Braskem HF 0150 HDPE Blown Film Extrusion Polyethylene

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Film Grade
Manufacturer	Braskem
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Braskem HF 0150 HDPE Blown Film Extrusion Polyethylene.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags. Information provided by Braskem

Physical Properties	Metric	English	Comments
Density	0.948 g/cc	0.0342 lb/in³	ASTM D1505
Thickness	38.0 microns	1.50 mil
Melt Flow	0.45 g/10 min @Load 5.00 kg, Temperature 190 °C	0.45 g/10 min @Load 11.0 lb, Temperature 374 °F	ASTM D1238
High Load Melt Index	10 g/10 min @Load 21.6 kg, Temperature 190 °C	10 g/10 min @Load 47.6 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	23.0 MPa	3340 psi	ASTM D882
Film Tensile Strength at Yield, TD	27.0 MPa	3920 psi	ASTM D882
Film Elongation at Break, MD	571 %	571 %	ASTM D882
Film Elongation at Break, TD	832 %	832 %	ASTM D882
Elmendorf Tear Strength, MD	0.600 g/micron	15.2 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	4.10 g/micron	104 g/mil	ASTM D1922
Dart Drop	3.13 g/micron	79.5 g/mil	ASTM D1709
Film Tensile Strength at Break, MD	57.0 MPa	8270 psi	ASTM D882
Film Tensile Strength at Break, TD	54.0 MPa	7830 psi	ASTM D882
Heat Seal Strength Initiation Temperature	125 °C	257 °F	Sealing Initial Temperature; Braskem® Method

Descriptive Properties	Value	Comments
Minimum Recommended Thickness	13 µm
Puncture Strength	71 J/m	Braskem® Method

Users viewing this material also viewed the following: