Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
DuPont Performance Polymers Rynite® RE19051 BK507 PET
(Unverified Data**) Rynite® RE19051 BK507 is a 40% glass and mineral reinforced, flame retardant, polyethylene terephthalate black resin.Information provided by DuPont Performance Polymers |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Rostone Rosite® 4950BS SMC Thermoset Polyester, 10% Glass Reinforced
(discontinued **) Key Features: Low Shrink; Tight DimensionsRemarkable physical and electrical strength combined with excellent dimensional stability. Information provided by Oneida-Rostone Group. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | |
LATI Kelon® B FR H2 CEG/500-V0CT3 PA 6, Glass/Mineral Reinforced, Flame Retardant, Heat Stabilized Polyamide 6 (PA6) based compound. Heat stabilized. Glass fibers / Mineral filler. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE and antimony trioxide free. Low thermal expansion co.. |
|||
Density | 1.73 - 1.78 g/cc @Temperature 22.0 - 24.0 °C |
0.0625 - 0.0643 lb/in³ @Temperature 71.6 - 75.2 °F |
|
Shandong Dongyue Shenzhou New Material Co Fluorocarbon Solvent Conformable with: Q/DYS 012-2007Fluorocarbon solvent is a mixture of perfluorocarbon circular ether. It is a colorless transparent liquid, odorless, nontoxic and uninflammable. It is unsoluble in .. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP 2X98703 ETFE LNP* THERMOCOMP* 2X98703 is a compound based on ETFE Copolymer resin containint Proprietary Filler(s). |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D 792 |
SABIC Innovative Plastics LNP Thermocomp 2C003 LNP* Thermocomp* 2C003 is a compound based on Ethylene Tetrafluoroethylene Copolymer resin containing Carbon Fiber. Added features of this material include: Electrically Conductive.This data was su.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP 2C003 ETFE LNP* THERMOCOMP* 2C003 is a compound based on ETFE resin containing 15% Carbon Fiber. Added features of this material include: Electrically Conductive. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America 2-530 Short-Glass Reinforced Diallyl Phthalate Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Information provided by Sumitomo Bak North Am.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America E 7459A Long Glass Fiber Reinforced Epoxy EM 7459A is a medium strength fiberglass reinforced epoxy molding compound, which features enhanced impact strength and toughness.Information provided by Sumitomo Bak North America, Inc. |
|||
Density | 1.73 - 1.88 g/cc | 0.0626 - 0.0678 lb/in³ | |
Saint-Gobain Chemfab® 1584N PTFE Coated Fiberglass Conveyor Belting Description: General Notes on Saint Gobain Belting Products:Saint Gobain Performance Plastics developed its belting materials for applications that require superior release characteristics, permeabi.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Verton OV00A PPS (Asia Pacific) LNP* Verton* OV00A is a compound based on Polyphenylene Sulfide resin containing Long Glass Fiber.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
ScanTube ETFE Tubing Information provided by ScanTube, Inc. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Plenco 6015 Phenolic, Briquette, Injection Molded PLENCO 06015 is a glass and mineral filled phenolic molding compound offering improved mechanical strength, dimensional stability and excellent electrical properties. 06015 is available in black.Inf.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Plenco 6343 Phenolic, Granular, Transfer Molded PLENCO 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recogniz.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
Unitika E-RUNG60 PA66, 60% Glass Fiber Reinforced, Conditioned Information provided by Unitika Ltd. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Plenco 6343 Phenolic, Granular, Compression Molded PLENCO 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recogniz.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
Polyplastics Duranex® 702MS Polybutylene Terephthalate (PBT), Higher gloss, Better surface appearance, GF filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
DuPont Performance Polymers Rynite® RE19051 BK507 Polyethylene Terephthalate (PET) 40% Glass/Mineral Reinforced Flame Retardant Polyethylene Terephthalate Rynite RE19051 BK507 is a 40% glass and mineral reinforced flame retardant polyethylene terephthalate black resin.Information .. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
BASF Ultradur B 4040 G10 BK5110 50% Glass Filled PBT Injection-molding grades containing 50% of glass fibers, for industrial parts with excellent surface quality.Applications: External door handles in vehicles, visible sunroof frames, over door handle.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
BASF Ultradur® B 4040 G10 50% Glass Filled BK 15029 PBT + PET Description: Injection molding grade with 50% glass fibers for industrial parts with excellent surface quality, for example external door handles in vehicles, visible sunroof frames, oven door handl.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Plenco 50130 PET, Pellet, Injection Molded, Black
(discontinued **) PLENCO 50130 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for good physical strength. It is UL listed and available in natural and black.Informat.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America FS-80-P-1 Long-Glass Reinforced Diallyl Phthalate Isophthalate DAP Resin Isomer. Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Meets the requirements of ASTM D5948 Type GI.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America RX® 1-501AN Mineral Filled Diallyl Phthalate Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Information provided by Sumitomo Bak North Americ.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Verton OV00A PPS LNP* Verton* OV00A is a compound based on Polyphenylene Sulfide resin containing Long Glass Fiber.This data was supplied by SABIC-IP for the Americas region. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
BASF Ultradur® B 4300 G10 50% Glass Filled PBT Description: Injection-molding grades containing 50% of glass fibers, for industrial parts, rigid, tough and dimensionally stable, for example for program switches, thermostat parts, small-motor hou.. |
|||
Density | 1.73 g/cc | 0.0625 lb/in³ | ISO 1183 |
Hexion Bakelite™ PF 1142 Phenolic Formaldehyde Resin, High Mechanical Strength
(discontinued **) Phenolic molding compound, inorganically filled, glass fiber reinforced, high dimensional stability, good mechanical properties.Application areas: Insulating flanges, sealings, pulleys.Information p.. |