DuPont Performance Polymers Minlon® 11C40 BKB086 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 40% Mineral Filled
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Minlon® 11C40 BKB086 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Minlon® 11C40 BKB086 is a 40% mineral reinforced, heat stabilized, black polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Specific Gravity	1.47 g/cc	1.47 g/cc	DAM; ASTM D792
Density	1.47 g/cc	0.0531 lb/in³	DAM; ISO 1183
Filler Content	40 %	40 %	DAM
Water Absorption	1.1 % @Temperature 23.0 °C	1.1 % @Temperature 73.4 °F	Immersion 24h; DAM; ISO 62, Similar to
Linear Mold Shrinkage	0.0090 cm/cm @Thickness 1.60 mm	0.0090 in/in @Thickness 0.0630 in	Flow; DAM
	0.0090 cm/cm @Thickness 3.20 mm	0.0090 in/in @Thickness 0.126 in	Flow; DAM
	0.0090 cm/cm @Thickness 1.60 mm	0.0090 in/in @Thickness 0.0630 in	Transverse; DAM
	0.0090 cm/cm @Thickness 3.20 mm	0.0090 in/in @Thickness 0.126 in	Transverse; DAM
	0.014 cm/cm @Thickness 6.40 mm	0.014 in/in @Thickness 0.252 in	Flow; DAM
	0.014 cm/cm @Thickness 6.40 mm	0.014 in/in @Thickness 0.252 in	Transverse; DAM
Linear Mold Shrinkage, Flow	0.0090 cm/cm @Thickness 2.00 mm	0.0090 in/in @Thickness 0.0787 in	DAM; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0090 cm/cm @Thickness 2.00 mm	0.0090 in/in @Thickness 0.0787 in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	86.0 MPa @Temperature 23.0 °C	12500 psi @Temperature 73.4 °F	DAM; ISO 527
Tensile Strength	85.0 MPa @Temperature 23.0 °C	12300 psi @Temperature 73.4 °F	DAM; ASTM D638
Elongation at Break	10 % @Temperature 23.0 °C	10 % @Temperature 73.4 °F	DAM; ISO 527
	15 % @Temperature 23.0 °C	15 % @Temperature 73.4 °F	DAM; ASTM D638
Tensile Modulus	5.80 GPa @Temperature 23.0 °C	841 ksi @Temperature 73.4 °F	DAM; ISO 527
Flexural Modulus	5.24 GPa @Temperature 23.0 °C	760 ksi @Temperature 73.4 °F	DAM; ASTM D790
	5.30 GPa @Temperature 23.0 °C	769 ksi @Temperature 73.4 °F	DAM; ISO 178
Izod Impact, Notched	0.690 J/cm @Temperature 23.0 °C	1.29 ft-lb/in @Temperature 73.4 °F	DAM; ASTM D256
Izod Impact, Unnotched	16.0 J/cm @Temperature 23.0 °C	30.0 ft-lb/in @Temperature 73.4 °F	DAM; ASTM D4812
Izod Impact, Notched (ISO)	5.00 kJ/m² @Temperature -40.0 °C	2.38 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 180/1A
	6.00 kJ/m² @Temperature 23.0 °C	2.86 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)	95.0 kJ/m² @Temperature 23.0 °C	45.2 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 180/1U
Charpy Impact Unnotched	18.0 J/cm² @Temperature 23.0 °C	85.7 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eU
Charpy Impact, Notched	0.300 J/cm² @Temperature -40.0 °C	1.43 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 179/1eA
	0.600 J/cm² @Temperature 23.0 °C	2.86 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	500 µm/m-°C @Temperature -40.0 - 23.0 °C	278 µin/in-°F @Temperature -40.0 - 73.4 °F	DAM; ASTM E 831
	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ASTM E 831
	500 µm/m-°C @Temperature 55.0 - 160 °C	278 µin/in-°F @Temperature 131 - 320 °F	DAM; ASTM E 831
	500 µm/m-°C @Temperature -40.0 - 23.0 °C	278 µin/in-°F @Temperature -40.0 - 73.4 °F	DAM; ISO 11359-1/-2
	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
	500 µm/m-°C @Temperature 55.0 - 160 °C	278 µin/in-°F @Temperature 131 - 320 °F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	53.0 µm/m-°C @Temperature -40.0 - 23.0 °C	29.4 µin/in-°F @Temperature -40.0 - 73.4 °F	DAM; ASTM E 831
	53.0 µm/m-°C @Temperature -40.0 - 23.0 °C	29.4 µin/in-°F @Temperature -40.0 - 73.4 °F	DAM; ISO 11359-1/-2
	65.0 µm/m-°C @Temperature 23.0 - 55.0 °C	36.1 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ASTM E 831
	65.0 µm/m-°C @Temperature 23.0 - 55.0 °C	36.1 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
	98.0 µm/m-°C @Temperature 55.0 - 160 °C	54.4 µin/in-°F @Temperature 131 - 320 °F	DAM; ASTM E 831
	98.0 µm/m-°C @Temperature 55.0 - 160 °C	54.4 µin/in-°F @Temperature 131 - 320 °F	DAM; ISO 11359-1/-2
Melting Point	256 °C	493 °F	10°C/min; DAM; ISO 11357-1/-3
	258 °C	496 °F	DAM; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	210 °C	410 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	90.0 °C	194 °F	DAM; ISO 75-1/-2
	90.0 °C	194 °F	DAM; ASTM D648
UL RTI, Electrical	65.0 °C @Thickness 0.810 mm	149 °F @Thickness 0.0319 in	DAM; UL 746B
	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	DAM; UL 746B
UL RTI, Mechanical with Impact	65.0 °C @Thickness 0.810 mm	149 °F @Thickness 0.0319 in	DAM; UL 746B
	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	DAM; UL 746B
UL RTI, Mechanical without Impact	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	DAM; UL 746B
	65.0 °C @Thickness 0.810 mm	149 °F @Thickness 0.0319 in	DAM; UL 746B
Flammability, UL94	HB @Thickness 0.810 mm	HB @Thickness 0.0319 in	DAM; IEC 60695-11-10
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; UL94
	HB @Thickness 0.810 mm	HB @Thickness 0.0319 in	DAM; UL94

