 53483
Dielectric Strength 20.0 kV/mm
508 kV/in
DIN 53481
Dielectric Loss Index 0.030
0.030
DIN 53483
Descriptive Properties Value Comments
Creepage/leakage Resistance KA3b
DIN 53480
Copyright © lookpolymers.com All Rights Reserved