Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D-1525 |
Plaskolite Optix® CA - 41 UVA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
Plaskolite Optix® CA-41 General Purpose Acrylic Resin Injection Molding Grade Pellets only. Lowest Heat Resistance and maximum flow. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D-1525 |
Plaskolite Optix® CP - 41 UVA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | 50 N - 50°C/h; ISO 306/B |
Polimeri Europa Edistir RK 451G Polystyrene UL94 V-0, polybromobiphenylether (PBBE) free, flame retarded, high impact polystyrene. This grade combines medium flow, heat resistance and good light stability for injection moulding of technical p.. |
|||
Vicat Softening Point | 90.0 °C @Load 1.00 kg |
194 °F @Load 2.20 lb |
ISO 306/A |
Polimeri Europa Riblene® FL 20 Low Density Polyethylene - Blown Film Extrusion Riblene FL 20 is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FL 20 is characterized by a good balance between processability and mechanical properties.Films manufac.. |
|||
Vicat Softening Point | 90.0 °C @Load 5.001 kg |
194 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYabs V0E ABS, Flame Retardant Information provided by Polykemi AB |
|||
Vicat Softening Point | 90.0 °C | 194 °F | 50°C/hr; 50N |
Polimeri Europa EDISTIR PD RK5512G High Impact Polystyrene (HIPS)
(discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,M,088-06-07-23 UL94 V-2, polybromobiphenylether (PBBE) free, high impact polystyrene with good mechanical and thermal pr.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics GELOY CR7520 ASA General purpose ASA. Excellent weatherability, good flow/aesthetics and high impact. Rated F2 by UL. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | 50°C/hr; 50N |
Polimeri Europa EDISTIR RK0414 High Impact Polystyrene (HIPS)
(discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,M,088-03-04-23 UL94 V-0, polybromobiphenylether (PBBE) free, flame retarded high impact polystyrene with excellent light .. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | Softening Point, R&B; ASTM E-28 |
ExxonMobil Escorene® LD-737 EVA Copolymer for Specialty Applications
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A 19.5% vinyl acetate copolymer.Applications: Compound viscosity modifier; High flow applications. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
Huntsman PE1356 EVA Film Extrusion
(discontinued **) 3.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
Huntsman PE 1402 EVA Film Extrusion
(discontinued **) 4% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
LyondellBasell Petrothene® NA951080 Low Density Polyethylene ApplicationsPETROTHENE NA 951-080 is designed for use as a base resin for compounding material including gas-injected or chemically expanded insulation. NA 951-080 is a natural, low density, medium.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
LG Chemical SEETEC BC500 LDPE Good Processability and Good electrical properties. Main Application: Cable insulationCAS No. 9002-88-4Information provided by LG Chemical |
|||
Vicat Softening Point | 90.0 °C @Load 5.00 kg |
194 °F @Load 11.0 lb |
50°C/h; ASTM D1525 |
LG Chemical TR300 MABS, Flame Retardant, Transparency Feature: Injection Molding, Flame Retardant, TransparencyApplication: Electric/Electronic Applications (TV, Monitor Housing) IT/OA deviceCAS No. 9010-94-0 and 25713-60-4Information provided by LG Ch.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ISO 306B |
Lucite International Diakon® CLG340 Acrylic Polymer Information provided by Lucite International |
|||
Vicat Softening Point | <= 90.0 °C | <= 194 °F | |
Sibur ABS 1530 Molding Grade ABS Plastic Thermal resistance with higher fluidity for large and thin wall articles. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
SK Chemicals SKYTHANE® 185A R series Polyurethane SKYTHANE is a thermoplastic polyurethane elastomer (TPU). Like materials ranging from rubber to plastics, it has excellent physical properties such as anti-abrasion, oil-resistance and mechanical pr.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
Lubrizol Estane® X-590A-2FR Thermoplastic Polyurethane Type: Estane® X-590A-2FR TPU is a Shore 89A, polyester type thermoplastic polyurethane elastomer.Uses: Film Blowing, Extrusion.Available in AsiaInformation Provided by The Lubrizol Corporation |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
ExxonMobil LD 144.50 Packaging Film Resin Film made from LD 144.50 offers improved impact strength and heat sealability compared to homopolymer clarity film resins. Typically applications include food packaging, frozen food packaging, and .. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | Rate A, Loading 1 (10 N); ASTM D1525 |
Entec Hypel® PELD20/.920 LDPE Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente.. |
|||
Vicat Softening Point | 90.0 °C @Load 1.00 kg, Thickness 3.17 mm |
194 °F @Load 2.20 lb, Thickness 0.125 in |
ASTM D1525 |
Diamond Polymers SBS 1001 Styrene Butadiene Block Copolymer Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | B50 (50N); ISO 306 |
Domo 1102M Polypropylene Homopolymer Information provided by Domo. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | |
BASF Polystyrol® 476 L Impact Grade Polystyrene (Europe) Normal flowing, high-impact grade. When extruded it is often mixed with PS 165 H.Data was collected by ISO methods and provided by BASF. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ISO 306 |
Arkema Group OREVAC® 18365 Maleic Anhydride Modified Polyethylene OREVAC® 18365 is anhydride modified polyethylene. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. OREVAC® 1.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | B |
Plastcom SLOVALEN PC 91 T 30 PP, 30% mineral filling FeaturesModified copolymer PP for injection moulding with the content of 30% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | 10N (T° increase = 50°C/h); ISO 306A50 |
Total Lacqrene® 6631 Impact Polystyrene
(discontinued **) LACQRENE® 6630 and 6631 are easy flowing, high impact polystyrenes for injection molding. With easy processing, good rigidity and ease of coloration. These grades find a wide range of application.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
LyondellBasell Petrothene® NA940000 Low Density Polyethylene (Film Grade) ApplicationsPETROTHENE NA 940 is a series of resins designed for heavy duty film applications. Superior puncture resistance combined with excellent impact properties make NA 940 an ideal choice for.. |
|||
Vicat Softening Point | 90.0 °C | 194 °F | ASTM D1525 |
Huntsman PE1353 EVA Film Extrusion
(discontinued **) 3.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |