- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Ensinger Tecamid® MDS® Molybdenum Disulfide Filled Nylon (PA)
Ensinger Tecamid® MDS® Molybdenum Disulfide Filled Nylon (PA)
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Ensinger |
| Trade Name | Tecamid® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ensinger Tecamid® MDS® Molybdenum Disulfide Filled Nylon (PA).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Tecamid MDS® has enhanced surface lubricity and wear resistance over unfilled nylon. It is an ideal material to replace metals in machinery. Low surface friction Increased surface hardness Increased heat resistance Higher tensile properties Improved dimensional stability Information provided by Ensinger, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
| Water Absorption | 1.2 - 2.5 % | 1.2 - 2.5 % | at 24 hours; ASTM D570 |
| Water Absorption at Saturation | 7.5 - 8.5 % | 7.5 - 8.5 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength, Yield | 75.8 MPa | 11000 psi | ASTM D638 |
| Elongation at Break | 15 % | 15 % | ASTM D638 |
| Tensile Modulus | 3.10 GPa | 450 ksi | ASTM D638 |
| Izod Impact, Notched | 1.12 J/cm | 2.10 ft-lb/in | ASTM D256 |
| K (wear) Factor | 383 x 10-8 mm³/N-M | 190 x 10-10 in³-min/ft-lb-hr | 40 psi, 50 fpm; ASTM D3702 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 72.0 µm/m-°C @Temperature 20.0 °C |
40.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Specific Heat Capacity | 1.67 J/g-°C | 0.400 BTU/lb-°F | |
| Melting Point | 255 °C | 491 °F | ASTM D2133 |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Long Term; ASTM UL746B |
| 179 °C | 355 °F | Intermittent | |
| Deflection Temperature at 0.46 MPa (66 psi) | 243 °C | 470 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.5 @Frequency 60 Hz |
2.5 @Frequency 60 Hz |
ASTM D150 |
| Dielectric Strength | 1.18 kV/mm | 30.0 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved