Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Styron Magnumâ„¢ PG914 ABS, High Impact

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded
Manufacturer Styron
Trade Name Magnum™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Styron Magnumâ„¢ PG914 ABS, High Impact.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
MAGNUM ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resins are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming.MAGNUM PG914 and FG960 ABS resins are specifically designated for use as pipe and fittings for Drain, Waste and Vent applications which meet ASTM D-2661 DWV, D2750 Conduit, D2751 Sewer, F-480 Well Casing and F-628 Cellular Core DWV standards. MAGNUM PG960 and FG914 are listed under standard 14 of the National Sanitation Foundation.MAGNUM PG914 ABS resin is a low gloss, high impact strength thermoplastic resin. Sold as prime, virgin material, it is used as a blending resin in the pipe extrusion markets for drains and vents.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.
Physical Properties Metric English Comments
Density 1.04 g/cc
0.0376 lb/in³
ASTM Data
Linear Mold Shrinkage 0.0055 cm/cm
0.0055 in/in
Melt Flow 2.6 g/10 min

@Load 3.80 kg,
Temperature 230 °C
2.6 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM Data
Mechanical Properties Metric English Comments
Tensile Strength, Yield 37.9 MPa
5500 psi
ASTM Data
Elongation at Break 50 %
50 %
ASTM Data
Elongation at Yield 2.6 %
2.6 %
ISO Data
Tensile Modulus 1.93 GPa
280 ksi
ASTM Data
Izod Impact, Notched 1.92 J/cm
3.60 ft-lb/in
ASTM Data
Charpy Impact Unnotched NB
NB
ISO Data
NB
NB
ISO Data, Low Temp
Charpy Impact, Notched 0.900 J/cm²
4.28 ft-lb/in²
ISO Data, Low Temp
2.20 J/cm²
10.5 ft-lb/in²
ISO Data
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 79.0 µm/m-°C

@Temperature 20.0 °C
43.9 µin/in-°F

@Temperature 68.0 °F
ISO data
Deflection Temperature at 1.8 MPa (264 psi) 102 °C
216 °F
Annealed; ASTM Data
Vicat Softening Point 107 °C
225 °F
Copyright © lookpolymers.com All Rights Reserved