Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.21 g/cc | 0.0437 lb/in³ | |
Plastcom SLOVAMID 66 GF 20 HI PA66, 20% glass beads FeaturesChemically reinforced with 20% glass beeds, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. I.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Colorcomp D10009 PC LNP* Colorcomp* D10009 is a compound based on Polycarbonate resin containing Flame Retardant, Unfilled Custom Color. Added features of this material include: Flame Retardant.This data was supplied .. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP COLORCOMP DX98735H PC LNP* COLORCOMP* DX98735H is an unfilled Polycarbonate resin. Added feature of this grade is: Healthcare. |
|||
Density | 1.21 - 1.54 g/cc | 0.0437 - 0.0556 lb/in³ | Average value: 1.35 g/cc Grade Count:20 |
Overview of materials for Nylon 66, Glass/Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass/Carbon Fiber Filled". Each property range of values reported is minimum and maximum valu.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Global GPC-105-S Enhanced Modulus, Structural Grade Polycarbonate Information provided by Global Polymers Corporation. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 2781 |
Huntsman AVALON® 70 AE Thermoplastic Polyurethane Introduction: AVALON 70 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 70 AE is part of the AVALON Soft Range and offers a premium soiling material .. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 2781 |
Huntsman AVALON® 90 AHT DP Thermoplastic Polyurethane Performance Features: AVALON® injection molding products are trusted worldwide to deliver:Outstanding flex performanceExcellent slip resistancePerfect surface definitionTransparency and transluce.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 2781 |
Huntsman AVALON® 90 AKU Thermoplastic Polyurethane Introduction: AVALON 90 AKU is a part of the AVALON Crystal Range and offers a specially designed, flexible material wit a higher degree of transparency compared with conventional TPU at the same ha.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP TX97446 PU LNP* LUBRICOMP* TX97446 is a compound based on Polyurethane containing Proprietary Fillers. Added feature of this material is: Wear Resistant. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Ultem ATX100R PEI (Europe-Africa-Middle East) Higher impact, high flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 HB Listing.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Techmer ES Electrafil® PC-50/EC Polycarbonate, Conductive Carbon Filled Conductive Carbon, Powder Modified |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Xenoy® HX6600HP PBT+PC Xenoy HX6600HP is PBT based semi-crystalline blend with balanced flow and impact properties. Improved chemical resistance against lab disinfectants and chemicals for healthcare enclosure and housing.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP STAT-LOY A30009 ABS (Asia Pacific) LNP* Stat-loy* A30009 is a compound based on Acrylonitrile Butadiene Styrene resin containing Flame Retardant. Added features of this material include: Antistat, Flame Retardant. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
Stir SpA CT 70 ATC (PVC) Application: Tread, pure plasticInformation provided by STIR SpA |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOTUF VF004S SUPER TOUGH NYLON (Europe-Africa-Middle East) LNP* THERMOTUF* VF004S is a compound based on Super Tough Nylon resin containing Glass Fiber. Added features of this material include: Heat Stabilized. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Techmer ES HiFill FR® PC FR SFX-GREEN 1.0 Availability: North AmericaForms: PelletsAdditive: UV StabilizerFeatures: Flame RetardantAppearance: GreenInformation provided by TP Composites, Inc. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Lubrizol Pellethane® 2363-75D Thermoplastic Polyurethane Elastomer Feature: USP Class VIAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Unitika P-1001 Engineering Plastic P series resins are resins succeeding the characteristics of the neat polymer, U100, and improved in flowability and optical properties. Among many super engineering plastics, the resins are few tra.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Wanhua Chemical Wanthane® WHT-1295B Polyester Based TPU Good mechanical properties, good extrusion stability, low costInformation provided by Wanhua Chemical Group Co., Ltd. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Tipco Tipcolene® FPT 40 NEX - 40% Talc Reinforced Polypropylene Homopolymer, Low MFI 40% Talc Reinforced PP HomopolymerApplications: Sheets, Pipes, ProfilesProcessing: ExtrusionInformation provided by the Manufacturer, Tipco Industries Ltd.,
India. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
Covestro Desmopan® DP 1080A Polyurethane injection molding gradefree from plasticizershard - soft systemsTechnical partsAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covest.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ISO 1183 |
DSM Stanyl® TE373 Nylon 46 (European and Asian Grade) (Dry) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | |
DuPont Performance Polymers Zytel® 70G30L NC010 Nylon 66
(Unverified Data**) 30% Glass Reinforced Polyamide 66Zytel 70G30L NC010 is a 30% glass fiber reinforced polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
Density | 1.21 - 1.25 g/cc | 0.0437 - 0.0452 lb/in³ | ISO R 1183 |
Fainplast Compounds PH 75/C Flexible PVC, Transparent Extrusion Profiles, UL 94 Class V1 |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Aclo Acculoy POL063L Polycarbonate PET Alloy |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Copolymer CP0436C40L Calcium Reinforced |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
BASF Elastollan® S80A Polyester Type Polyurethane Elastomer Processed by extrusion or injection molding. Elastollan S series of products are polyester-based thermoplastic polyurethanes that exhibit good hydrolytic stability. They also exhibit good oil, fue.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | Silicone Property; Arlon SQA-TMS-024 |
Arlon 47568R0055E 0.0075" (0.190 mm) Cured Silicone Rubber/Acrylic PSA Design/Construction: Side 1: Cured Silicone Rubber Substrate: Style 2113 FiberglassSide 2: Acrylic PSA Interleave: Polypropylene This data represents typical values for the production material. The.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | ASTM D792 |
Albis Plastics Cellulose Acetate Butyrate B9424-3 , 3% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Density | 1.21 g/cc | 0.0437 lb/in³ | GB/1033 |
Zhejiang Juner PC/ABSz-4 Alloy Applications: Shell of Small Household Electric ApplianceInformation provided by Zhejiang Juner New Materials Co, Ltd. |