DuPont Performance Polymers Zytel® FE270038 BK267 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass/Mineral Filled
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® FE270038 BK267 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Zytel® FE270038 is a 40% glass fiber/mineral reinforced, heat stabilized polyamid 66 for injection molding. It is well suited for water injection technology.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.46 g/cc	0.0527 lb/in³	DAM; ISO 1183
Water Absorption	1.5 % @Thickness 1.00 mm, Temperature 23.0 °C	1.5 % @Thickness 0.0394 in, Temperature 73.4 °F	Equilibrium 50%RH; DAM; ISO 62, Similar to
	5.0 % @Thickness 1.00 mm, Temperature 23.0 °C	5.0 % @Thickness 0.0394 in, Temperature 73.4 °F	Saturation, immersed; DAM; ISO 62, Similar to
Linear Mold Shrinkage, Flow	0.0030 cm/cm @Thickness 2.00 mm	0.0030 in/in @Thickness 0.0787 in	DAM; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0070 cm/cm @Thickness 2.00 mm	0.0070 in/in @Thickness 0.0787 in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	110 MPa @Temperature 23.0 °C	16000 psi @Temperature 73.4 °F	50%RH; ISO 527
	145 MPa @Temperature 23.0 °C	21000 psi @Temperature 73.4 °F	DAM; ISO 527
Elongation at Break	2.5 % @Temperature 23.0 °C	2.5 % @Temperature 73.4 °F	DAM; ISO 527
	2.6 % @Temperature 23.0 °C	2.6 % @Temperature 73.4 °F	50%RH; ISO 527
Tensile Modulus	7.80 GPa @Temperature 23.0 °C	1130 ksi @Temperature 73.4 °F	50%RH; ISO 527
	8.80 GPa @Temperature 23.0 °C	1280 ksi @Temperature 73.4 °F	DAM; ISO 527
Charpy Impact Unnotched	4.10 J/cm² @Temperature 23.0 °C	19.5 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eU
	4.10 J/cm² @Temperature 23.0 °C	19.5 ft-lb/in² @Temperature 73.4 °F	50%RH; ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm² @Temperature 23.0 °C	1.90 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eA
	0.400 J/cm² @Temperature 23.0 °C	1.90 ft-lb/in² @Temperature 73.4 °F	50%RH; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	60.0 µm/m-°C @Temperature 23.0 - 55.0 °C	33.3 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
Melting Point	245 °C	473 °F	10°C/min; DAM; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi)	230 °C	446 °F	DAM; ISO 75-1/-2
Glass Transition Temp, Tg	90.0 °C	194 °F	10°C/min; DAM; ISO 11357-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+12 ohm-cm @Temperature 23.0 °C	2.00e+12 ohm-cm @Temperature 73.4 °F	50%RH; IEC 60093
	8.00e+14 ohm-cm @Temperature 23.0 °C	8.00e+14 ohm-cm @Temperature 73.4 °F	DAM; IEC 60093
Surface Resistance	3.00e+14 ohm @Temperature 23.0 °C	3.00e+14 ohm @Temperature 73.4 °F	50%RH; IEC 60093

Processing Properties	Metric	English	Comments
Melt Temperature	280 - 300 °C	536 - 572 °F	DAM
	290 °C	554 °F	DAM; Optimum
Mold Temperature	70.0 - 120 °C	158 - 248 °F	DAM
	100 °C	212 °F	DAM; optimum
Drying Temperature	80.0 °C	176 °F	DAM
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	DAM
Moisture Content	<= 0.20 %	<= 0.20 %	DAM

Descriptive Properties	Value	Comments
Forms	Pellets	DAM
Material Status	Preliminary Data	DAM
Processing Method	Injection Molding	DAM
Product Category	Glass Reinforced Resins	DAM
	Glass/Mineral Reinforced Resins	DAM
RoHS Compliance	Contact Manufacturer	DAM

Users viewing this material also viewed the following: