- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Toyobo T-750 Nylon, Painting Grade
Toyobo T-750 Nylon, Painting Grade
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Toyobo |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Toyobo T-750 Nylon, Painting Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Key Feature: Glass fiber and mineral reinforced, high heat distortion gradesInformation provided by Toyobo Co., Ltd
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.45 g/cc | 0.0524 lb/in³ | ASTM D792 |
| Water Absorption | 0.70 % | 0.70 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 cm/cm @Thickness 3.00 mm |
0.0030 in/in @Thickness 0.118 in |
|
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm @Thickness 3.00 mm |
0.0080 in/in @Thickness 0.118 in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength, Ultimate | 123 MPa | 17800 psi | ASTM D638 |
| Elongation at Break | 3.8 % | 3.8 % | ASTM D638 |
| Modulus of Elasticity | 7.20 GPa | 1040 ksi | ASTM D638 |
| Flexural Yield Strength | 183 MPa | 26500 psi | ASTM D790 |
| Flexural Modulus | 7.20 GPa | 1040 ksi | ASTM D790 |
| Izod Impact, Notched | 1.20 J/cm | 2.25 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 43.0 µm/m-°C @Temperature 20.0 °C |
23.9 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 217 °C | 423 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 203 °C | 397 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | unregistered |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Strength | 22.0 kV/mm @Thickness 2.00 mm |
559 kV/in @Thickness 0.0787 in |
ASTM D149 |
| Arc Resistance | 120 sec | 120 sec | ASTM D495 |
Users viewing this material also viewed the following:
- Multibase Nylex™ 2185 HF Polyamide + PP
- Honeywell Aegisâ„¢ H100MP Nylon 6 Extrusion Grade Homopolymer Film
- Sekisui PIOCELAN TOPF-40DB Flame Retardant Moldable Polymer Foam
- Goodfellow Nioro® Gold 82/Nickel 18 Alloy
- A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer
- Dow Corning XIAMETER® PMCPMEM-1101 Emulsion
- Bulk Molding Compounds BMC 5592 Arc, Track, and Weather Resistant Polyester
- Samyang Triel® 5550 Thermoplastics Polyetherester Elastomer, General Extrusion
Copyright © lookpolymers.com All Rights Reserved