Processing Properties | Metric | English | Comments |
---|---|---|---|
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MCP-V40A Polyurethane Gel MCP-V40A is a polyurethane gel formulation specifically designed for padding and cushioning applications, where low rebound property of the material is critical. This viscoelastic polymer is a two.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPL-R20B Rigid Polyurethane Foam Formulation This rigid polyurethane foam system is one of a family of polymer systems developed by Northstar Polymers for specific applications. Urethane foams molded with this system exhibit closed cell struct.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-A30A Polyether Prepolymer This room-temperature-curable polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this s.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MPP-A30A Polyether Prepolymer This room-temperature-curable polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this s.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-A47A Liquid Castable Polyurethane MPP-A47A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-A50A High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MPP-A50A High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
Processing Temperature | 21.1 - 25.0 °C | 70.0 - 77.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-D65A Polyether Base Polyurethane Resin MPP-D65A is a polyether base 2-component polyurethane resin casting system for molding and potting applications. It has a long pot-life and gradual curing pattern to provide easier handling for mol.. |
|||
Processing Temperature | 21.1 - 25.0 °C | 70.0 - 77.0 °F | Curing Agent Temperature |
Northstar Polymers MPP-D65A Polyether Base Polyurethane Resin MPP-D65A is a polyether base 2-component polyurethane resin casting system for molding and potting applications. It has a long pot-life and gradual curing pattern to provide easier handling for mol.. |
|||
Processing Temperature | 21.1 - 29.4 °C | 70.0 - 85.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-F07A Easy Hand-Mixable/Pourable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing with very basic tools such as a cup and stir stick. The components are low-viscosity stable li.. |
|||
Processing Temperature | 21.1 - 29.4 °C | 70.0 - 85.0 °F | Curing Agent Temperature |
Northstar Polymers MPP-F07A Easy Hand-Mixable/Pourable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing with very basic tools such as a cup and stir stick. The components are low-viscosity stable li.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-R02C Semi-rigid Polyurethane Foam Formulation MPP-R02C is semi-rigid foam formulations for molded foam products. It is closed-cell light foam with some structural integrity. Unlike rigid polyurethane foams, the physical properties of a cured pr.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-R07B Polyurethane Formulation This foam polyurethane formulation is designed yield structural foam by either hand-mixing or machine casting method. The pot-life of this material is long enough to allow manual handling for cast-.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPS-F04A Hand-Mixable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing or by the meter dispensing equipment. The components are stable liquid at room temperature and.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPS-F06B Hand-Mixable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing or by the meter dispensing equipment. The components are stable liquid at room temperature and.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MPS-F06B Hand-Mixable Flexible Foam This foam formulation is designed to make molded flexible foam parts/sheets/dies/blocks by hand-mixing or by the meter dispensing equipment. The components are stable liquid at room temperature and.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MSB-M25F Microcellular Foam based on High Performance Polyester Polyurethane This high performance polyester microcellular foam system is one of a family of polymer systems developed by Northstar Polymers for demanding work environments. Urethane foams molded with this syste.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers VEF-41 Viscoelastic Foam Formulation Viscoelastic foam has a very unique recovery property and very low compression deflection property. When the foam is compressed by a hand it can leave imprint of the hand, and then it slowly recove.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers GK-7 Low Viscosity Polyurethane Gel Cast This material is formulated for production of thin polyurethane gel film or parts. The low viscosity property of the mixed component enables the user to cast this into a thin layer without entrappi.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MAP-R06C Semi Rigid Structural Foam Formulation MPP-R06C is a polyurethane foam formulation. It is closed-cell foam with a good structural integrity and an enhanced skin quality. Unlike polyurethane rigid foams, the physical properties of a cured.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MAP-R06C Semi Rigid Structural Foam Formulation MPP-R06C is a polyurethane foam formulation. It is closed-cell foam with a good structural integrity and an enhanced skin quality. Unlike polyurethane rigid foams, the physical properties of a cured.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MCG-1 OOO Scale Microcellular Gel Elastomer MCG-1 is formulated for making extremely soft products. MCG-1 has unique structure for this class of material. The cured product will be slightly foamed and give a very soft touch, yet faster resp.. |
|||
Processing Temperature | 21.1 - 35.0 °C | 70.0 - 95.0 °F | Prepolymer Temperature |
Northstar Polymers MPG-A25A Room-Temperature Curable Liquid Castable Polyurethane MPG-A25A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Processing Temperature | 21.1 - 35.0 °C | 70.0 - 95.0 °F | Curing Agent Temperature |
Northstar Polymers MPG-A25A Room-Temperature Curable Liquid Castable Polyurethane MPG-A25A is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Processing Temperature | 21.1 - 25.0 °C | 70.0 - 77.0 °F | Prepolymer Temperature |
Northstar Polymers MPG-D70A Room-Temperature-Curable Polyurethane Casting Elastomer MPG-D70A is room-temperature-curable polyurethane casting elastomer system designed for molding polyurethane parts with tough, but flexible physical characteristics. The typical applications for th.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Curing Agent Temperature |
Northstar Polymers MPP-A65A High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
Processing Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | Prepolymer Temperature |
Northstar Polymers MPP-A80E High Performance Polyether This high performance polyether system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system ex.. |
|||
Processing Temperature | 21.1 °C | 70.0 °F | |
Devcon Brushable Ceramic - White Epoxy Precision Repair EpoxyComments: Low-viscosity, alumina-filled, brushable epoxy compound, when applied to a 15-20 mil coating, provides a smooth, protective barrier against wear, abrasion, corrosion,.. |
|||
Processing Temperature | 21.1 °C | 70.0 °F | |
Devcon Magic Bond™ Epoxy Putty Emergency Repair ProductsComments: Two-part epoxy putty stick seals leaks and repairs gouges in steel, aluminum, wood, fiberglass, concrete and ceramics. Cures rock-hard and can be painted, sanded,.. |
|||
Processing Temperature | 21.1 °C | 70.0 °F | |
Devcon Wear Guard (High Temp) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |