POLYMER SEARCH

Murtfeldt Murdopol® Nylon 12

Category	Polymer , Thermoplastic , Nylon , Nylon 12 , Nylon 12, Cast
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murdopol®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murdopol® Nylon 12.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Murdopol® has extremely high shock and impact resistance characteristics and good emergency running characteristics thanks to its high wear resistance. The main advantage of this material is its fantastic ability to create firm plastic/metal connections.Special Properties:• Good shock and impact resistance• Low residual stress• Metal core surrounded by cast plastic available• Good damping and vibration behavior• Lowest moisture absorption of all polyamides• Good resistance to chemicals• Dimensionally stableInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.03 g/cc	0.0372 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.90 % @Temperature 23.0 °C	0.90 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	1.4 % @Temperature 23.0 °C	1.4 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	78	78	DIN 53505
Tensile Strength, Yield	55.0 MPa	7980 psi	dry; ISO 527-1
	55.0 MPa	7980 psi	50% RH; ISO 527-1
Elongation at Break	200 %	200 %	dry; ISO 527-1
	200 %	200 %	50% RH; ISO 527-1
Modulus of Elasticity	2.00 GPa	290 ksi	dry
	2.00 GPa	290 ksi	50% RH
Charpy Impact Unnotched	NB	NB	ISO 179
Charpy Impact, Notched	2.00 J/cm²	9.52 ft-lb/in²	dry; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.35	0.35
Sand Slurry	0.80	0.80	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	100 µm/m-°C @Temperature 23.0 - 60.0 °C	55.6 µin/in-°F @Temperature 73.4 - 140 °F
	120 µm/m-°C @Temperature 23.0 - 100 °C	66.7 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.230 W/m-K	1.60 BTU-in/hr-ft²-°F
Melting Point	180 °C	356 °F	ISO 11357-1
Maximum Service Temperature, Air	120 °C @Time 1.80e+7 sec	248 °F @Time 5000 hour
	150 °C @Time <=86400 sec	302 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-60.0 °C	-76.0 °F
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+12 ohm-cm	>= 1.00e+12 ohm-cm	50% RH; IEC 60093
	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	dry; IEC 60093
Surface Resistance	>= 1.00e+12 ohm	>= 1.00e+12 ohm	50% RH; IEC 60093
	>= 1.00e+13 ohm	>= 1.00e+13 ohm	dry; IEC 60093
Dielectric Constant	3.5 @Frequency 100 Hz	3.5 @Frequency 100 Hz	dry; IEC 60250
Dielectric Strength	20.0 kV/mm	508 kV/in	50% RH; IEC 60243-1
	50.0 kV/mm	1270 kV/in	dry; IEC 60243-1
Dielectric Loss Index	0.038 @Frequency 100 Hz	0.038 @Frequency 100 Hz	dry; IEC 60250

Compliance Properties	Metric	English	Comments
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Natural

Users viewing this material also viewed the following: