Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 163 - 166 °C | 325 - 331 °F | ASTM D3418 |
Arkema Group Kynar Flex® 3120 PVDF Copolymer
(discontinued **) Copolymer Series, Kynar® components are used extensively in the high purity semiconductor market, the pulp and paper industry, nuclear waste processing, and the general chemical processing industry.. |
|||
Melting Point | 163 °C | 325 °F | DSC; ISO 11357-1,-3 |
Inno-Comp INNOPOL® CS 2-9000 MA N Polypropylene Copolymer INNOPOL® CS 2-9000 MA N is a high melt flow copolymer with antistatic additive.INNOPOL® CS 2-9000 MA N is developed for producing injection molded automotive components.All information provide.. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP E GF40 CC 40% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 40% Filler by WeightAdditive: Heat StabilizerFeatures: Chemically Coupled, Heat Stabilized and High Viscosit.. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP GF/M40 CC BK 40% Glass/Mineral Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Mineral, 40% Filler by WeightFeatures: Chemically CoupledAppearance: BlackInformation provided by TP Composites, Inc. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP GF20 CC HS 20% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 20% Filler by WeightAdditive: Heat StabilizerFeatures: Heat Stabilized and Chemically CoupledInformation pro.. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP GF20 CC LE 20% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 20% Filler by WeightFeatures: Chemically Coupled and Low ExtractablesInformation provided by TP Composites, .. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP GF30 TL15 30% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightAdditive: PTFE Lubricant (15%)Features: LubricatedInformation provided by TP Composites.. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP LGF50 CC NAT 12mm 50% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Long Glass Fiber, 50% Filler by WeightFeatures: Chemically CoupledInformation provided by TP Composites, Inc. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES Luriblend® PP GF20 CC GL2 BK 20% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber, 20% Filler by WeightAdditive: Graphite Powder Lubricant(2%)Features: Chemically Coupled and LubricatedAppearance: BlackInf.. |
|||
Melting Point | 163 °C | 325 °F | |
Techmer ES HiFill® PP GF30 LE 30% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 30% Filler by WeightFeatures: Low ExtractablesInformation provided by TP Composites, Inc. |
|||
Melting Point | 163 °C | 325 °F | DSC |
Total PPH 3571 Polypropylene, Film Extrusion Grade Homopolymer film gradeLow Residuals - Fina 3571 utilizes the new Fina proprietary process technology to provide extremely low residuals for improved color stability and clarity.Slip/Antiblock - Fina.. |
|||
Melting Point | 163 °C | 325 °F | ASTM D789 |
Ensinger TECAPRO™ MT Medical Grade Polypropylene (PP) TECAPRO™ MT is an FDA approved homopolymer polypropylene based material with exceptionally low residual stress to facilitate the fabrication of dimensionally stable parts with varying cross section.. |
|||
Melting Point | 163 °C | 325 °F | DIN 53 736 |
Ensinger TECAPRO™ SAN Polypropylene (PP) TECAFORM™ (Polyacetal) and TECAPRO™ SAN (Polypropylene), provide an additional safety factor in reducing incidence of bacterial contamination. The raw materials are charged with an antimicrobial .. |
|||
Melting Point | 163 °C | 325 °F | DSC; ISO 3146 |
Domo 1101M Polypropylene Homopolymer Information provided by Domo. |
|||
Melting Point | 163 °C | 325 °F | DSC; ISO 3146 |
Domo 1102J Polypropylene Homopolymer Information provided by Domo. |
|||
Melting Point | 163 °C | 325 °F | ISO 3146 |
Domo 2300K Polypropylene Copolymer Information provided by Domo. |
|||
Melting Point | 163 °C | 325 °F | ISO 3146 |
Domo 2500H Polypropylene Copolymer Information provided by Domo. |
|||
Melting Point | 163 °C | 325 °F | ASTM-D3418 |
Braskem PCD 0140BR HECO Polypropylene Heterophasic Copolymer PCD 0140BR is a low melt flow rate heterophasic copolymer with high impact resistance. This resin was developed for steel pipe coating extrusion. PCD 0140BR is highly protected against thermal aging.. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 1100 H Polypropylene, Injection Molding Grade Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 1101 P Polypropylene Data was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 2300 L Polypropylene Injection molded parts.Data was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 2340 P Polypropylene Grade with nucleating agent for injection molded parts.Data was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 2600 M Polypropylene, Injection Molding Grade Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 2600 TC Polypropylene, Injection Molding Grade Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | 10°C/min |
Arkema Group Appryl® 3120 MU 5 Polypropylene - Polyethylene Copolymer PP/PE copolymer Colored directly or during the injection molding process. This grade with a very good impact test, has been developed for interior trim automotive applications. It is UV stabilized.I.. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 1102 K Polypropylene Grade with high processing stability for film tape (low water carryover), fibrillated film, monofilaments, OPP film (special formulations) and thermoformed parts.Data was collected by ISO methods an.. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 1125 N Polypropylene Cast film with medium slip.Data was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 1126 N Polypropylene Grade with slip and antiblocking agents, for cast and water-cooled blown film with very good slip and especially low tendency to block.Data was collected by ISO methods and provided by BASF. |
|||
Melting Point | 163 °C | 325 °F | |
BASF Novolen® 2240 P Polypropylene Nucleated grade for injection moldings.Data was collected by ISO methods and provided by BASF. |