Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Cycoloy® CP8930 PC+ABS High heat, PC/ABS for automotive electro plating applications, excellent balance in flow/impact |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Cycoloy® CY9640 PC+ABS PC+ ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat Aging |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® FXC810AL PC+ABS (Europe-Africa-Middle East) CYCOLOY FXC810AL is a multi-purpose PC+ABS injection moulding grade, suitable for those applications that require Alpine White colour effects. The colour package may effect performance.This data was.. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate A/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® XCY480 PC+ABS (Europe-Africa-Middle East) High flowThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® XCY620HS PC+ABS PC+ ABS General Purpose Non-FR |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® XCY620S PC+ABS (Asia Pacific) PC+ ABS Automotive applications |
|||
Vicat Softening Point | 129 °C | 264 °F | ASTM D1525 |
NOVA Chemicals Sclair® 2909 HDPE Injection Molding Resin High stiffness, Maximum impact strength and toughness, Good top loading capability, High surface glossApplications: Tote boxes, Beverage cratesAdditives: Antioxidant, Ultraviolet light stabilizersIn.. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® HFD1212 PC Copolymer 18 MFR LEXAN High Flow Ductile Copolymer |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® HFD1711 PC Copolymer 25 MFR LEXAN High Flow Ductile Copolymer |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Cycoloy® CP8930 PC+ABS (Asia Pacific) High heat, PC/ABS for automotive electro plating applications, excellent balance in flow/impact |
|||
Vicat Softening Point | 129 °C | 264 °F | VST/A/50; ISO 306 |
GEHR Plastics PE-HD Polyethylene HDPE Polyethylene has a good chemical resistance against almost all acids and bases, detergents and hot water. PE has good insulation properties and is easy to weld. The operating temperature is from -50.. |
|||
Vicat Softening Point | 129 °C | 264 °F | 49.0 N; ASTM D1525 |
MRC Polymers NAXALOYâ„¢ 770 GF16 ABS+PC Alloy, 16% Glass Fiber Filled Can be UV StabilizedInternal and external lubricant can be addedInformation provided by MRC Polymers Inc. |
|||
Vicat Softening Point | 129 °C | 264 °F | ASTM D1525 |
LyondellBasell Petrothene® LM600700 High Density Polyethylene (Blow Molding Grade) ApplicationsPETROTHENE LM 6007-00 resin exhibits very low taste and odor characteristics as well as good rigidity. Typical applications include water, and milk and juice bottles.Regulatory StatusLM.. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics NORYL PX6120 PPE+PS (Asia Pacific) Noryl PX6120 is an unfilled material with good flow, high Impact and chemical resistance against cleaners. Noryl PX6120 is developed for personal care appplications. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics NORYL PX6120 PPE+PS (Europe-Africa-Middle East) Noryl PX6120 is an unfilled material with good flow, high Impact and chemical resistance against cleaners. Noryl PX6120 is developed for personal care appplications. |
|||
Vicat Softening Point | 129 °C | 264 °F | B/50; ISO R306 |
Samsung Cheil Industries Infino® GP-3200G PBT/ABS, 20% Glass Filled PBT/ABS with 20% GF reinforcement that can be used in air-conditioner bladesInformation provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 129 °C | 264 °F | 5Kg / 50°C/hr; ISO 306B |
Styron Pulse® 2000EZ PC/ABS Engineering ResinInformation provided by DowThis product line was spun off from Dow Chemical to Styron in 2010. |
|||
Vicat Softening Point | 129 °C @Load 1.02 kg |
264 °F @Load 2.25 lb |
ISO 306 |
Borealis FL5580 High Density Polyethylene FL5580 is a high density polyethylene with an excellent combination of extrusion properties and moisture barrier properties. Applications: FL5580 has been developed especially for applications like.. |
|||
Vicat Softening Point | 129 °C | 264 °F | ASTM D1525 |
CPC - Vycom SEABOARD™ LITE High density polyethylene (HDPE) Seaboard Lite is a high density polyethylene (HDPE) sheet formulated to meet the specific requirements of marine and other outdoor environments. Seaboard Lite is UV stable and will withstand the ele.. |
|||
Vicat Softening Point | 129 °C | 264 °F | ASTM D1525 |
Dow DMDA-8904 NT 7 High Density Polyethylene Resin DOW DMDA-8904 NT 7 is produced using UNIPOL™ process technology. It is intended for use in injection molding applications such as pails, industrial parts and other shipping containers. Information.. |
|||
Vicat Softening Point | 129 °C | 264 °F | |
Dow DOWLEX™ IP-10 High Density Polyethylene Next Generation DOWLEX® IP-10 resin is a high density polyethylene resin specifically designed for reusable case applications including, poultry, fast food, automotive, retail, fresh produce, bever.. |
|||
Vicat Softening Point | 129 °C | 264 °F | |
Covestro Bayblend® T 88-2N Polycarbonate/ABS Blend, 10% Glass Fiber Contains 10% glass fiber reinforcement, high stiffness.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – .. |
|||
Vicat Softening Point | 129 °C @Load 1.02 kg |
264 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem GV0350 HDPE Blow Molding Polyethylene Copolymer HDPE GV0350 is a high-density polyethylene copolymer that has great molar mass, excellent chemical resistance, and high impact resistance and stiffness. It was developed for the blow-molding of larg.. |
|||
Vicat Softening Point | 129 °C @Load 1.02 kg |
264 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem IA59U3 HDPE Injection Molding Polyethylene Homopolymer IA59U3 is a high-density polyethylene, narrow molecular weight homopolymer produced by the solution process for injection molding applications. It offers high stiffness and impact strength combined .. |
|||
Vicat Softening Point | 129 °C | 264 °F | 50°C/hr; 50N |
Arkema Group Orgalloy® RS 6000TLA Nylon 6 Alloy, Rigid Grade (Conditioned) RS 60 series, rigid polyamide 6 alloy: easy to process, chemical resistance (no known solvents) and low moisture absorption leading to stability of mechanical, electrical and dimensional properties.. |
|||
Vicat Softening Point | 129 °C @Load 1.02 kg |
264 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem IA59 HDPE Injection Molding Polyethylene Homopolymer IA59 is a high-density polyethylene, narrow molecular weight homopolymer produced by the solution process for injection molding applications. It offers high processability and low warpage and contai.. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Xylex HX7409HP PC+POLYESTER (Asia Pacific) Low flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change (MoC), biocompatible (ISO 10993 or USP Class VI).. |
|||
Vicat Softening Point | 129 °C | 264 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® HFD1711 PC Copolymer (Asia Pacific) 25 MFR LEXAN High Flow Ductile Copolymer |
|||
Vicat Softening Point | 129 °C | 264 °F | ASTM D1525 |
Braskem BU004 Blow Molding High Density Polyethylene Containers for lubricating oils, alcohol, cosmetics and yots; Toys.Information provided by Braskem. |
|||
Vicat Softening Point | 129 °C | 264 °F | 10 N; ASTM D1525 |
Braskem Green PE SGF4960 Blow Molding and Monofilament High Density Polyethylene Description: SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased con.. |