Processing Properties | Metric | English | Comments |
---|---|---|---|
Front Barrel Temperature | 250 °C | 482 °F | |
Multibase TPSiV™ 1180-50D Thermoplastic Silicone Vulcanizate These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 1417HS PA 6 impact modified, heat stabilized, medium high impact strengthInformation provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 2012 Copolymer Nylon easy flowing, exceptional toughness and flexibility with lower water absorptionInformation provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 2047 Copolymer Nylon 6/69 extrusion, high melt viscosity. & strength., low crystallinity Information provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 27/300I Glass Filled Nylon 6 30% glass filled, flame retardant to UL 94 V-0 nylon 6Information provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 27/330KNF Glass Filled Nylon 6 33% glass filled, heat stabilized nylon 6Information provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 534H PA 6 high viscosity, heat stabilized, nucleated nylon for tubing, sheet, film and moldingInformation provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 567 PA 6 plasticized general purpose molding and extrusion grade used in shoe heels and mono.Information provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 578 PA 6 very high viscosity molding & extrusion grade for tubing, pipes, film and tapesInformation provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
NYCOA 7551 Copolymer Nylon Alloy resistant to zinc chloride and other automotive fluids, good adhesion to olefins, mold & extrusion.Information provided by NYCOA, Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | For high temperature coextrusions. |
DuPont Bynel® 41E689 Adhesive Resin
(discontinued **) Bynel® Series 4100 resins are anhydride-modified linear low-density polyethylene (LLDPE) resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment design.. |
|||
Front Barrel Temperature | 250 - 270 °C | 482 - 518 °F | Start Point: 260°C |
Kingfa LONOY 6100 Flame Retardant PC/PBT Alloy Features:Excellent balance propertiesGood weather resistanceGood size stabilitySmooth surfaceUniform colorApplications:Injection moldingElectric and electronic partsBusiness machine cabinetGarden to.. |
|||
Front Barrel Temperature | 250 - 260 °C | 482 - 500 °F | Start Point: 240°C |
Kingfa PC-S609 Toughened PC Features:Good mechanical propertiesSuper high impact strengthGood weather resistanceHigh glossGood processing propertiesStress cracking propertiesApplications:OA and IT partsAutomobile accessoriesEl.. |
|||
Front Barrel Temperature | 250 - 270 °C | 482 - 518 °F | |
LG Chemical Lupox® PBT-HI1002F Impact Modified, Flame Retardant PBT Alloy Information provided by US distributor Polymer Technology and Services, LLC (PTS). |
|||
Front Barrel Temperature | 250 - 290 °C | 482 - 554 °F | |
LG Chemical LUPOY GP-5200 General Purpose PC/ABS Alloy, 10% Polymer Alloy, High Strength Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive.. |
|||
Front Barrel Temperature | 250 - 280 °C | 482 - 536 °F | Injection Molding |
LG Chemical LUPOY HP5004A PC/ABS Description: Injection Molding, PC/ABS, General Purpose, Good Weld Properties, High Impact (at Low Temperature), Heat ResistanceApplication: Mobile Phone HousingCAS: 103598-77-2, 9003-56-9 and 18102.. |
|||
Front Barrel Temperature | 250 - 280 °C | 482 - 536 °F | |
MRC Polymers NAXALOYâ„¢ 780 GF11 PC+PBT Polyester Blend, 11% Glass Fiber Filled Good chemical resistance, impact and heat resistanceAvailable in Black OnlyCan be UV StabilizedInternal and external lubricant can be added.Information provided by MRC Polymers Inc. |
|||
Front Barrel Temperature | 250 °C | 482 °F | |
Multibase Multi-Flex® D 5304 Black TPO Thermoplastic Polyolefin Elastomer Forms: PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Front Barrel Temperature | 250 - 265 °C | 482 - 509 °F | Injection Molding |
LG Chemical LUPOY GP1000SW PC, Transparent Description: Injection Molding, PC, General Purpose, TransparencyApplication: Keypad for Mobile Phone, Automotive (Interior)CAS: 103598-77-2Information provided by LG Chemical |
|||
Front Barrel Temperature | 250 - 255 °C | 482 - 491 °F | |
Solvay Technyl® C 218 MT25 V15 25% Mineral, 15% Glass Filled, Heat Stabilized Nylon 6 Information provided by Rhodia; Rhodia has been acquired by Solvay. |
|||
Front Barrel Temperature | 250 - 280 °C | 482 - 536 °F | |
Teknor Apex Beetle® PBTC115F Polybutylene Terephthalate and Polyethylene Terephthalate Notes: PBTC115F is a 15% glass fiber reinforced PBT/PET alloy. It provides a good balance of mechanical performance and thermal endurance with excellent surface finish and mold release. Features: G.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | For high temperature coextrusions. |
DuPont Bynel® 4157 Adhesive Resin Bynel® Series 4100 resins are anhydride-modified linear low-density polyethylene (LLDPE) resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment design.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | Cast film |
DuPont Elvaloy® 1125 AC Ethylene and 25% Methyl Acrylate Copolymer Elvaloy® 1125 AC is intended for coextrusion and molding. It can be recommended for blow molding of parts requiring permanent flexibility, stress cracking resistance and softness. Excellent fill.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | Cast film |
DuPont Elvaloy® 3117 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3117 AC is intended for coextrusion and compounding. Due to its high melt flow rate, it is used also in extrusion coating. Elvaloy® 3117 AC is soft, flexible and has good adhesion to va.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | Cast film |
DuPont Elvaloy® 3217 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3217 AC contains antioxidant, slip and antiblock additives.Elvaloy® 3217 AC has been developed for film applications requiring a combination of softness, toughness and low friction. Typi.. |
|||
Front Barrel Temperature | 250 - 270 °C | 482 - 518 °F | |
Unitika UM-8430RG Characteristics: High dimensional accuracy (circularity and planarity) Large warping resistance Low linear expansion coefficientInformation provided by Unitika Ltd. |
|||
Front Barrel Temperature | 250 - 270 °C | 482 - 518 °F | Zone 3 |
Eurostar Starflam PK0022E PA6, 10% Mineral Filled, Injection Molded PK0022E is a Halogen Free and Phosphorous Free, Mineral Filed, Polyamide 6 Injection Molding (also known as PM3620Z22 or PA 10E6 U9 Z22)Information provided by Polymer Technology & Services, the Nor.. |
|||
Front Barrel Temperature | 250 - 270 °C | 482 - 518 °F | Zone 3 |
Eurostar Starflam PF0057E PA6, 25% Glass Filled, Injection Molded Halogen Free and Red Phosphorous Free, Flame Retardant, Glass Fiber Reinforced, Polyamide 6 Injection Molding Resin (also known as PF-1005 Z270)Information provided by Polymer Technology & Services,.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | For high temperature coextrusions. |
DuPont Bynel® 41E712 Adhesive Resin
(discontinued **) Bynel® Series 4100 resins are anhydride-modified linear low-density polyethylene (LLDPE) resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment design.. |
|||
Front Barrel Temperature | 250 °C | 482 °F | Cast film |
DuPont Elvaloy® 3108 AC Ethylene and 7% Butyl Acrylate Copolymer
(discontinued **) Elvaloy® 3108 AC contains antioxidant, slip and antiblock additives.Elvaloy® 3108 AC is developed to give films with good sealing properties, impact strength at lower temperature, and low shrinkag.. |