Processing Properties	Metric	English	Comments
Melt Temperature	295 °C	563 °F	DAM; Optimum
	285 - 305 °C	545 - 581 °F	DAM
Mold Temperature	70.0 - 120 °C	158 - 248 °F	DAM
	100 °C	212 °F	DAM; optimum
Drying Temperature	80.0 °C	176 °F	DAM
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	DAM
Moisture Content	<= 0.20 %	<= 0.20 %	DAM

Descriptive Properties	Value	Comments
Additive	Heat Stabilizer	DAM
Appearance	Black Color	DAM
Drying Recommended	Yes, if moisture content of resin exceeds recommended level	DAM
Features	Heat Resistance, Good	DAM
	Heat Resistance, Good	DAM
	Warpage, Low	DAM
Filler	Mineral filler	DAM
Forms	Pellets	DAM
Generic	Nylon 66	DAM
Heat Stabilized	Yes	DAM
Material Status	Current	DAM
Part Marking Code	>PA66-IMD40<	ISO 11469; DAM
Polymer Family	Polyamide	DAM
Polymer Type	PA66	DAM
Processing Method	Injection Molding	DAM
Product Category	Low Warp Resins	DAM
	Mineral Reinforced Resins	DAM
Resin Identification	PA66-IMD40	ISO 1043; DAM
RoHS Compliance	Contact Manufacturer	DAM
Ultrasonic Weldable	Yes	DAM
Uses	Appliance Components	DAM
	Automotive Applications	DAM
	Gears	DAM
	Industrial Applications	DAM

Users viewing this material also viewed the following: