Ineos ABS LustranÂ® 266 ABS, Transparent Grade

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Transparent, Molded
Manufacturer	Ineos ABS
Trade Name	Lustran®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos ABS LustranÂ® 266 ABS, Transparent Grade.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

LustranÂ® ABS 266 resin is a clear injection molding grade of ABS (acrylonitrile butadiene styrene). This transparent, general-purpose grade provides clarity and toughness with ease of processing. The resin is available in transparent tint, color code 000000. A tough, transparent grade of ABS, LustranÂ® ABS 266 resin is used in housings, toys, lawn and garden applications, and various consumer goods.

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/inÂ³	ASTM-D792
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	ASTM-D955
Melt Flow	5.0 g/10 min @Load 3.80 kg, Temperature 230 Â°C	5.0 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM-D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	108	108	ASTM-D785
Tensile Strength at Break	30.0 MPa	4350 psi	ASTM-D638
Tensile Strength, Yield	37.0 MPa	5370 psi	ASTM-D638
Elongation at Break	>= 48 %	>= 48 %	ASTM-D638
Elongation at Yield	4.0 %	4.0 %	ASTM-D638
Tensile Modulus	2.00 GPa	290 ksi	ASTM-D638
Flexural Yield Strength	59.0 MPa	8560 psi	ASTM-D790
Flexural Modulus	1.80 GPa	261 ksi	ASTM-D790
Izod Impact, Notched	1.76 J/cm @Thickness 3.20 mm	3.30 ft-lb/in @Thickness 0.126 in	ASTM-D256

Thermal Properties	Metric	English	Comments
CTE, linear	121 Âµm/m-Â°C	67.2 Âµin/in-Â°F	ASTM-D696
Deflection Temperature at 0.46 MPa (66 psi)	87.0 Â°C @Thickness 3.20 mm	189 Â°F @Thickness 0.126 in	Unannealed; ASTM-D648
	94.0 Â°C @Thickness 12.7 mm	201 Â°F @Thickness 0.500 in	Unannealed; ASTM-D648
Deflection Temperature at 1.8 MPa (264 psi)	73.0 Â°C @Thickness 3.20 mm	163 Â°F @Thickness 0.126 in	Unannealed; ASTM-D648
	82.0 Â°C @Thickness 12.7 mm	180 Â°F @Thickness 0.500 in	Unannealed; ASTM-D648
UL RTI, Electrical	50.0 Â°C @Thickness 1.50 mm	122 Â°F @Thickness 0.0591 in	UL746B
UL RTI, Mechanical with Impact	50.0 Â°C @Thickness 1.50 mm	122 Â°F @Thickness 0.0591 in	UL746B
UL RTI, Mechanical without Impact	50.0 Â°C @Thickness 1.50 mm	122 Â°F @Thickness 0.0591 in	UL746B
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	Clear Color
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	Clear Color

Optical Properties	Metric	English	Comments
Refractive Index	1.52	1.52	ASTM-D542
Haze	3.0 % @Thickness 2.54 mm	3.0 % @Thickness 0.100 in	ASTM-D1003
Transmission, Visible	86 % @Thickness 2.54 mm	86 % @Thickness 0.100 in	ASTM-D1003

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	195 - 220 Â°C	383 - 428 Â°F	Injection Molding
Middle Barrel Temperature	200 - 225 Â°C	392 - 437 Â°F	Injection Molding
Front Barrel Temperature	205 - 230 Â°C	401 - 446 Â°F	Injection Molding
Nozzle Temperature	205 - 230 Â°C	401 - 446 Â°F	Injection Molding
Melt Temperature	205 - 230 Â°C	401 - 446 Â°F	Injection Molding
Mold Temperature	45.0 - 65.0 Â°C	113 - 149 Â°F	Injection Molding
Drying Temperature	71.0 - 77.0 Â°C @Time 14400 sec	160 - 171 Â°F @Time 4.00 hour
	82.0 - 88.0 Â°C @Time 7200 sec	180 - 190 Â°F @Time 2.00 hour
Moisture Content	<= 0.10 %	<= 0.10 %
Dew Point	<= -29.0 Â°C	<= -20.2 Â°F	inlet air
Injection Pressure	68.9 - 110 MPa	10000 - 16000 psi	Injection Molding
Back Pressure	0.000 - 0.172 MPa	0.000 - 25.0 psi	Injection Molding
Clamp Pressure	30.8 - 61.6 MPa	4470 - 8930 psi	Injection Molding
Cushion	<= 0.635 cm	<= 0.250 in	Injection Molding

Descriptive Properties	Value	Comments
Hold Pressure	50-75% of Injection Pressure, Injection Molding
Injection Speed	High	Injection Molding
Screw Compression Ratio	2.5:1	Injection Molding
Screw Length-to-Diameter Ratio	>= 20:1	Injection Molding
Screw Speed	Moderate, Injection Molding
Shot Weight-to-Machine Capacity Ratio	0.5-0.75	Injection Molding

Users viewing this material also viewed the following: