- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced
- Ashley Polymers Ashlene® 520 Nylon 66
Ashley Polymers Ashlene® 520 Nylon 66
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced |
| Manufacturer | Ashley Polymers |
| Trade Name | Ashlene® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ashley Polymers Ashlene® 520 Nylon 66.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A general purpose basic Nylon 66 resin, slightly lubricated.Data provided by the manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
| Water Absorption | 1.5 % | 1.5 % | ASTM D570 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 117 | 117 | ASTM D785 |
| Tensile Strength, Ultimate | 75.8 MPa | 11000 psi | ATSM D638 |
| Elongation at Break | 30 % | 30 % | ASTM D638 |
| Elongation at Yield | 4.0 % | 4.0 % | ASTM D638 |
| Flexural Modulus | 2.60 GPa | 377 ksi | ASTM D790 |
| Izod Impact, Notched | 0.530 J/cm | 0.993 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 254 °C | 489 °F | ASTM D3418 |
| Deflection Temperature at 0.46 MPa (66 psi) | 203 °C | 397 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 83.0 °C | 181 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.9 @Frequency 1e+6 Hz |
3.9 @Frequency 1e+6 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
- RheTech Products P256-00 Polypropylene Copolymer, Natural
- 3M Dyneon™ Fluorel™ FC-2230 Fluoroelastomer VF2 + HFP Dipolymer (discontinued **)
- DSM Akulon® Ultraflow™ K-FHGM24 Nylon 6-30% Glass and Mineral Reinforced (European Grade) (Dry) (discontinued
- Solvay TECHNYLSTARâ„¢ SX 216 V50 PA6, 50% glass filled, Conditioned
- Williams Advanced Alloys C117 Solder
- A. Schulman LP552-01 Injection Molding, Extrusion Grade Compound
- Zircar Refractory Composites ASPA-2 Alumina-Silica Fiber Paper
- Cadi Cu-Tungsten (55%) Copper Alloy
- ATI Allegheny Ludlum Martensitic Stainless Steel Type 420, Hardened + 538°C Temper
- 3M 32664 Light Gray Heavy Duty Performance Coating - Part B
Copyright © lookpolymers.com All Rights Reserved