Thermal Properties | Metric | English | Comments |
---|---|---|---|
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND 1076, Part A Silicone Information provided by Chomerics |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND 4041 Part B Conductive Adhesive Information provided by Chomerics |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND SV713 Conductive Epoxy CHO-BOND® 700 Series Adhesives for Microelectronics Packaging; these pure silver-filled epoxy pastes are designed to meet the demanding requirements of semiconductor and microelectronic packaging. .. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group CT-988 Cationic UV Cure Epoxy Adhesive CT 988 is an epoxy-based, paste-viscosity, cationic-curable adhesive/sealant. This product is activated by exposure to medium intensity UV radiation resulting in a high strength, chemical resistant,.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group DP031199-1 Cationic UV Cure Epoxy Adhesive DP031199-1 is an epoxy-based, low-viscosity, cationic-curable adhesive/sealant. This product is activated by exposure to medium intensity UV radiation resulting in a strong, chemically resistant, lo.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group UV-406 High Clarity, Moisture Resistant, UV Curing Bonder UV 406 is a rapidly curing UV adhesive developed for use in bonding a variety of plastics, glass and metals, where moisture resistance and low shrinkage during cure is critical. Bond strengths on po.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group UV-422 Flexible, UV Curing Sealant UV 422 is a semi-flexible, UV curing adhesive that can be used in a wide variety of potting, sealing, tacking and bonding applications. High strength bonds are formed to PVC and polycarbonate substr.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group UV-S-2051 High Impact, UV Curable Plastic Bonder UV S-2051 is a general purpose, fast cure response, high thermal-shock resistant, UV curing adhesive designed for use in a variety of applications including chip bonding, laminating, tacking, and se.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group MX-2212 High Impact, Multi-Functional, UV Curing Adhesive This multi-functional product is a rapid setting structural adhesive. UV-MX 2212 provides high impact, resilient bonds to many similar and dissimilar substrates. Multi-functional cure bonds are form.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Uncured |
Resin Technology Group UV-403 High Clarity, Structural Polycarbonate and PVC Bonder UV 403 is a very fast UV curing adhesive developed for bonding a variety of plastics. Bond strengths on polycarbonate and rigid PVC usually exceed the strength of those substrates. Bond lines are cl.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Lord Adhesives 4 No-Mix Accelerator for 200/500 Series Lord Adhesives 4 No-Mix Accelerator for 200/500 SeriesLord Accelerator 4 is a no mix accelerator for Lord 200 and 500 series acrylic adhesives. Brush, wipe, spray or dip on one or both surfaces to b.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Lord Adhesives 7713 Adhesion Increaser to SMC Lord Adhesion Enhancers/Surface ModifiersTo meet the unique bonding demands that accompany the use of difficult-to-bond materials, the Lord Corporation offers a full line of adhesion enhancers/surfa.. |
|||
Flash Point | 93.3 °C | 200 °F | |
Lubriplate Minus 70 Petroleum-Based Heavy-Duty Hydraulic Oil ISO 15 petroleum-based oil for low temperature applications. Low Temp Hydraulic Oils are available in Jugs, Pails, 1/4 Drums & Drums.Information provided by Lubriplate |
|||
Flash Point | >= 93.3 °C | >= 200 °F | Cleveland Open Cup |
Master Bond UV15SP-1 Low Viscosity, UV Curable System Description: Master Bond UV15SP-1 is a new one component, high strength UV curable epoxy resin based polymer system for bonding, sealing, & coating with high performance properties. It is a 100% rea.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Dow BETAMATE™ 73705 Polyurethane BETAMATE™ 73705 is a one-part moisture curing polyurethane trim adhesive. It is formulated to provide adhesion to electro galvanized steel, phosphated steel, E-coated steel, and trim materials use.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Abatron L060330-2 Flexible Polyurea Compound L060330-2 is used for castings, repairs, assemblies, coatings, and laminations that require fast hardening. It is also used for bonding most rigid materials such as metals, aluminum, copper, china, .. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | ASTM Pensky-Martin |
ACC EP RAP-1567 HX EPI Engineered Polymers Aliphatic Polyurea RAP-1567 is a two component 100% solids, no VOC’s, aliphatic polyureas “Powered by ReactAmine® Technology” that was developed for UV stable (colorfast) polyurea applications. This new generation.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | ASTM Pensky-Martin |
ACC EP RAP-1567 SP-HX EPI Engineered Polymers Silicone Aliphatic Polyurea RAP-1567 SP-HX is a two component 100% solids, no VOC’s, silicone aliphatic polyureas “Powered by ReactAmine® Technology” that was developed for UV stable (colorfast) polyurea applications. This.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | ASTM Pensky-Martin |
ACC EP RASP EPI Engineered Polymers Aliphatic Silicone Polymer EP RASP Aliphatic Silicone Polyurea, “Powered by Reactamine® Technology”, is a two component 100% solid Polyurea that has excellent UV stability (colorfast) with superior performance in industria.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | 2:1 and 1:1, ASTM Pensky-Martin |
ACC EP JS EPI Engineered Polymers Joint Sealant EP JS Joint Sealant JS, “Powered by Reactamine® Technology” is a two component 100% solid (silicone optional) polyurea based joint sealant. EP JS is a self-leveling joint sealant designed to prot.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Aremco Corr-Paint™ CP2060 High Temperature Protective Coating Novolac-Epoxy, Silicon Carbide Filled This epoxy and urethane based coating is used for producing corrosion and wear resistant barriers to 500 °F. Typical applications include tanks, pipelines, boilers, precipitators, scrubbers, bag ho.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND 1053, Part B Silicone Rubber Mixture Information provided by Chomerics |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND 1073, Part A Silicone Resin Mixture Information provided by Chomerics |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Parker Chomerics CHO-BOND 2167 Part B Silicone Information provided by Chomerics |
|||
Flash Point | >= 93.3 °C | >= 200 °F | ASTM Pensky-Martin |
ACC EP RAP 45 14 EPI Engineered Polymers Aliphatic Polyurea EP RAP 45 14 Aliphatic Polyurea, “Powered by Reactamine® Technology”, is a two component 100% solids, no VOC’s, aliphatic polyurea coating that was developed for UV stable (colorfast) polyurea f.. |
|||
Flash Point | >= 93.3 °C | >= 200 °F | |
Solvay RHODASURF® BC-840 Surfactant Chemical Name: TRIDECYL ALCOHOL ETHOXYLATEDCAS: 78330-21-9Available in: Asia Pacific, Europe, Latin America and North America Applications: RHODASURF BC-840 is used for the following applications: f.. |