POLYMER SEARCH

Plastcom SLOVAMID 6 BT Polyamide 6

Category	Polymer , Thermoplastic , Nylon , Nylon 6
Manufacturer	Plastcom spol. s r.o.
Trade Name	SLOVAMID
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plastcom SLOVAMID 6 BT Polyamide 6.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FeaturesBasic type PA 6 for injection moulding, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, hobby tools, toys. Delivered in the natural and in the full RAL color scale.Application: Injection MouldingInformation Provided by Plastcom spol. s r.o.

Physical Properties	Metric	English	Comments
Density	1.12 g/cc	0.0405 lb/in³	STN 64 0111
Linear Mold Shrinkage	0.018 cm/cm	0.018 in/in	STN 64 0808
Linear Mold Shrinkage, Transverse	0.0183 cm/cm	0.0183 in/in	STN 64 0808
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 230 °C	6.0 g/10 min @Load 4.76 lb, Temperature 446 °F	STN EN ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	85.0 MPa	12300 psi	STN EN ISO 527-2
Elongation at Break	3.5 %	3.5 %	STN EN ISO 527-2
Tensile Modulus	3.10 GPa	450 ksi	STN EN ISO 527-2
Flexural Strength	115 MPa	16700 psi	STN EN ISO 178
Flexural Modulus	2.70 GPa	392 ksi	STN EN ISO 178
Charpy Impact Unnotched	8.00 J/cm² @Temperature -20.0 °C	38.1 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
	12.0 J/cm² @Temperature 23.0 °C	57.1 ft-lb/in² @Temperature 73.4 °F	STN EN ISO 179
Charpy Impact, Notched	0.150 J/cm² @Temperature -20.0 °C	0.714 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
	0.160 J/cm² @Temperature 23.0 °C	0.761 ft-lb/in² @Temperature 73.4 °F	STN EN ISO 179

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	DSC; STN EN ISO 3146
Deflection Temperature at 1.8 MPa (264 psi)	50.0 °C	122 °F	STN EN ISO 75/A
Vicat Softening Point	190 °C	374 °F	B; STN EN ISO 306
Flammability, UL94	HB	HB
Glow Wire Test	960 °C	1760 °F	STN IEC 60695-2-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	STN IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	STN IEC 60093
Dielectric Strength	18.0 kV/mm	457 kV/in	STN IEC 60243
Comparative Tracking Index	600 V	600 V	STN 34 6468

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 270 °C	482 - 518 °F
Mold Temperature	60.0 - 80.0 °C	140 - 176 °F
Drying Temperature	80.0 °C	176 °F
Dry Time	4 hour	4 hour
Moisture Content	0.15 %	0.15 %	STN EN ISO 960
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi

Users viewing this material also viewed the following: