Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
SABIC Innovative Plastics Cycoloy® XCM850 PC+ABS (Asia Pacific) Reinforced PC/ABS with high stiffness and low CTE. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
PolyOne Geon™ Vinyl Flexible R148CE Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
PolyOne Edgetek® XT XT-115GF-AX01-HF PC+PBT with Glass Fiber Reinforcement
(discontinued **) EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Eastman Eastar GN125 Copolyester, Natural
(discontinued **) Eastar Copolyester GN125 is a glycol modified polyethylene terephthalate (PET) that contains an ultraviolet light inhibitor. This product is recommended for indoor applications requiring enhanced co.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Solvay Specialty Polymers KetaSpire® KT-851 Polyetheretherketone (PEEK)
(Unverified Data**) KetaSpire KT-851 resin is a depth-filtered grade of polyetheretherketone (PEEK) specially designed for use in extruded wire insulation coating. KT-851 offers the needed balance of properties and pro.. |
|||
Specific Gravity | 1.30 - 1.36 g/cc | 1.30 - 1.36 g/cc | ASTM D792 |
S&E Specialty Polymers TufTech™ GA-1050-02LF PVC Compound Application: A 105°C, AWM, 90°C AWM 1,000 volt, flame retardant compound.Information provided by S&E Specialty Polymers |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Quadrant EPP Duratron® PBI CU60 Polybenzimidazole, unfilled, compression molded (ASTM Product Data Sheet) Duratron® PBI is the highest performance engineering plastic available from Quadrant EPP. It offers the highest mechanical properties of any thermoplastic above 400° F (205° C). Duratron® PBI .. |
|||
Specific Gravity | 1.30 - 1.36 g/cc | 1.30 - 1.36 g/cc | |
Dow BETADAMP™ 32HT
(discontinued **) BETADAMP™ 32HT is a high temperature vibration damper that can be applied to the exterior of cast aluminum or steel engine valve, transmission, and crankcase (oil pan) covers or electro-coat substr.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Fiberfil® PP-60/TC/40/OP WT2595 Polypropylene Homopolymer, 40% Talc Filled, high opacity Information provided by FIBERFIL Engineered Plastics |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
LG Chemical LUMID GP2200B(W) PA66+GF20%, General Purpose Feature: Injection Molding, PA66+GF20%, General PurposeApplication: Automotive PartsCAS No. 32131-17-2 and 65997-17-3Information provided by LG Chemical |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Metabolix Mirel™ F1006 Injection Molding Grade PHA Bioplastic Mirel F1006 is FDA cleared for use in non-alcoholic food contact applications, from frozen food storage and microwave reheating to boiling water up to 212°F. FDA clearance includes products such.. |
|||
Specific Gravity | 1.30 - 1.32 g/cc | 1.30 - 1.32 g/cc | ASTM D792 |
Gromax PBT 1100-211L Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce.. |
|||
Specific Gravity | 1.30 - 1.32 g/cc | 1.30 - 1.32 g/cc | ASTM D792 |
Gromax PBT 1100-211XG Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
SABIC Innovative Plastics ULTEM AUT230 PEI (Europe-Africa-Middle East) Transparent polyetherimide (Tg 247 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D 792 |
SABIC Innovative Plastics LNP Thermocomp RF004S PA 66 LNP* Thermocomp* RF004S is a Nylon 6/6 containing Glass Fiber. Characteristics are Heat Stabilized.This data was supplied by SABIC-IP for the Americas region. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Teknor Apex Flexalloy® 9604-75 Polyvinyl Chloride, Elastomer Notes: 105°C Jacket; RoHS Compliant Features: Flame Retardant; High Heat Resistance; Low Temperature Flexibility; Sunlight Resistant (720 hours) Uses Cable Jacketing Wire Types: SEOW; SEW; SJEOW;.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP ZF006 PPE+PS LNP* THERMOCOMP* ZF006 is a compound based on PPE+PS resin containing 30% Glass Fiber. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | |
Trelleborg R525 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Cheng Yu Plastic N6GV30 Flame Retardant Nylon 6, 30% Glass Filled |
|||
Specific Gravity | 1.30 - 1.34 g/cc | 1.30 - 1.34 g/cc | ASTM D792 |
Compuestos Dominicanos Polycom BD-330699 PVC Compound The polycom BD series are compounds for blow molding of PVC bottles suitable for the packaging of edible oil, water, cleaning products and lubricants. These compounds produce bottles with high clar.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ISO 1183 |
Azoty Tarnow™ Tarnamid® T-27 MX6 Polyamide 6 - Flame Retarded, Reinforced Flame retarded grade, reinforced with 10% hybrid mineral-glass fibers, without addition of any halogen compounds, red phosphorus and asbestos, doesn't release any toxic gases during burning, good su.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
Cheng Yu Plastic ML3415 PC, 15% Glass Fiber |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | mixed, uncured |
Atom Adhesives AA-SUPERTHERM 195 Epoxy Adhesive AA-SUPERTHERM 195 is a two component, thermally conductive epoxy system recommended for staking transistors, diodes, resistors, integrated circuits and other heat sensitive components to printed cir.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N220 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
PolyOne Geon™ Vinyl Wire & Cable W1201 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide.. |
|||
Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
PolyOne Edgetek® PF-10GF/000 Polysulfone, Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedUL 94 V0PolyOne First ChoiceInformation provided by PolyOne Corporation. |