Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
PolyOne OnFlex™ BIO 5380A-E0006 Thermoplastic Elastomer (TPE) OnFlex™ BIO 5300 series thermoplastic elastomer compounds are soft thermoplastic polyurethane compounds made from renewable natural sources. These compounds contain at least 20% of renewable materi.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
Nylene® PA6/6 Impact Modified 4114 HS Nylon 6/6 High Impact Grade; Property data for dry as molded samples.ALM, Nylene Canada, and Custom Resins are all operting companies of Polymeric Resources Corporation. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
SABIC Innovative Plastics GELOY CR8510 ASA ASA with outstanding UV exposure performance for both exterior and interior applications. F1 Rated. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
SABIC Innovative Plastics GELOY CR8510 ASA (Asia Pacific) ASA with outstanding UV exposure performance for both exterior and interior applications. F1 Rated. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
SABIC Innovative Plastics GELOY INP388 ASA+AMSAN SABIC INP388 is a high heat ASA resin, and is based on alphamethyl styrene acrylontrile butylacrylate styrene (AMS-ASA) and polybutyl arylate rubber. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Polymer Resources NY66-IM2-[color]H Nylon, Superior Impact Modified, Heat Stabilized (DAM) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).Information provide.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
PTS SAN-80HF High Flow SAN Resin Information provided by Polymer Technology and Services, LLC (PTS). |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
Ineos ABS LUSTROPAK® 1010 ABS, Extrusion Grade
(discontinued **) Extrusion grade, high stiffness.Applications: Food containers.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Huntsman KRYSTALFLEX® PE 499 Polyurethane Optical Aliphatic Film Key Properties:Moisture ResistanceChemical CompatibilityCooler ProcessingHigher AdhesionMultiple Design OptionNo special storage requiredInformation provided by Alliance Polymers |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
LATI Latamid SP1 PA 6.10 Polyamide 6.10 (PA6.10). Unfilled. Low moisture absorption.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Termoplastici .. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183/A |
Solvay TECHNYL® A 258 PA Black 2N PA66, DRY Description: Unreinforced and modified polyamide 66, UV and thermal stabilized with excellent impact resistance, for injection molding.Available in: Europe Product Applications: TECHNYL® A 258P1 .. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Techmer ES Electrafil® PS-31/EC BK Polystyrene, Electrically Conductive Carbon Black |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON SE003 PA 12 LNP* STAT-KON* SE003 is a compound based on Nylon 12 resin containing 15% Carbon Fiber. Added feature of this material is: Electrically Conductive. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
Styrolution Luran® S 778 UV Colored ASA Description: Injection molding grade with enhanced toughness and resistance to heat distortion. Especially suitable for exterior automotive components (e.g. radiator grills, rear end appliqué pan.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL GTX GTX944 PPE+PA (Europe-Africa-Middle East) NORYL GTX944 is an unfilled GTX grade with improved processability and increased impact performance. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
Styrolution Novodur® 5300 ABS Novodur 5300 is a high heat injection molding grade with high impact strength, good chemical resistance and reduced emission (PC modified)Information provided by Styrolution |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Tipco Tipcolene® FPT 20 - 20% Talc Reinforced Polypropylene Homopolymer Compound 20% Talc Reinforced PP HomopolymerApplications: General PurposeProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
Borealis Daplen™ EE260AE Scratch Resistant Polypropylene Compound Daplen EE206AE is a 20% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen EE206AE is optimized to provide excellent scratch resistance on gained and unpai.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
Loctite® PRISM® 411 Clear Instant Adhesive Cyanoacrylate Bonding AdhesivesLoctite® technology has made the productivity promises of cyanoacrylate adhesives a reality with the industry's widest selection of high-performance, application-.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
DSM Akulon® K223-TP4 Impact Modified Nylon 6 (European and Asian Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | dry; ISO 1183 |
DSM Novamid® ST120 NAT PA6-I Impact Modified, Injection Molding |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | dry; ISO 1183 |
DSM Novamid® ST220 NAT PA6-I Impact Modified, Injection Molding, Medium Viscosity |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
ExxonMobil Mytex™ AS65KW-LGDC Talc filled compounded polypropylene produced for automotive interior applicationsInformation provided by ExxonMobil Chemical |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
Eurostar Staramide AST44 PA66, Impact Modified, Injection Molded AST44 is a Low Temperature Impact Modified Polyamide 66 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
Arkema Group ORGASOL® 3501 EXD Nat 1 Copolyamide 6/12 Information provided by Arkema Group |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | |
Arkema Group Rilsan® AESN G9 T6L Nylon 12, Graphite Filled (Conditioned) Designation ISO 1874-PA12,EHLS,22-010,CD10Rigid grade with graphite fillers for extrusion. Available color: steel gray. Reinforced light and heat stabilizing agents.Very low friction coefficient. No.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 |
BASF Ultramid® 8350 HS PA6 (Dry) Ultramid 8350 HS is a heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate.. |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® PB261WO PPO A general purpose flame retardant resin for injection molding.Data provided by the manufacturer |
|||
Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
Chem Polymer Chemlon 109 Nylon 66, High Impact A highly impact-modified, lubricated nylon 66 exhibiting excellent toughness, especially at lower temperatures.Data provided by the manufacturer, Chem Polymer. |