Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 15.2 MPa @Temperature 23.0 °C |
2200 psi @Temperature 73.4 °F |
Die C2 hr; ASTM D412 |
PolyOne OnFlex™ HFFR 320-01 Thermoplastic Elastomer (TPE) OnFlex™ HFFR 320-01 is a non-halogen flame retardant material designed for flexible power cord insulation and cable jackets. New Product. Commercial specifications have not been established. - Non-.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R132BE Polyvinyl Chloride + NBR (PVC+NBR) Information provided by PolyOne |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R208AE Polyvinyl Chloride + NBR (PVC+NBR) Information provided by PolyOne |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R9788A Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible 83700 Polyvinyl Chloride, Flexible (PVC, Flexible) Automotive OEM approval(s).Information provided by PolyOne |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D4894 |
3M Dyneon™ CCM605 PTFE, 25% Glass Filled
(discontinued **) Type II, free flowing.Typical Applications: Finished or semi-finished parts: sheets, rods, tubes, billets for skiving of films or machining into complex shapes.Information provided by the Dyneon div.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
LyondellBasell Petrothene® GA808091 Linear Low Density Polyethylene ApplicationsPETROTHENE GA 808-091 is a broad molecular weight, linear low density polyethylene resin designed for use as a base resin in wire and cable jacketing. An antioxidant package is added to.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
LyondellBasell Petrothene® GA808093 Linear Low Density Polyethylene ApplicationsPETROTHENE GA 808-093 is a broad molecular weight, linear low density polyethylene resin designed for use as a wire and cable insulation. An antioxidant package is added to ensure therm.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
LyondellBasell Petrothene® NA324009 Low Density Polyethylene (Blow Molding Applications) ApplicationsPETROTHENE NA 324-009 is a low density homopolymer resin intended for blow molding applications. NA 324-009 provides good clarity, toughness and processability. Typical applications in.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
LyondellBasell Purell® PE3020D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrusion Blow Molding Purell PE 3020 D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. Target markets are small blow molding including packagi.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D1414 |
Greene Tweed CHEMRAZ® E38 Perfluoroelastomer Chemraz® E38 was specifically developed for high-density plasma systems and diffusion processes where seal reliability and very minimal contamination are essential. The material provides excelle.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | |
Taiwan PU Corporation CPU-69-A/B Mixing Ratio 100/42 Polyurethane Casting Elastomer Compound of CPU-69-A/B with a mixing ratio of 100/42.Information provided by Taiwan PU Corporation.MatWeb has a separate entry for the unmixed A nd B components. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ISO R 527 |
Stir SpA SR 90 CZ (PVC) Application: Extrusion insulation CEI 20-11 type TI-1Information provided by STIR SpA |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
Teknor Apex APEX® 3310-80NT Polyvinyl Chloride, Flexible Features: DEHP Plasticizer; Ethylene Oxide Sterilizable Uses: Food Service Applications; Medical/Healthcare Applications; Tubing Processing Forms: Extrusion Forms: PelletsInformation Provided by Tek.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex MF 569 Polyvinyl Chloride, Flexible Film Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Film, Medical Applications Forms-PelletsInformation provided by Teknor Apex Company |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex Monprene® MP-2100 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
Teknor Apex APEX® 03-A0673C-85 Polyvinyl Chloride, Flexible Notes: 75°C Jacket; RoHS CompliantFeatures: Low Temperature Flexibility Uses: Wire Jacketing; Wire and Cable Applications Agency Ratings: UL 719Forms: Pellets Wire Types: NMB; NMProcessing Method.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
Teknor Apex APEX® 130-Y Polyvinyl Chloride, Flexible Notes: 60°C Jacket; RoHS Compliant Uses: Cable Jacketing; Wire Jacketing; Wire and Cable ApplicationsForms: Pellets Agency Ratings: UL QMTT2 .E73402Information Provided by Teknor Apex |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex Telcar® TL-1000-95 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex Telcar® TL-88-N809C Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex Uniprene® UN-2678C Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D638 |
Americas Styrenics STYRON A-TECH® 1290 High Impact Polystyrene Product CharacteristicsEasy processingGood impact resistanceESCRFood Contact CompliantUL Classification 94HBTypical ApplicationsCreamer and yot containersExtrusion/ thermoformingInformation provided.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | Press Cure 5 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FC 2182 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FC 2182 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FT 2481 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FT 2481 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex Monprene® MP-1878 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 15.2 MPa | 2200 psi | |
3M MW Heat Shrink Tubing 3M Heat Shrink Tubing MW is a semi-rigid, 110°C heat-shrinkable polyolefin tubing that is a co-extruded and selectively cross-linked to provide an integral, meltable inner wall. When heated in exce.. |